New Highlines in Yosemite - Establishing Elephant Rock

HowNOT2
100 followers
1 Video View·Jun 17, 2020
No road closures, no bird closures, no hiking, no climbing. Welcome to Elephant Rock! 30m & 50m and & 275m
Live life high... safely. All the info is FREE at https://www.slackline.com/
Would you like to know how to find out the history of a highline area?
We're going to show you here at Elephant Rock in Yosemite.
We're super excited to release this new area that has lots of opportunity for everyone
on this episode of How Not to Highline.
Hi, I'm Ryan Jinks and welcome to Yosemite.
The rostrum is closed for the entire spring for peregrine falcon season.
Taft Point is closed because the road is Glacier Point Road.
And the Los Cerros fire in the last few years has also been closed due to the birds.
So, there's not a lot of options for us in Yosemite between March and July.
But we discovered Elephant Rock has so much great potential here.
Now, I wasn't able to find out the history of the line because anybody that might know it
isn't responding.
So, the best way to find out the history of any area that's been highlined on
is just to say that I've established all this.
So, read the most aggressive and violent comments below to find out who actually establishes
because it's most likely them.
But on a serious note, there were bolts here.
They were pretty shitty.
Three-eighths power bolts and rusty.
So, this line may have been established before.
This is 50 meters.
Seems super classic.
This is five minutes from the road.
There's no tourists here.
So, the idea is to get us highliners away from the touristy areas the best way we can
in order to preserve our access.
Because if we're always in the way, they don't like that for some reason.
Even though the tourists can always be in our way.
Anyways, we have a 50 meter here.
A 30 meter we're gonna like natural rig kind of just mock rig up because it's good.
It works.
And then we have a 275 meter that we're gonna set up and maybe rope swing.
Okay, so we're on the static side of the 275-ish meter highline.
We were gonna go up there, but this is gonna be a little bit more level.
This is still about three meters off level.
But at 275 meters, that doesn't matter.
Now, I'm sure you could wrap stuff and try to make this all natural.
But at the same time, we want this to be rigged kind of more often than the other places.
So, we want it to be a little bit more convenient.
And that's how we're deciding whether or not to bolt things.
Is whether or not it's going to be used a lot.
Because it is technically safer to have bolts than to expect everyone to rig all natural.
Because that does require another level of experience.
So, we're going to time-lapse pan drilling.
Because real speed would be awful for you.
See?
So, what we have here is the RockPak.
Now, I'm not going to shit on this.
I'm just not going to say anything good about it.
My hand is bigger than that.
I feel like they skimped on this part.
That could have been bigger.
Now, in order to fit the SDS bit, this part slides out.
And it has the balls just like a drill.
The inside keeper balls.
So many jokes.
The problem is it moves when you hammer.
And then it pinches your skin.
And the other thing I don't like about it is this is Bobby's.
Why?
Because mine broke.
What the hell?
This part broke.
Whatever.
So, the one we like more, we believe, is called the Pika.
It has Allen wrenches that hold in the SDS bit.
But it has a much bigger handle.
And it has a larger striking surface versus that guy.
Probably 30% more.
And a bigger area protecting my hand.
So, we're going to go between the two of these.
Just to get a feel while we hand drill this.
And we're going to experiment between the Yosemite hammer.
Which is probably a 16 ounce hammer.
And a three pound hammer.
To see if the effort to lift it up each time is worth the speed in which it gives us.
Let's just start drilling.
Serious consequences if I miss.
Yeah, like that little plastic thing ain't gonna do you a whole lot of good.
We're putting in the fix glue-ins.
And in this case, the threaded rod stems.
I like them because...
Mostly because I had a lot of them.
BoltProducts.com has a lot of great bolts too.
We were tempted to use some of them.
But a lot of the highlines here in Yosemite already have this kind of bolt.
It has a great bend radius for our ropes.
When we thread our highlining ropes inside of this bolt.
I also like the fact that these were really good in our Bolt Buster tests.
They were always breaking above MBS.
We have not tested them pulling sideways yet.
Trying to twist them.
But if we did try to highline something in a different angle.
The stem is in the middle and not on one side like a p-shaped bolt.
Which could create more leverage if you were to pull sideways instead of inline.
So just...
We had them.
We decided to use these.
And they're half inch fix glue-in bolts.
Talking isn't getting this done.
I'm gonna hammer.
Super good enough.
But now I gotta put the notch in.
What happens when your canister runs out of air?
You want it to be notched just enough so the weld is buried.
But you want to leave a lot up there to have stuff to clip to.
So we'll finish this up.
I'll see you on the other side.
Okay so we spent all day yesterday drilling holes.
We were pretty tired so that's all we basically did.
Today we spent all day rigging.
So I'm about four meters away from the anchor we were just at.
And we had some options on all natural rigging.
There's some trees over here.
You could wrap a rock.
Maybe cams.
But we want this to be simple for everyone to use.
Because this is easy to tag.
And hopefully a nice starter line for people that are visiting the park and new to highlining.
This kind of area was kind of manky.
It had holes randomly.
There were no bolts over here.
But evidence that people have bolted things.
