One continuous piece on long highlines is dangerous because if the main were to fail, you would fall a long, long way down before the backup caught you. It's also impractical to buy a km long piece of webbing because you will never want to carry it for any projects that are shorter and traveling with it is difficult because it is over the 50lb bag weight limit when you fly. So after much research, we are presenting you the Slack Inov Split method of connecting 2 highlines together to be the safe, simple, and something we can all do with our webbing regardless if you have a sewing machine and regardless what company you buy your webbing from.
Thank you Cam Peters for filming and rigging with me for over 4 hours for this episode.
And thank you Slacktivity, Fer Kpok, James Hogarth, James Hickok, Ian Cameron, Arthur Lefebvre, Ariel Cicero, Arnaud Capitant, Daan Nieuwenhuis and others who helped create good dialogue about all the options that we have.
Please comment below about your ideas, concerns or stoke about the ideas we shared in this video!
Do you want to know how to connect multiple highlines together to create big, big highlines?
Let's explore all the different ways you can do that on this episode of How Not to Highline.
Hi, I'm Ryan Jinks and welcome to my dining room. We set up this demonstration to discuss
all the different ways people have recently talked about on Slack chat of how to connect backups to
mains and how to connect two mains together to create big, big highlines that are safer
than if they were just one continuous piece. How we set this up is we finally found a good use for
this one cabinet by natural anchoring it. And of course you want to always pad your anchor with a
bottle of vodka. And now I have a reason to explain to my mother why I have this pole in my living room
and we tensioned it with a bungee cord. Now this topic is important because we rigged a 960 foot,
I don't know how many meters that is. What's the meter ratio? This last fall we rigged 290 meter
highline in Yosemite and it was one continuous piece for the main and one continuous piece for
the backup. And I felt pretty uncomfortable the whole time doing that because if the main were
to break you're going to take quite a fall onto the backup. Now let's say you don't break your
back, which we have absolutely no idea whether or not you would. It really depends on what your
backup is. But the other big problem is if you have to rescue somebody. Now you have this big
deep V that you got to slide down to get to the person and pull them back up.
We want to mitigate that especially when the lines get longer and longer because I have some
5 and 7 and 800 meter projects for this year and it's clearly not practical to have one single
continuous piece. Also because I don't want to buy one continuous single piece because that's not
only one expensive single purchase but then I'm never going to use that piece again because I
don't want to carry a kilometer long webbing everywhere I go. So some of the things we're
going to discuss in this video are T loops. I'm not going to say what this is yet so you have to
wait until the end of the video to find out. The Y2K method and the dog bone method and we're going
to go over the pros and cons of each one. Now before we get started let's talk about the criteria
in which we will analyze all of our options. First and foremost we must have a safe and redundant
setup. Our second criteria is modular or standardized. Can everyone just have the same
thing regardless of what brand you have and still make it work? Our third criteria is efficiency.
How hard is it to rig and how much money does it cost to do that one connection? And our last
criteria of course is whether or not the ring can go over whatever you've set up. First we're going
to discuss Slacktivity's Y2K method. This is not Y2K webbing. It's a very specific webbing and a
specific system for it. It's designed for anything longer than 200 meters because it's low stretch
high-tech webbing. What they do is they connect here with a square quick link or in this case
I have an eight millimeter quick link and then a little bit further back they have two loops
facing each other and the backup is also connected independently. This is connected independently so
that's redundant but in order to have the backup connected to the main it is attached with these
loops. Now that is safe and redundant. I like that part. However it doesn't seem to be very modular
or standardized. You have to buy the bundle more or less because you need to have 54 meter long
backups and you need 50 meter long mains. Now what I like about that is I like the idea of having 50
meter sections. Those are small sections that you can just add until you have the length you need
rather than you have a 300 meter piece of webbing but you're only going to do 120 meter high line.
