Our compact cordless tool organizer is fast to build, looks great, and organizes your cordless tools in a way they are handy and ready to go to work at a moment’s notice.
Organization is a constant effort in the maker space. If space is not well utilized, and tools have a dedicated place to be stored, disorder can set in rather quickly. We still have a lot of things to organize. Still, this little cordless tool storage unit with wall mounted charger array has given a handy and attractive home to our cordless drills, circular saw, batteries, and accessories.
We’ve had the unit for some time, and it’s seen pretty regularly in DirtFarmerJay episodes. It’s been asked about, so it is time to put it in the limelight.
This episode is NOT a step-by-step procedure, along with measurements and such. The build is straightforward, using ½” MDF (medium-density-fiberboard), dadoes, grooves, and rabbets. If those terms are unclear to you, watch this brief episode where we explain what they are, how they are made, and how they are used:
While we COULD take you through building a unit identical to ours, that probably wouldn’t help you very much as there is a wide variety of tool models and manufacturers, as well as how many tools, batteries, accessories, and chargers a particular craftsperson has on hand.
Instead, you can use our plans and methods as a starting point to build a unit that is customized to you.
You can download the dimensioned plans, at these links:
The plans were drawn up by my friend Tom of Tekton Woodworks. Tom is a skilled long-term craftsman and woodworker that specializes in liturgical furniture for sacred settings. His work is, well, astounding! He uses SketchUp® routinely and graciously drew up our tool organizer instead of having us muddle through the process. He then converted them to PowerPoint so as to make them more accessible for all. Thanks, Tom! Beautiful job!
I’ve included a picture of Tom and his bride, Nancy, in the video episode.
While you are at it, visit tektonwoodworks.com to see a sampling of the work that Tom has completed and how widely distributed it is.
Back to the tool organizer. This unit is designed to hold 4 cordless drills, with the bits pointing forward. This allows me to see what is in the chuck and select the one that has the right tool for what I am doing. I like the tool hangs as well, with its center of gravity back a bit. The upper right stows a cordless circular saw. There are aluminum wear strips to keep the organizer in great shape for years to come. The saw will only fit in the bay if the base is closed. The saw can be stored with or without a battery.
There is a small drawer section that holds bits, as well as shelves to hold charged batteries. You’ll need to measure various aH (amp hour) batteries to find the size you need the space between shelves to be.
The unit can be sized up or down, depending on how many tools you have.
We chose to have the chargers directly placed on the wall to the side. You don’t have to reach up on top of the cabinet this way, and you can readily see the charging status on the drills as well. We used the mounting holes on the charging bases to hang the chargers but prevented them from lifting up when the batteries are removed. We did this by mounting a cleat on the wall just above each charger. To make it really nice to look at, we took the time to organize the cords with wall-mounted cord bases and cable ties before plugging the bases into a cord strip.
We took the time to paint the unit so it’s protected and attractive. Just because it works hard doesn’t mean it has to be ugly, right? After building this and putting it to work, we’ll never go back to having a shop without this type of tool organizer on duty.
Let us know your thoughts, and if you have a design or features that you’d like to share with your fellow viewer family members, do so in the comments below!
We hope to have an article and share section on our website soon, so you can upload pictures of your build and system as well.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. You asked for it and now it's here. The plans and
construction details for this cordless tool organizer and charger array. Stay tuned and
I'll show you how to make it. Hey, Dirt Farmer Jay here from DirtFarmerJay.com. I'll tell you,
when we built this organizer and charger base array for this set of tools, it really made a
difference. As you know, organization in a maker space is an ongoing challenge and if you don't
actively fight back with organizational tools like this, boy, the disarray or the entropy will just
take over your space. Well, we put this together here and I generally keep four DeWalt cordless
or battery-powered drills, one which is a chuck type right here. The rest have quick chucks right
here, but this allows me to have a set of tools on the bench that have different bits, whether
it's countersinks, a drill bit, a driver like this for Phillips or a hex or whatever it might be.
So having them all set up and ready to go to work on the bench but also giving them a place to stay
afterwards has been a real addition. The other thing that we did is we put the batteries beside
it and the charging bases without putting them on top for two reasons. Number one, you can see
the status lights clearly. They are pointing towards you whether the battery is fully charged
or it has a temperature overload and therefore needs to wait until the battery cools down or
warms up to get in the right charging range or it can let you know that it's actively charging
through a flashing light. So that's good to know. The second thing is, is when you need a battery
here to pull it off, it comes right up, but the battery charger stays in place by the use of this
cleat right above. These are hung on the wall with two screws right in the mounting holes, but so that
it doesn't lift off those screws, I put a cleat right there which steadies the base and keeps it
right where it needs to be. And then as a finishing touch, if you're going to do this, why not make it
look nice and organized instead of things hanging around? So I use cable mounting bases, put both
the charging power cables as they went up. I ganged them up until they go up out of the top
into the back to their own dedicated charger or plug strip. So we kept these two separate,
but associated with each other. Now what we've done here is we have come up with a set of plans
done in SketchUp that you can download by visiting the link down below. And these plans will take you
not step by step, but they'll show you all the dimension pieces to build this as you see it right
here. And we took time to paint it afterwards. This is constructed of MDF. MDF takes a beautiful finish
and I like the red color. I think it kind of fits nice in our area here, but you know it's kind of
like branding conflict though. Here we've got the bumblebee colors of the yellow and the black for
DeWalt, but this is almost a Milwaukee color. Maybe I'm a little confused, but we just like the way
it looks. You do what you want in your shop. MDF works really well and this is constructed using
standard rabbet, dado, and groove construction. If you're a little confused what those are, check out
the video at the tag above me that will tell you about those three different common woodworking
joints and the difference between them and how they're made. You'll get a lot smarter faster
if you don't already know about that. Now back to this. Before we go any further, it's important that
I give credit where credit is due. Frankly, I'm no good at SketchUp, so a man's got to know his
limitations and find people that are really good. And fortunately my friend Tom at Tekton Woodworks
is a master with SketchUp. Now he is also a master in woodworking. He is a Catholic deacon
that makes beautiful furniture for liturgical settings, whether it's in the U.S. military,
in the Catholic church, and some of the predominant faith in our area as well,
the LDS church. But he makes all that beautiful cabinetry and all sorts of fixtures. I've been
in his shop and my work. The guy is a craftsman, but he's also a magician when it comes to SketchUp.
So he put together this set of plans based directly dimensioned off of this. And you may find them
of good use in two ways. Number one, if you're going to build this exact thing, you've got the
same side of tools and you want to store this and have some battery storage and bit storage and you
want to have this the circular saw all in the same area, you can build exactly this array and take
this idea on the side exactly as you see it. However, it's highly likely you don't have either the
same brand of tools that I have, the same collection or number of tools, or the way you like to array
them. So I'd like to think the set of plans would be useful to you as a launching point where you
can get some ideas and modify it as you see fit. If you only have two drills, maybe you do something
different. If you have six, you do something different. But I think that you'll find this type
of fixture will serve you really well. So go ahead and check out those plans. You can download them
at the link that's down below in the description. And again, thanks to my friend Tom at Tecton
Woodworks. Something else that really bugs people about these kind of tools is the different charging
bases. DeWalt offers several ones that come with their kits. And what's the difference between them?
Why should you have one or another? Check out this video where we tell you the difference in
what each one does at what charging rate. And while you're at it, check out this other video
that YouTube thinks is perfect for you. Check us out at DirtFarmerJ.com. If you like the video,
like it and subscribe. Until the next time, this is Dirt Farmer Jay from DirtFarmerJ.com.