I'm leaving for Sweden in 36 hours and I thought
Why not just make another quick video?
I'm pretty excited about what i'm doing right here
No, it's not the drop tower, even though i'm pouring the concrete for that tomorrow before I leave
it is
The newest and latest a-frame in highlining. This is a highlining nerding thing
So if you're not into highlining click the like button go to another video you want to see
Uh the problem let me tell you what we're trying to solve here
The problem is when we're trying to send out a really big highline so in sweden
We're going to do a 2.1 kilometer 2.1 ish
and
You you need to hang on to all this
Pressure of this big piece of webbing going out and on our la porten project
We are going to have a winch on the far side so we can rig quickly because we got to rig and de-rig often because of wind
Well, how do we let out the webbing?
We don't have a winch on this side where we can kind of like put a brake system, which ideally that would be nice
We are going to have some a-frames
And i'm thinking how can we utilize these a-frames to create a z-drag because we don't have
On top of this hill a tree here and a tree two meters away and you can just back and forth z-drag
um z-drag is basically so you don't have to use your imagination is this
And by putting a bar here and a bar here
We can get as many z's as we technically want
and the reason I put such a big gap here is because
Uh, we have segments we're trying to pass where every 50 or 60 meters we have sewn loops
With soft shackles or quick links connecting to the next piece of webbing
And then and then the main webbing is not the same tension as the backup webbing
So they're going to be going through differently
So what we want to find out is making sure this doesn't um
Damage the webbing can I get it to go through flat and how much force because I know I can hang on to this backside
uh with
100 pounds of force
uh
And then on the front side, I want to see how much I can get so half a kilonewton on that side
How much can we get so let me show you what uh, our setup is here and then i'm gonna pull we're gonna film it
We're gonna see if i'm gonna throw this episode away because it doesn't work. For example, my original idea did not work because
I basically clipped it to this thing and uh
It has a lot of force on it. The goal is to have about
Eight kilonewtons on this webbing that the winch can in theory produce
And one or two people hold it there. Now if we need to make an adjustment, we just click
Clip this ring here, which is our master point, which our highline will be on anyways
To let's say a rope
With a line grip on it any point we line grip this thing
Let go of the tail and it'll hold the pressure
Of what we have and this will be like on a munter mule or something with a hitch
So we can just release that rope and the pressure is now back on the tail
Talking a lot. Let me just show you what we got that is flaked perfectly and that will be just a big
pile of perfectly flaked webbing
and this secures the
A-frame, which we could use a bolt if we want and if we want to secure the top we can do that with
An anchor on the ground just like we do at the gdb white festival
This tail is going to come through here and then go up
and
uh, basically
It's going to go over under over i'm going to play with how I can keep it flat later
I just want to see how much friction this causes. I'm not even going to hang on to that yet
And we're going to pull this rope
Right here
And then we'll turn on the dynamometer. This is our mobile slack line
uh lab
Setup, we have a nine to one
and then i'll get a
Is that 27 to one as soon as?
I
Put on that ascender that's getting sucked into the system
Is there a line scale two? We get to use a line scale three on the laporton project v prototype
Right now it's holding
Point three kilonewtons. I'm obviously no one's hanging on to the tail
so let's uh
Let's put this on the tripod and see what
Is gonna happen
Eight bars with nobody hanging on to it is one kilonewton and we only need eight. So
I'm gonna go get larry and see if he'll hang on to this tail
And see what happens and if something breaks or rubs that we don't like I don't see a purpose in having
this guy
So we're probably just gonna cut that one off
Same with this. I don't know. This is a good test to see if this is going to rotate
But this can be built into any a-frame. In fact
You get a round bar and make it this bar
Instead of having a bar here. You actually make that part of the system
and if you temporarily have the
Line grip hold the webbing
You can have wing nuts holding it on
Because this isn't that hard to take off
Uh, even with these nuts
And then as long as there's no pressure on it, which is easy to do if you temporarily hold the pressure
So let's go get larry and see how much more we can pull
How strong are you feeling
Okay, will you help hold something
What tell me when you start slipping?
Ah, yeah, but that's a later problem
So this side is going to see
All four and a half kilonewtons that I have right now
This side is going to see
the
Half a kilonewton that larry's holding. So right now
We've got a twisting problem
But so far it's not too much of a problem
The way this ring is set up I would almost want to stabilize
forward
you could but
This side is being pulled more than the other side if this was
Bolted directly and it was independently supported the legs instead of in this u-shape
So I don't think we need more z's because I could get an extra person to help hold this
That you have one too many possibly
We could always better we could always zig it and zag it differently
Okay, so i'm mostly cleaned up. This was just to be a quick episode
There's not a real big conclusion here other than we can incorporate z-drags into things. We already have
We just did a 861 meter highline in yosemite and it's the california record the yosemite record and it's been um,
Really picking up traction and media and stuff. It's really cool. The way we set that across is
With line grip on a pulley system and released the pulleys
Out and before we let go of that one put another one on there
So we had two setups and we had to keep doing that and kept it super flat, but it took
hours and hours and hours
Uh, it worked
But it's not something we can do on a two kilometer that we have to rig and de-rig all the time
So this might end up being something that really works if we fine-tune it
I like the hive mind or collective consciousness put in the comments below how you think we can do this a little bit better
Obviously that was a really crude
bar with a couple sticks on it, so
Yeah, it'd be cool if uh, a-frames all kind of incorporated that somehow
Uh, and they have to be removable in order to get the webbing off or out whatever
Uh drop tower is uh getting concrete poured in the footings tomorrow
and then saturday I take off, uh for
Sweden and i'm gonna post this on monday
I'm trying to make mondays just an update of what we're doing and what's going on
So it's a more of a live feel
than uh, some of the like quality episodes that we put out are sometimes eight weeks old, so
Uh, yeah, let me know what you think don't charge patrons for stuff like this as a quick edit
I'm gonna throw it together and I appreciate you guys watching
Hit the like button. See ya