Now from an efficiency standpoint it is pretty easy to set up. This only requires two quick links
however the cost factor is an issue. It is only on the Y2K webbing and that ends up being 400 euros
for the bundle the main and the backup for only 50 meters and that's 450 US dollars. That's quite a
bit. That's about $1.20 per foot or $3.80 per meter and that can get expensive when it's designed for
really long high lines which makes them really expensive high lines. The other thing is if I
wanted to replicate this at home on my webbing I would have to find a place that can sew through
three layers of webbing because this loop requires three layers right here whereas the local guy that
I have at the local parachute jump center can sew through two layers safely and easily but he can't
go through three so I'm very limited being able to do this and the backups are required to be
longer in order for this to work. This setup requires six sewn loops but if you have sewn
loops on the ends of your webbing it requires two additional sewn loops and requires two quick
links or technically you could use soft shackles in these spots. Another downside I'm not too fond
of is having four loops in the same quick link especially a square quick link and lastly can you
get a ring over it? The bomber ring slack enobes a vortex if you jiggle it it can go over just about
every solution we do you basically have to have tape if you were to tape that together the rings
would slide over quite easily. So the next option we're going to look at is slacktivities t-loops
these are depth loops and these are t-loops and a couple benefits of t-loops is you don't have to
tape as often if you just run the webbing through that and then the ring slides over pretty well
the problem is you end up having to have quite a few of these like every 16 liters
these options come on their pink tube and their red tube now it's interesting because their
sewn loop on pink tube is 19 kilonewtons and a seahorse is 23.5 kilonewtons but their t-loops
are less than half of that at 11.5 kilonewtons these aren't that strong so I don't feel like
they're safe like they're safe I just like if we're looking for safe yeah right here you have
the end sewn loops attached to the t-loop and you can use square quick link soft shackle or
a oval quick link however and that works if it's pulled in either direction it'll hold
but it's only 11 kilonewtons and then it has this wiggle room and if the backup wants to move
if you tape this out of the way and your tape could break and it's much much better if this
is taped out of the way the other thing I've heard of people doing I don't quite fully understand
this if they want to back it up more often is they would tie a knot frost knot I think tying
knots and your backup webbing is okay but in the middle in the middle really so let's say you do a
frost knot because I really can't recommend any other knot like an overhand knot if you think 11.5
kilonewtons is bad tie an overhand knot in your webbing and then you attach it to not the death
loop but that's what fits right now that just doesn't seem like the ring is going to go over
that very well and you can take the crap out of it and it it might but it's not that strong
and it's really really bulky I'm not four knots in the middle of a high line on your backup line
a padded frost knot on the anchor that's fine I I can root for that all day long let's talk about
efficient uh t loops do come on the pink tube and red tube from selectivity but they don't come on
anybody else's you can pretty much add it it only does require sewing through two layers but it
requires sewing right here and right here if you do this this is like the worst worst thing for
stitching is to be pulling against the stitching or like your backup if your backup is connected
like this you probably won't die but it's not going to hold anything that's how streamers are
built when you pull against the stitching it absorbs some of your fall but it's intended to
break so never do a t loop like this make sure that the spine of it has stitching on it as well
sometimes you goof up and you might put it in the quick link wrong and one side's facing up
the wrong way now you're walking on top of a bunch of t loops and that's that's not ideal
but if you if you do have a 300 meter piece and you are trying to keep it 300 meters long
and you want to have some way to connect your backup to your main t loops can work they're not
super strong and you can technically have them done at any place that can sew a safe bar tack
so let's discuss selectivity's third option which is sewing backups to the main so when the backup
is sewn to the main line it's very safe and very redundant because the webbings are continuous
pieces and if the stitching were to break worst case scenario the next stitching will catch you
almost act like a shock absorber if it even did break but it's going to be plenty strong at all
these connections however it doesn't feel very standard or modular because you can buy this
with pink tube from selectivity where they have the exact length that's perfect however sometimes
especially with nylon webbing when it gets hot or cold or wet or dry it really changes the elasticity
of the webbing so the main could either bottom out or you have two bigger loops and there's no
adjustability in that plus not everybody's going to have the ability to sew their backup to their
main a lot of people don't have access to sewing machines and they won't know if they're safe enough
