Want to see how we rigged an all natural line on Half Dome? Check this episode out because we also show you a 2 litter bottle full of poop! Thank you Michael Melner for filming me on top of half dome while I kept screwing up, you are a champ! Thank you Scott Hong for the video footage and teaching me more artistic editing. Thank you Garrison Rowland for inspiring me to push my limits and congrats on a full man onsight. Thank you Kim Weglin for doing cool shit and being pretty when you do it! Love you! Buy SlacklifeBC's Skypilot webbing at http://slacklifebc.com/products/webbing/skypilot-nylon/ Buy the Ultralight Zerge Outdoor leash ring at http://zergeoutdoor.com/product/zero-gold-ultralight-ring/ Watch the Zerge video at https://www.youtube.com/watch?v=LZ2mfN8cZ4A
You want to see how we rigged an all-natural line on Half Dome?
Check it out on this episode of How Not to Highline.
I'm Ryan Jinks, and welcome to my garage.
Check out what we did on Half Dome.
Want to see how we rigged it?
Well, I guess that's why you're here.
Max Silver and Preston Alden established this 200-foot
variation on Half Dome last year.
It's a line that's rigged all naturally,
which is wrapping boulders rather than using bolts.
For this 200-foot line, we used Double Feather Pro
and about 500 feet of static rope to build our anchor.
And congratulations to Garrison
for getting an on-site full man,
which means he walked both directions without falling once.
And I almost got an on-site, but I fell in the last node.
Then I started over and got the full man without falling.
And this was really exciting for me,
because back in 2009, before I sent my first highline,
I saw a Patagonia postcard that had a guy walking
on a highline all the way up on Half Dome.
Back then, that highline looked huge,
and I think it was only about 130 feet.
And that junk mail was my main inspiration
to pursue highlining at the level I did.
So getting a full man the longest line up there
was an incredible experience.
And before I show you guys how we rigged that,
I just wanna let you know that Slacklife BC's SkyPilot
nylon webbing is gonna have a drastic price reduction.
So check it out and be sure to grab some.
And remember, the more you buy, the cheaper it gets.
And I also wanted to show you this Zerg Outdoor
ultralight ring that I just got in the mail.
This is more of a thimble design
that allows the rope to go around the webbing
instead of rings going on
and attaching a leash to the rings.
Now, it's not likely that two metal rings are gonna fail,
but this is a pretty nifty design,
and it's half the weight as my titanium ring setup.
And Adam has the coolest highlining gear
manufacturing video online.
Check out the link in the description below.
Now, keep in mind, nobody pays me to promote their products.
This is gear that I like that I think you're gonna like.
Now, let's get on over to Half Dome,
and what a better place to describe
how to rig Half Dome than on Half Dome.
Welcome to Half Dome.
We're building a natural anchor
with a 60-meter eight-mil rope.
We used the tail of it
and wrapped it around the big diving board here twice,
and I love my figure eights.
And then we took the middle of it
and just wrapped it around the thing
that Mel is sitting on right now.
And then we have this going to a butterfly knot to four cams.
I have a 30-foot piece of eight-mil static
slung around the boulder.
So I have four independent points,
all of which would hold this highline all by itself.
And I'm gonna take this 30-foot piece
and build a four-point sliding X
just like we would with bolts.
So now let's go over each part of that anchor
so you really understand what we wrapped.
So we crawled in the cave underneath the big, big rock
and wrapped the rope around it two times.
On all the sharp corners
or the areas where the rope would move the most,
we padded very well.
And with the middle of the rope,
we went around another huge block.
And with the tail, we tied a super figure eight,
which gave us two bunny ears
to clip to two sets of two cams.
And because we had spare rope
and we wanted a fourth independent point,
we wrapped another boulder that was pretty far back.
And we isolated each section of the rope
with a figure eight, a BFK, or a figure eight on a bite.
They're all the same thing.
It's just how much rope is in your hand.
Then we took those four independent points
and equalized them just like we do with bolts
and backed it up with whoopee slings.
Disclaimer, whoopee slings directly girth hitched
to static ropes goes against industry standard.
The general rule of thumb is rope on rope is bad.
We chose to accept the risks associated with this
in order to back up our connectors.
But again, this is not industry standard
and we do not recommend that you do it.
And because our master point was not over the edge,
our webbing was susceptible to abrasion.
