Drop test - Amsteel as a Highline Backup with climbing extenders

HowNOT2
100 followers
Nov 19, 2016
We dropped a bag with 170lbs of rocks on our amsteel backup line... check it out!!!
All the good stuff is at https://www.howNOTtoHighline.com
Why do people use Amseal as a backup line?
And how do they do it?
Check it out on this episode of How Not to High Line.
Hi, I'm Ryan Jinks and welcome to my garage.
Today we have a pretty cool episode.
Not only are we going to go over the pros and cons of using Amseal as a high line backup
and the safety issues that go along with it, but we also went to Consumidus River Gorge
and dropped a 170 pound haul bag on our Amseal backup to test the forces on the bag and the
anchors.
So why would people use Amseal as a high line backup?
Well, it's because it's super light.
This six millimeter or quarter inch Amseal here is only 24 grams per meter.
Now compare that to spider silk, which is 48 grams per meter.
And if you had a 200 meter rig, this would save you 10 and a half pounds.
Or even if you take moonwalk at 33 grams per meter, that would save you almost six and
a half pounds on your 200 meter rig.
The lightweight benefit of Amseal is not just for hiking a lighter load in, but when you're
walking on a high line, it makes it easier the lighter it is.
So what are the downsides to using Amseal as a high line backup?
If you use loose backups, the Amseal could flip up on top and your foot could step on
this round Amseal and it can be a really shitty feeling when your foot slips out from underneath
you because it rolls off of the high line.
Another real downside for using Amseal as a backup is the safety concerns if you had
to take a backup leash fall on something with almost zero percent stretch.
So we decided to get some friends together and drop a haul bag onto the Amseal with 170
pounds of rocks just to see what would happen.
So we headed out to Consumus River Gorge in Placerville, California and rigged the 240
footer on double spider silk.
After enjoying the fruits of our labor and high lining a bit, we thought it'd be a good
idea to drop a bag full of rocks onto some Amseal.
Bishop thought so too.
So we created a Breville I-splice on a thimble to attach a screamer, a shock absorber, to
Jerry's dynometer.
Then Justin slid the Amseal over and attached it to the static side.
We installed the dynometer and a screamer on our side and also attached our Amseal with
an I-splice and a thimble.
We would attach the haul bag to the leash ring with another dynometer to measure the
force on the bag.
Our leash consisted of a static rope on a Gregory attached to the dynometer so we could
lower it afterwards.
The bag was 5 feet away from the leash ring during the test and we put the excess static
rope in the haul bag for later.
In order to temporarily attach the bag to our high line, we tied a slip knot to some
hangovers.
We got the haul bag as close as we could to the spider silk.
Justin tied into the spider silk, slid out towards the middle, got on top of the line,
and made sure he was not going to get tangled in the Amseal.
Then he released the bag.
It was pretty exciting to get to watch this part.
So now that the fun was done, I set up a rappel in the middle of the spider silk.
I lowered myself to the haul bag and lowered the bag down with the pre-installed Gregory
down to Jerry with the setup we made earlier.
Afterwards I finished rappelling myself all the way down to the ground.
Then I slid across and released the Amseal so Justin could pull it in.
We inspected the screamers from both sides and found they were both fully extended.
The Amseal showed zero signs of abrasion.
Ok, ok, ok, enough of the test.
What were the results?
Did the haul bag get a spinal injury?
So our 170 pound haul bag fell on 6mm or 1 quarter inch Amseal that was 240 feet long
and with about 3 feet of sag.
The dynamometer on the haul bag was 554 pounds of force and the dynamometer on the anchors
was 1024 pounds of force.
Because we used two Yev's screamers, there was less force on the bag and the anchors
than if you took a normal leash fall on that spider silk.
Ok, we need to go over a couple of disclaimers.
First of all, this is not conclusive evidence.
We only did one test and such a unique system, we really shouldn't be risking our life
with it after only one test.
Second of all, the line wasn't taped to the main line.
We have no idea how that would affect the results if those two lines were taped.
Thirdly, the bag was not on top of the slack line, it was below it, so it would have had
further to fall, therefore we have no idea how many more kilonewtons that would have
added and if we would still be in the safe zone.
Another huge concern is that the bag dropped 40 feet.
That would have really sucked if our highline was 39 feet high.
So this system is definitely not something you want to use on a midline.
Another concern people have brought up is how do you rescue somebody in that situation?
We don't have a clue.
I suppose you could lower a rope down to them and try hauling them back to the anchor, but
this test did not have anything realistic on how to retrieve somebody if they were to
fall on their AMSEAL backup.
Using AMSEAL as a highline backup is extremely not recommended.
If you're going to use AMSEAL as a highline backup line, it's extremely important to
have a screamer on both ends of it.
The common use of screamers is in climbing applications where you have to use shoddy
tread gear and you don't want to put a factor two fall on something that's too small to
even print how much it's rated for.
The idea behind a screamer is that it is a sewn loop, wider than this, but for example,
it goes back and forth and is stitched down the middle and then when it's engaged with
a fall, it breaks that stitching, absorbing some of the force of that fall.
So with something like AMSEAL, it's extremely important to have something to absorb some
of that force during a fall if you were to fall on the backup line.
So on my static side, my screamer never comes off.
I have made a brommel eye splice with a proper berry with a thimble for a proper radius bend
into the eye loop of my screamer.
I also have a backup for my screamer.
The way I've configured my backup is to have a length of AMSEAL with two brommel eye splices
longer than the screamer would be if it fully extended, so it doesn't stop the screamer
from doing its job.
To keep it tidy, I coil up the extra AMSEAL and either rubber band it or Velcro it alongside
of the screamer.
And this screamer is for the tension side.
This end goes to my master point and this end is for my AMSEAL.
To put the AMSEAL on the web lock, you put it on just like webbing.
You take a bite of AMSEAL and you put it around the diverter.
Instead of going around once and instead of going around twice, you go around at least
three times.
People recommend you go around four times, but I don't know how they make it fit in the
web lock.
It's very important to have a long tail so you can tie it off back here in case it slips.
Now I would put it in the web lock 4.0 eye, but if you don't have an eye large enough,
you have to put it here.
You cannot put it back here or the screamer won't be able to scream if need be.
Since the AMSEAL has not been thoroughly tested as a backup for a highline and is complicated
to rig with, therefore you shouldn't use it.
Hi, I'm Ryan Jinks and this was another episode of the How Not to Highline series.
This is a guide for slackliners interested in transitioning into highlining.
We are not here to spoon feed the right rigging techniques.
We hope to empower slackliners to critically analyze any system they're going to use.
Risk awareness can keep people alive.
Please don't rig your first highline without an expert.
We have too many wonderful and generous people in our highlining community.
To go rig by yourself after watching a YouTube tutorial, please let's keep this sport safe.
And remember, since no system is perfect, therefore you shouldn't highline.
Thanks for watching and please subscribe.