people are constantly messaging me about is my sewing loop safe and they send me pictures and
samples to break test and if you're not buying pink tube this requires quite a bit of knowledge
to be able to safely put this together and that doesn't explain on what you would want to do for
big big big high lines unless you bought a big big big piece and sewed it all together at some
point we do need connections and we do need a solution for that as far as efficiency and
rigging goes it cannot get more efficient however the cost it costs quite a bit to sew a loop
now you can get them done from anywhere from two to five dollars to twenty dollars depending on
where you're getting but if you have one of these every 20 meters are you trying to replace the
tapes are you just trying to do it for safety if you have it every 50 meters how much money is that
going to cost you if you have this often so now let's discuss our now capacitance method one that
he shared on slack chat sorry if i said your name wrong um the the secondary loop that comes on
balance communities loops and i believe slacktivity offers those as well are in conjunction
with the backup now what i like about this is that is pretty redundant the backup is connected
directly the main is connected directly and this is pretty dang safe so it is safe and redundant i
like it you can swap this out for a soft shackle or you can switch these two carabiners since
there's four webbings in here which i don't like having four loops in one thing like this but if
it's taped it may not be so bad as far as efficiency and modular this can work because you can buy
these straight from the source you don't have to do any fancy stuff at home this also doesn't require
too much more money because this doesn't cost an enormous amount to have these loops when you buy
your webbing and then uh it only requires two quick links however you can't i can't do this at
home because this requires three layers of sewing right here to add this loop if i don't already
have it on my webbing when i purchase it so i can't just do this in my situation here in loda
california as far as usability goes i don't see too much of a problem with it if you can just
offset that and tape tape this now if this loop was a little bit bigger there we set it
really nicely like that i think a ring would slide over quite nicely on this right there
having the four loops all sharing this quick link can create the problem that's not too bad
are now captain's second method is like this so in loop on the backup is connected to one side
of the secondary loop and same as over here this is a 10 millimeter quick link for reference and
this is eight millimeters right here i don't like this because now it requires three quick links you
have quite a bit going on here to cross these it doesn't sit very well and the other thing
is these backups are not connected so i don't feel like this is super super safe even though
a lot of things have to go wrong for you to die i like to have the backups connected
and the main connected and then have them be interconnected somehow this is very dependent
on these things and these are technically not supposed to be loaded except in emergency
situations so if this broke in here and then it's putting a lot of strain in here
i don't feel like it's super super safe and i don't feel like it's very easy to get a leash
ring over all of that and it costs more money having to have more quick links and here is an
impractical third method that i'm just showing as an example this is safe and bomber this is safe
and bomber and then this kind of makes it redundant uh nothing is not too many
loops in one quick link but clearly this is a problem to uh that's that's four quick links
that's a clusterfuck it's it's awful in in so many ways and then this is most likely to get loaded
first so do you put the main loop the one that's supposed to be on the backup loop and are you
crisscrossing this is it this is what i want in safety and redundancy but this is clearly
not how we're going to get it so now let's discuss fur capokes i'm so sorry if i said
that wrong too from new zealand his uh i like to call this the t-loop on steroids
it's the same idea as the death t-loop but what makes it strong is you have this
additional piece sewn inside in order to make it so it can be pulled this way and it can be
pulled this way because this stitching here is what gets to see the force when it's being pulled
this direction this can be in conjunction with a loop right here if this was the end of the webbing
or this could be in the middle of a line if you're trying to do 100 meter mains and have this at the
50 meter mark this works however as far as modular and everyone can have it standard this is
this is one two three four five six sewings seven eight if you count these and then doesn't even
count the ends of this that's a lot of things to be sewn requires two quick links plus like a quick
link right here if this was the end of the main as far as usability goes taping that off is no
problem a ring would slide over it really well so uh and this can create this is only two layers
two layers two layers so it's not too hard if i wanted to create this myself it's just there's a
lot of work that goes into this so i'm not super fond of this being a standard that everyone has
on their webbing because not everybody has access to a sewing machine to get all fancy and what we