So Bobby took some Liquid Rock 500 which is about this color.
And put it in here in the holes.
And put some dust on it.
And basically they're I think here, here, here, and here.
But like you can't see it if you're not looking.
It really cleaned this area up.
And we minimized how many bolts we put in.
The equilateral triangle.
We have equalization is a myth series on our channel.
Explains why we put this bolt pattern in.
You can also see it on the Bolting Bible.
Which is also now in Portuguese.
And you can learn basically everything there is to know about bolts on the internet.
On the Bolting Bible.
So as we're trying to figure out what's the best thing in this area.
We are trying to go to some rocks over there.
To maybe get like a 90 meter.
Maybe 100.
Because that's kind of fun to be able to do.
Especially if we can just walk the tagline easily around.
However, as you go back into the zigzags.
You're getting into no fall zones.
20, 30 meters out.
And they're super low quality lines.
And I don't think things need to just be rigged just to be rigged.
I think we can just enjoy this one.
Enjoy the big one.
And possibly just the 30 meter.
So there's a lot of things we thought about.
We spent a long time before drilling.
Because drilling's a pain in the ass.
And these are going to be here possibly our whole lives.
So we wanted to be very careful when we made our decisions.
When we established these high lines.
Read the comments below if you want to hear who really established this high line.
I'm sure they've left a comment by now.
Okay, so now I'm tied in.
And I can take the community anchor off.
Which is nice for anybody who wants to step over here.
What's nice about this spot is, as you can see, I can stand here.
We basically reused all the holes that were here.
There were, there was a fourth hole which we filled.
And I have no idea where it is now.
But none of these had hangers.
And they had 20 year old, 20 year bolts.
That were 10 years old.
So they're already rusty.
And they should be replaced anyways.
So this is a nice long-term anchor.
It's nice to tie your BFK right over the edge.
This is padded.
And it's convenient to be here.
So this is a great classic Yosemite line.
Without having to hike too much.
Which is pretty rare around here.
All right, always get a buddy check, pocket check, hat check.
Make sure you like, follow, and subscribe to us on Instagram, Facebook, and YouTube.
Because I post different stuff on each of those platforms all the time.
If you do come to Yosemite, come check this spot out.
We're going to have the topos on hownottohighline.com.
Including the other areas here in Yosemite in detail.
We have videos showing every anchor and what you need in order to rig.
That's kind of what this video is about.
So welcome to the elephant.
And see you later.
I'm going to go highlining.
Two full mans.
On-site no falls.
Sick!
Hey, thanks for watching.
But please don't be an idiot and try to go highlining or climbing.
Or repeat the stunts you see on this channel.
Without going with someone who knows what they're doing.
These sports come at a very high risk.
But can be done safely.
And that's what this channel is devoted to.
Helping you understand what you're looking at.
When you do get the chance to learn from somebody in person.
We have tons of resources.
They're all free.
And they're all at hownottohighline.com.
We have the Bolting Bible which we just finished.
The 2.02 version.
2020 version.
And it's 133 pages.
426 photos.
216 links that work.
It's super thorough if you want to learn bolting.
And we also have Highline University International.
Which is all free courses now.
And Highlining 101 is done.
How to use a highline that's already rigged.
And we are doing the anchors.
And rigging.
And rope jumping.
And space nets.
And more.
Simultaneously with a large group of people.
Now that we've made this open source.
It's going to be just like the Bolting Bible.
It's going to have lots of photos.
Lots of links.
And literally everything on the topic.
We also have a way to get you plugged into the Slackline community.
We have a list of Facebook groups on slackademics.com.
That you can hit control F.
Find your area.
And find the groups that all coordinate.
When and where they're going Slacklining.
So you can get connected with our Slack family.
Another free book we have on hownottohighline.com.
Is the book of Slack.
There is some Slack religious stuff at the beginning.
Because we think that's funny.
But the rest of it is about flow state.
And about the history of Slackline.
It's a thorough deep book.
It's awesome.
Go check that out.
And no.
I don't make money on YouTube.
You need millions of subscribers just to make a living at it.
I do this for a fun hobby.
And because I really want the information.
That I wish I had when I started.
Available for the next generation.
We believe that safe information should not be withheld.
For only those who can afford it.
But it does cost thousands of dollars a year to run this channel.
Bolt Busters cost me like ten thousand dollars.
Slack snapping cheap.
And the websites cost money.
And yada yada.
If you're watching all the episodes.
And if you take the courses.
Please donate twenty dollars.
If you've gone all the way through.
And benefited from it.
And if you read the entire bolting bible.
Learned how to bolt.
And bolted something.
Without having to go through a learning curve.
Wasting money.
Please donate twenty bucks on PayPal.
We literally only survive off of donations for this channel.
I did recently start a specialty instant coffee business.
With my friend.
It's great for camping.
It's great for van life.
It's great for everyday drinking.
It's really great espresso.
We freeze dry it.
All you have to do is add water.
And you can get our coffee at brewjuno.com
And make sure you like us on Facebook.
And follow us on Instagram.
And subscribe to us on YouTube.
Because we are posting stuff all the time.
And don't forget to smash that like button.
Cheers.
