We built 3 different shapes of spacenets and put dynamometers on the legs, perimeter and inside weave to see where all the forces are. You can find the chart of all this data at https://www.hownot2.com/hnth/forces
Thank you Andy Lewis @sketchyandylewis for lending your dynamometers for science.
Thank you Cheyne Mott (@acromott) for filming and TJ Gillick (@sagelysight) and Michael Melner (@meladapted) for building and disassembling these nets with me all afternoon. And thank you @Nateil_evans for joining in for a bit.
Do you want to see the forces on the perimeter
and the paracord of SpaceNet?
Check it out on this episode of How Not to Highline.
Hi, I'm Ryan Jinks, and welcome to the park.
Today, we are going to test three different shapes
of SpaceNets, and we're going to test the force right here,
which is the slack line connecting to it,
which we've already done,
and we know what that is, generally.
But we've also put a dynamometer inside of the perimeter
since we basically don't know what force this sees,
and everyone seems to overbuild these.
And then we're going to put this dynamometer
inside this rope as we weave it.
We're going to put dynamometers on the paracord.
And then the four of us,
Michael Melner, TJ Gillick, and Shane Mote, and myself,
are all going to bounce on this,
and let's see what kind of forces we get.
So the way we're going to rig these SpaceNets
is a bunch of extra pieces of webbing that I have,
but this web lock is awesome for what we're doing today
because it is bomber.
It is from Slack Mountain.
It's the Frog, and it's 60 kilonewton strong,
and it's a solid piece of steel
instead of two pieces of aluminum pushed together
or side plates or whatever.
The whole thing is one thing.
It's got a huge diverter in the middle
and supposedly holds 95% of the strength of the webbing,
which we might slack snap later to find out.
But let's pull this tight and start weaving.
A side note about rigging,
when you have these two loops, a secondary loop,
this is not the loop you clip.
This is for backups and things like that.
That is the main loop.
You can see that's the main loop.
And the way this is stitched, it's still bomber,
but it's made for a backup
or if you want to clip it to something else.
It's not used all the time.
Just, I want you guys to know that
if you ever have a second loop on your webbing.
Balance Community does this.
I don't know which other slackline companies
have the two-loop method,
but I just tape it right there most of the time
when I'm not using it.
This is perfect, guys.
We just built a space net in 10 minutes.
This is pretty cute.
So this perimeter is seven meters long or about 22 feet.
It is, I think, half inch am steel, if I'm not mistaken,
which is plenty strong,
regardless of how much force we put on this.
And it always shrinks.
You get about half of what you think
you're going to get with a net.
So if you actually want a specific size,
double your perimeter in order to get what you need.
Guess how much the perimeter is?
0.35, 0.8, 0.35, 0.12 on the structural rope
and nothing on that.
Even though I just, I soft, I tensioned it as well,
but things stretch.
So with me on this, so 2.5 kilonewtons,
one, one kilonewton and 0.02 kilonewtons.
This is actually has gone up a little.
Oh, 0.2 kilonewtons, 0.3, 0.34, 0.36.
I cannot get this structural part more than 0.36
and if I step on that one directly.
0.1.
Now granted, I am standing on several different pieces
of paracord at once here, but it's only 0.1 kilonewtons.
There we go, Andy.
I treat people's equipment like I would treat my own.
Horribly.
0.2, when I'm standing on something, it's 0.2.
Okay, so there's that.
Okay, who wants to join me?
We have a special guest appearance with Nateel
and what does that say?
0.36 on our skeleton.
What's our perimeter say TJ?
Our perimeter says 1.4.
1.4.
And we are at 3.4.
So the perimeter sees half of what the webbing sees.
1.75.
1.75, 4.3 kilonewtons on our leg.
Put your dynamometers facing up
if you ever do this experiment.
Two kilonewtons.
Two kilonewtons, five kilonewtons.
So less than half.
If we could use the pulley and put the dyno,
embed the dyno on this leg since I do have a spare dyno.
We're gonna reset.
Okay, we just tightened the crap out of this.
We put a dynamometer on that leg and this leg.
Can you read off that dyno Mel?
This one is reading, this dyno's reading 0.93, 0.94.
2.89 at Mel.
2.29.
So the static leg is seeing a little bit more force,
almost three.
And this perimeter is only seeing 0.9.
Yeah, this perimeter's not seeing very much.
So Andy has three quarter inch am steel.
Breaks it like 70,000 pounds of force.
And then attaches old webbing to it to hold it up.
So a lot of people's concerns,
if they've never been on a net
and they just happen to be 400 feet in the air,
that they're just gonna fall through this string
holding them up.
It is a fair concern.
We're only at half a kilonewton
with TJ standing on his newly adjusted dynamometer
on our paracord.
0.38, we can't seem to get the main skeleton structure,
the rope, before you put the paracord.
Can't seem to get that higher than it is.
It's 0.3 right now.
It just doesn't see that much.
It's also very static rope.
So that's two kilonewtons.
It looks like we're at five kilonewtons
over there on that leg.