have here is arthur lefebvre sorry if i said that wrong is the dog bone method where it goes up it's
stitched and it comes back down and the thing is this i don't feel is neither safe nor redundant
because the backups are not connected to each other and if it breaks right here in the middle
which it usually breaks the first stitch it could be this first stitch or this one but if it breaks
here basically everything comes apart and you die the other problem is it's three layers of sewing
and no company is going to do this so you have to do this after you buy your webbing and that's not
as modular and standard as i would like it to be now before we move on let's discuss soft shackles
on sewing loops now rope on rope is bad but that's when ropes are rubbing over each other
for example you do tie your leash to your harness and that is technically a rope on rope situation
but because ropes are not moving on each other they're not oscillating they don't rub through
each other but if you have a rope rubbing and running over this so let's say you set the this
up as a repel and your rope ran over it you would burn through this before you finished your repel
and you would die so you just have to understand when rope on rope is bad now a soft shackle is
three times cheaper if you make them yourself three times lighter and three times stronger
than a square quick link an eight millimeter here so i advocate for using soft shackles because i
love them and they're lightweight and they're bomber this will never come off the head
in in a situation where this is constantly tight if you are worried about that and i would in the
middle of a highline i would always tape it so it can never jiggle loose but even if this was a
backup and this was jiggling all the time that i still don't think it would come apart especially
if you tape it there are ways to splice and dice and put ropes and little strings around that to
make this locked or if you do the locking method you go under itself and then over its head and
that is not going to come off like ever especially taped and if you invert it then the knot sits
inside of the circle it creates keeping the knot out of the way in this situation you could put the
knot inside the loop so the rings would slide over nicely this is pretty minimal pretty light
and pretty cheap and pretty strong if you look at my soft shackle here this thing is at least five
years old i've never padded it i've used it on sewing loops the entire time and sometimes on
soft releases don't troll me i'll make another video about that and it just has just almost no
abrasion it just has lost some of its color from the uv light that takes away the dye out of the
dyneema pretty quickly and this method is how i have highlined two or three times now and found
it to be pretty decent for ring usage i felt safe i did tape the crap out of it before i used it but
nothing is really moving on each other and it'll never cut through dyneema has a coefficient of
0.04 that is the same friction level as teflon it's pretty hard to rub teflon and teflon to get
it to rub through each other now that we discussed this as a foundation we can show you the next
methods that i'm pretty excited about so my ideal situation is that we would have 50 meter pieces
for everything and a single sewing loop on the ends i find that to be the cheapest the simplest
pretty much every slackline company offers that or you can actually get that done on your own
you have more options for your loops getting a sewing loop done is not that hard all the
other methods require a lot of stitching so here we have four loops this would be on the ends of
our webbing but the the backup and the main would have to come together we'll talk about how to
extend the backup in just a moment one option i was discussing in a previous video is if i put a
square quick link right here and put all four loops in that square quick link and backed it
up because that's not redundant obviously back it up with a semi-loose soft shackle that's taped
stitch or locked tight and then that button knot would sit inside of the square quick link and they
it's technically redundant i didn't like some of it i don't like everything in one component
this is how i've done it in the past where i've had the backup and the main but they were
independent and this is a very simple solution whether this be quick links or soft shackles
it's just this is connected and this is connected so now let's discuss the different ways you can
interlink these if you wanted to use a quick link you could technically have a quick link in there
and in case something were to blow of course you'd close your quick link it it would yard on this
this would be fine as long as a quick link didn't get cross-loaded or anything technically that
works so if everything's on a high line and this is jiggling and this is tight and this would be
all taped together nicely so um that would sit like this this a ring would pass over that so if
you had a mainline failure let's see here that crosses that way this would hold this could pull
on something weird you might want to put two on there and maybe on this side and one on this side
and then you have redundancy and how they're connected but that's one two three connections
possibly four i'm trying to do simpler now something that's less likely to get cross-loaded
is a another soft shackle and you could hide the button on inside of there and you could
stack and actually stack that pretty well a lot of flexibility in it and everything could