So we wrapped a large spiral around the main line.
And to tension the line, we just used a line grip,
a hangover, and me.
And after all that, we had a bunch of webbing leftover.
So we gently walked it around a boulder
and tied it with a snap bowline.
Now let's show you what Scott Hong and Garrison Roland
came up with on the static side.
All right, so this is the static side
of the half dome line we got.
We wrapped this entire boulder,
this corner of this boulder,
the corner of that boulder over there,
and the whole thing that Mel's sitting on right now.
And it all comes to four independent points
that we do the typical four sliding X width.
But because we had all this extra rope,
because we rigged this second,
we ended up being able to put redundant ropes here
and two independent lines there.
And so everything's pretty much overkilled
and padded pretty well.
So we have our four main main points,
which are the strongest bolts.
And they were all right in this range right here.
They've extended out, all natural rigs,
especially when using ropes, will extend.
And you have to take that into consideration.
We like where it ended up, so it was fine.
I'm happy with the fact that we have this anchor over here.
It helps equalize the fact that our anchor's
too far to this side,
and then puts too much pressure on this rock.
Now this rock is stable,
and it's not gonna pull it off the clip.
It would just pull it that way.
But it puts a lot of force into the ropes
getting jammed in there.
But we had enough padding that it was fine.
And this point helps here.
We technically had five main points to connect to,
but we didn't want to try to equalize five points.
It's much easier with four points.
So we manually equalized two of them
that were next to each other,
and then put our opposing carabiners on those.
So it was treated like one point,
but it's super, super redundant that way.
So we did our four-point sliding X here,
which the master point ended up being around right here.
But after it all fully extended, it ended up here,
which works better that way.
This webbing is less prone to abrasion,
even though we padded it quite well.
We used the opposing button knot soft shackle
on sew-in loop method for our static side.
And we also used whoopee slings here,
so it doesn't shackle at the anchor
if we happen to be wrong with what we were doing here.
It's very, very, very redundant.
So it's super safe.
Now let's talk about the padding dilemma
that often comes with rigging naturally.
Your ropes are touching the rocks everywhere,
but you have a finite amount of padding to use.
So we like to focus our padding on sharp edges,
and anywhere the rope is gonna be oscillating or moving,
which would be closer to the anchor than further away.
So just think strategically
when you're padding a natural highline rig.
And make sure when your friends are highlining
that you're not too loud, or distracting,
or moving around too much,
because that could possibly make them fall.
Ha ha, and he stayed up!
Fucking boss.
And just so you know,
you're not supposed to throw stuff off half dome
because of the climbers below.
In fact, you shouldn't throw anything off cliffs ever.
But those were very soft snowballs,
so please don't troll me.
And remember when you're highlining to leave no trace.
That obviously includes taking out your trash,
but it also includes taking out other trash,
like this glass Corona bottle
that was shattered all over the place when we got there.
We picked it up and hauled it out.
And if you gotta go to the bathroom and can't bury it
in a populated area, you might have to haul it out.
So I'm just doing farts and craps over here.
Just did maybe the most disgusting thing I've ever done.
I taped up Ryan's poop, Garrison's poop, and my poop,
put it in this two liter bottle, taped it up,
we're gonna pack it out.
Fucking gross though, but awesome.
And in case you're wondering how to do that,
you go in here and then cut this and stick it in here.
With enough tape and enough grocery bags,
you can layer that thing up to where you won't smell it.
Now let's talk about logistics.
If there are five people going,
you don't need five hangovers.
In fact, you don't need five jet boils
or even five harnesses.
Now to go even lighter weight,
we could take less static rope next time,
now that we know what to rig with.
But there's a lot of ways to save weight
on things that are just unnecessary.
Another logistics note is that you need a permit
to go up the Half Dome cables.
Now we actually went up about two weeks
before the cables went up,
which means we went through kind of sketchy snow
and had to prosec our way up the cables.
But ideally you go when the cables are up
and you get a permit for it.
And if you get a permit to go up Half Dome,
message me, because I'd love to go again.
Rigging all natural lines requires a lot of compromising,
therefore you shouldn't highline.
Hey, thanks for watching,
but don't be a dummy and go rig your first highline,
especially on Half Dome,
without going with somebody who knows what they're doing.
But until then, check out these other videos
and don't forget to subscribe.