Five, and why don't we see what that is, Shane?
We have 6.1.
Okay, so we did everything we need to for the triangle.
Now let's do the square.
Now!
That was easy.
Now we have our square net.
Let's look at the farces.
Okay, so we actually did this surprisingly quick,
considering this is pretty good quality.
You just clove hitch around the perimeter,
run it around all of them,
and clove hitch at the end of either the perimeter
or the static rope.
We did put the dynamometer in here again,
and on the rope.
It is kind of hard to embed a dynamometer into the system
because everything's pulling on each other,
and you basically get zero.
So this is a square configuration.
Just from building this,
I felt like it was a lot more stable while building it.
It doesn't want to rotate much at all,
and it gave us quite a bit more surface area, surprisingly.
It's gonna be smaller,
but having a square allows us to have just more area
if you're looking for the best bang
for your perimeter that you have.
We're gonna try a pentagon next,
but let's check out the forces on this square.
Standing tension, we're looking at 0.45 here.
0.39, 0.30.
Might be actually the same as the slack lines.
One kilonewton.
Oh, one kilonewton?
This is 0.6.
This is not much at all.
Read it off with just me on there.
1.8 on this leg.
We have 1.17 here.
Still less, but 1.1.
What do you got, Mel?
2.6.
When you stand in the middle,
man, I can't get this to go up at all.
0.25?
0.2 is about all I'm getting,
and I'm putting all my force directly on this one.
We tensioned this.
We actually put, Mel pulled it super tight against this.
0.2, 0.3, if I push it.
So not very much.
Paracord breaks, whoa, not much paracord there.
Paracord breaks at about two kilonewtons.
So 10 to one safety ratio.
3.6 kilonewtons on this leg.
I estimate five.
We got 4.7 on this side.
But 2.2, 2.2, wow.
So 3.4, 2.2, 4.7.
So the perimeter's not seeing very much.
And then these are still, depends where you stand,
you're not gonna get more than, I don't know.
Woo, we got a 0.5 right here.
Yep, 0.5 I got on that one.
We got up to 0.3 with me and Mel.
Oh, 0.4 with me and Mel standing on it.
All right, all, all in the middle.
Okay, there's four of us.
There's about what, 600 pounds of force?
No, 600 pounds, period.
Of people.
Oh, oh, bottoming out.
Oh, that's kinda fun.
That is fun.
Okay, it's on peak.
Let's check the peak, guys.
5.55 on this leg.
7.5 kilonewtons on that leg.
3.25 on our perimeter.
Did you, did you drop something?
Wanna see me try that?
You have to go through the middle.
Like that kid who gets his head stuck in between the bars.
He makes that look easier than it is.
Let's do a pentagon now.
Oh, the more sides you have,
the bigger your space net feels.
So, triangles feel really small.
Whenever, however big you build them
because the angle is just so narrow for so long
before it builds out into the middle.
But they are a lot easier to rig a three-sided leg.
Putting our clove hitches on,
you put a, in this case, an eight millimeter rope.
That's about 10 meters long.
You zig it around,
and then you just fill it in with paracord.
But I don't necessarily recommend soft shackles for this.
It would take quite a bit for this to rub through.
Soft shackles on soft shackles, it's not a problem.
Nothing's oscillating on each other.
It's very static and it's not gonna rub through.
But right here, things can slide.
Not maybe once it's rigged, but while you're rigging.
So, ideally, while you splice together your perimeter,
you would add two bomber rings of some sort here.
It does add quite a bit of weight to your net.
But a metal connector there,
and then you can soft shackle your
sewing loops or stuff to that.
But that's the only spot I noticed rubs and rubbing.
Not rope on rope.
Rubbing is bad.
So, let's show you some clove hitching.
Now, clove hitch the beginning,
and then you just pull it back and forth.
You don't clove hitch every point.
And then you never wanna go over this
without doing something with it.
So, even if I don't pull it the opposite way,
I'm going to pull it a little bit,
and then go over here.
And then pull tight.
Even do that.
Grab metal, grab that.
Wow, this is quite a bit of surface area.
We might have to do a secondary eight mil rope.
Yeah, I'll pull the tension for you.
Then you clove hitch it in there.
Lock it off.
I usually lock it off one more time.
All right.
Beautiful.
Cool.
And we just do the same thing,
same method with paracord.
So, to clove hitch that,
I just go over itself,
go over that side,
and then I pull it through.
And it looks like a clove hitch.
You can go to animatedknots.com
and see really good demonstrations of that.
So, and then I lock it off maybe once or twice,
just by going over and in itself.
And it's locked off really well.
And then you want to go in whatever natural,
there is no method to this specifically,
unless you're trying to do a pattern.
You just, that makes a 90 degree angle.
And then this one does, kind of.
And then I'll,
I can't cross over this and come to here
without doing that.
Do that.
That.
Otherwise your foot can get stuck.
If I did this instead,
if I came over to here and did that,
your foot could get stuck under this.
That's a bad net.
You want to do that.
And then that.
And that and that.
And that.
And then I come over here.