either be lock stitched or taped and yeah i think that would be really fine if there was a failure
this would hold in either direction it seems like i was kind of wanting a little bit more
redundancy and so i'd put a second one in there but then that turns into a huge cluster that takes
four soft shackles you got four button knots to pass that are all fairly close to each other this
becomes quite a mess to have this interconnected so now for my new favorite method florent berthet
from slack you know message me and showed me the slack you know split that he came up with
and i'm pretty excited about it i think i'm going to start using this way so instead of putting the
soft shackle on there like normal you create an x like an eight shape figure eight and instead of
so you you cross it right right there then you go through your sewing loop and put it on like normal
i don't find a locking method is ideal for this but if i put that head inside of the loop
it gets rid of my button knot problem of passing the knot and then you have this eight shape and
then the quick link goes over the x that it creates in the center and then you just have
your two loops in there now this is an eight millimeter quick link there's a lot it's a lot
going on inside of there but it's not likely it's not big enough to be like moving around a lot
so you would just uh tape this just like that that button knot stays there and that's not too
hard to pass a ring over you can use a 10 millimeter quick link which would fit in there
quite a bit easier but you're not going to be adjusting it a lot once it's installed this all
gets taped and you just basically leave it uh the downside to tape is that you can't really inspect
it you can feel around and see if anything shifted but you're basically covering up everything you're
trying to see during an inspection so a variation on the slack you know split is to put a quick link
in there soft shackles on soft shackles rubbing against each other it's not a problem you're
probably going to get more damage having stainless steel rubbing against this things won't be rubbing
they'll be taped or velcro and secured with that button knot you can tuck that button knot right
there and it'll sit quite nicely you can adjust that and tape the crap out of it now as far as
this being pulled these are not sharing any other quick links so you only have two loops in here
if things were to pull put this just this is solid this backup is connected the main is connected
and they're connected to each other i really really like how all of this is interconnected
and then you could tape that pretty easily and tape this so what happens if these are all 50
meter pieces you don't get to have loops in your backup if it's the same length as your main so
that brings us to extenders one webbing extender idea is to have small pieces of webbing with sewn
loops on the ends that you would connect to the backup loop so all this action would be going on
here at the enobe split and then about four meters three meters five meters over whatever you find is
perfect for your webbing combination it would just be connected over over here and that wouldn't be
too hard to pass over or you could soft shackle that and then tape it and it would be pretty
bomber however slack enobes way of doing it is to get a six millimeter spliced eye dyneema extender
and this is simple smooth this is about 7 000 pounds of force sorry i can't think of the
kilonewtons off the top of my head and it's going to be pretty much stronger than any webbing that
you have and you can make these at home at the length you want whereas the webbing extenders
you'd have to get them sewn and you'd have to be getting specific lengths this is pretty
self-explanatory that the eye goes on here but girth hitched on here is a nice option instead of
using a quick link because it's a lot easier to slide over it eliminates one connector that could
fail we will slack snap the shit out of this to make sure it's safe but this is fine in my opinion
right now so let me run through from beginning to end how to do the slack enobe split so i take this
through here i cross over inside of itself kind of like you're going to do a lock um a locked
soft shackle because it's the same concept except we're going to put the sewn loop right here
so you put the through there the soft shackle if you ever work with soft shackles enough you
won't be too concerned that they're going to open put the knot right there and then i'm going to
put that facing down and we're going to put the loop here because let's say the web lock
is that way and so i'll have adjustability with that or i'll have an extender on that side
of the end of this 50 meter you only need to extend one side now you don't want to girth hitch
like this because that can reduce the strength and you can see how that strangles that
what you want to do is you want to put the loop through the eye and then take the tail
and go like that and roll that over and that's going to grab the webbing nicer and not pinch
that dyneema so much this eye is connected here tighten that up that'll get all taped up
check everything this will be on that side and this is done and then you would just tape
the crap out of that i would probably tape here here and then tape what you'd want to do is you'd
want to tape this soft shackle the throat right there tape that throat and then put them where