And since I'm almost at a tail,
I clove hitch it.
I'm only working with pieces
that are about two or three meters long.
And then I lock it off once.
Twice.
And that's pretty much all there is to a net.
And you don't have to have anything more than
an 11 millimeter static rope as the perimeter.
If it makes you feel better,
you could have two.
Because if your perimeter fails,
everything fails.
Like this perimeter right here,
I would not back up.
This perimeter is ridiculously strong.
I would stitch this splice.
I didn't stitch it for the video.
But I would stitch this and just,
I don't want a pentagon shape.
It's too much rigging.
But I would re-rig this as a square
and keep it, I think.
Square felt really solid.
The square felt good.
You got a lot of space.
You get a lot of space with a square.
Pentagons are great.
If you're going to go big,
you go big on a pentagon
because it's already going to be a bitch to rig.
So the pentagon net at GGBY
takes a cove in order for you
to be able to rig something like that.
It takes a lot of anchor points.
Very limited where you can put it.
Like triangles are the most versatile,
but they're not as quality of a net.
A square is like a happy medium between the two
because you can generally,
if you got two parallel cliffs,
you could rig a square.
But these pentagons are a little bit harder.
Okay, we got the pentagon net up.
2.5 kilonewtons on our leg over there.
We've got TJ's 1.3, 1.3, 1.96.
That in the perimeter is more than the stretchy leg.
Feather Pro is not that stretchy,
but it's stretchier than spider silk,
which is our static leg over there.
2.5 on this leg,
one kilonewton on that leg,
and 1.3 kilonewton on the perimeter.
So it's roughly in between what the two legs are seeing,
but it's a pentagon shape.
Triangles saw quite a bit less,
but it's still not like double, double what a leg is.
I don't know what we were all thinking
a perimeter would see
because we were all building up with red span sets
or three quarter inch am steel.
So let's get on and see what happens.
Okay, so these dynos are actually embedded a lot better
than they were previously.
We pulled them pretty tight.
That's, if I stand right there, I can get that to 0.3.
It just sits a lot nicer right there.
You can actually feel it holding stuff.
0.3, that is seeing literally nothing.
0.11 is nothing.
That's 1.6, 1.9, 3.5.
Wow, that leg's seeing double.
That's crazy.
That's because it's static, that's stretchy.
So this bottoms out before that one, I guess.
That's at 5.4 kilonewtons.
This is 2.8 kilonewtons, so about half.
And our perimeter is 2.8 kilonewtons here
with three people.
That has a peak force over there.
So what do we got now?
3.4 kilonewtons.
The leg's at 3.6, and that's probably at seven,
which I'll check in a second.
This is seeing nothing, and that's seeing about nothing.
So 6.3, 3.4, 3.4, wow.
Let's put everything on peak, and then all four bounce.
Sorry, Andy, you're smashing the dinos on the ground.
Okay, I don't think it's gonna get higher force than that.
4.6 kilonewtons.
This leg only saw a peak force of five, however that works.
And 4.4, so this leg and this leg are seeing the same.
I wonder if everything was static,
if this would be seeing less.
But this doesn't see that much more.
So you don't have to use 70,000 pound rope
for your perimeter.
So space nets are safe-ish.
The paracord sees no more than half a kilonewton ever,
or the skeleton part, the eight millimeter static rope
that you put in there.
And the perimeter doesn't see any more force
than pretty much one of your legs does,
and even less when you have a triangle.
You can see all the results from this video on this chart,
which will be on slackademics.com,
and that link will be in the description below.
So triangles are easier to rig,
and they do have less force in the perimeter,
but they get a lot less surface area
than a square or pentagon get.
So it all depends on what you're trying to rig and where.
Think about where you wanna rig it
before you build just a random space net,
have some goals.
So if you want to make it ridiculously bomber,
Ethan Arkin made his,
and that's the one that was over the GGBY pentagon net.
It was 100% am steel.
He spliced it all through,
and you can message him on how he did that
if you wanna make a beautiful, patterned, bomber,
ridiculously strong space net.
And then we have another space net video
if you wanna see how to use a span set
that goes around and then a little Dyneema
to keep everything in line so you can create patterns.
But if you just wanna do random,
clove hitching the crap out of some
11 millimeter static rope,
or in this case, 11 millimeter Dyneema,
will be super good enough.
Even though the numbers on this
are a lot less than we thought,
you can fall off of it.
So please stay clipped in at all times,
and you will feel comfortable on this
and be tempted not to stay clipped in.
Therefore, you shouldn't highline.
Thanks for watching, but don't be an idiot
and try to rig a space net at least up high
on your own without knowing what you're doing.
Please go with someone the first time you go out.
There are too many festivals and people
in our Facebook groups that we made a list of,
and I offer private lessons.
There's no excuse for you to try doing this stuff
on your own if you don't know what you're doing.
Until you have a chance to rig a space net in the park,
or go with somebody who knows what they're doing,
check out our other videos,
and don't forget to subscribe, like, or follow,
depending on whatever platform you are on.
Cheers.