they go and then tape the whole thing after that and that is only two parts this is something you
can get at home for only a few dollars and make pretty simple make sure you stitch this or do a
brummeled lock slack ino sells these in three and five meters i believe in length in case you want
to buy their method they have soft shackles for this this has a seven inch inside diameter on my
red one here five or six inches would be better this is a four inch diameter soft shackle so the
inside space right here is four inches which is too small to do this so i'd say about six inches
would be the perfect length of your soft shackle and if you want some flexibility in your extensions
what you do is you put it halfway through like this and then connect it to your soft shackle
and so they sell these in three and five meter lengths and that gives you options
in order to fold it in half or do the girth hetched method that i just showed you so there
are many ways many ways to connect multiple lines together for long long high lines but
i have a dream that all slackline companies and slackliners would all get together and get along
and work together to make 50 meter long sections with sewing single sewing loops on the end and we
can all just standardize things and agree on extenders that we can use and you can use either
metal quick link you have to use a soft shackle for the the slack you know split but you can use
metal quick link in there if you want some variety for redundancy however this is amazing
it's light it only takes two soft shackles either way you need an extender without having to have
very specific pieces where you have a 50 55 meter 50 55 meter 50 in order to have the
everything's the same i'm going to cut all my webbing in my garage i'm only going to buy 50
meters from now on with a single loop and if i highline a 60 meter highline yes i will have a
split in it however when i do a 350 meter line i don't have to take a 700 meter long single piece
of webbing i can take exactly what i need for a trip down to 50 meters of what i need and when
we go on big hikes in yosemite and some projects that we've got coming up on traveling traveling's
a lot easier with several 50 meter sections versus a kilometer of webbing another reason i'm
really advocating for smaller pieces is i've heard two times that a team of people carrying a single
long piece of webbing were walking in a hiking train where they're all interconnected so the
webbing comes out of one bag and goes into the next person's bag and they're all doing these
sketchy hikes and what's more dangerous than free soloing free soloing while attached to another
person free soloing so what's nice about smaller sections is you can do this in the field if you
connected let's say 350 meter sections and that goes in one person's bag and 250 meter sections
and that goes in another person's bag makes hiking easier and you just connect this on the spot when
you arrive to your highline you would just connect the top webbing to the bottom webbing of the next
bag connect that in there label which side's top and bottom you get that perfect and then when it
comes out of this bag and runs out the next bag goes out and is perfectly flaked when you show up
so thank you florent berthet and slackinov for sharing this amazing method that i can now feel
comfortable turning all my pieces into 50 meters and we're going to have future videos on us
testing this in the park to see how it feels and what it feels like to connect on site we're going
to do a bunch of break tests on splices on soft shackles and girth hitches versus quick links we're
going to break a ton of quick links so make sure you subscribe like and follow to to see all the
future videos and follow-ups to this and comment below please on pros and cons of this or another
method you may come up with using the same criteria we were using or if i'm missing criteria that
could be important and i will add those in the follow-up videos this could be a five or six video
series as i take my journey through connecting multiple lines with the slackinov split and
thank you cam peters for filming this whole time and doing a lot of the setups for me while i was
checking the edits and because cam and i are just two guys in a kitchen that we took an extra effort
to clean up and rigged a really short slack line on a vodka bottle a wine cabinet and a stripper pole
to show you and demonstrate something that's actually not been tested therefore you shouldn't
highline hey thanks for watching but don't be an idiot and try this anywhere but at home because
you might die go with people who have rigged kilometer long highlines so you can learn in
person from them on how to do this stuff as if that's an option for everyone
but seriously don't try to learn everything off of some youtube channel about how to do this stuff
because it is dangerous please go with people who do know what they're doing the first time you go
out or you can hire me to do classes in person with you those can vary depending if i go to you
you come to me if we just go to crg or if we take some wild helicopter ride and do something
really fun but private message me if you are interested in taking a one-on-one or one-on-five
class if you have a group of friends that want to join on a project until you have a chance to cut
all your webbing into small pieces to try something that hasn't been tested check out
our other videos and don't forget to subscribe like or follow so you can see us actually test this