I am making a self-bow!!! This is an old bow I had that I decided to put a fiberglass drywall tape backing on! I put 7 layers of fiberglass tape on the back of this self-bow to test to see if it would hold up! This self-bow is working great so far. OUR NEW WALLETS FOR SALE: https://www.shatterproofarchery.com/shatterproofleather
What's up guys we're back in the workshop today and today we're going to finish up this bow.
But before we get started I want to thank my sponsor, my wife, thanks Callie. Now we can move
on to sharpening this, not sharpening, now we can move on to finishing this bow. Remember I put seven
layers of fiberglass tape on the back of this hoping that this will provide a whole new backing
for this bow. We're going to figure out whether this works or whether it doesn't
So let's get right to this.
So as I'm working this down I'm a little nervous about this dark area right here because this is
the area where it split in the back. That's what this whole experiment is about to see if even
with that split, if thrown on seven layers of this drywall tape will fix it.
So I haven't even touched that right there and if I show you the floor tiller here,
I don't know if you can see that but it's really bending just right in this area and that is
nerve-wracking to me a little bit. But the back seems really solid so far so I'm thinking
this bow is going to be not as powerful as a lot of the other bows but I think it'll still work
and it's just not going to be as powerful because we just don't have enough material there
and so I'm going to try to get a good tiller anyways. I'm going to keep removing wood right
here and I'm going to keep removing wood right above it and below it and hope that that will
work out. This is something that can happen a lot when making bows is you run into problems
but if I continue to try to keep the draw weight I want and keep pulling this back,
the tiller is going to be so far off the chances are it's going to break.
So I'm going to get the tiller correct on this limb that's going to be weaker
and then as soon as that's correct I'm just going to try to match this other limb to that.
So I'm just working on this one limb now and I'm not going to get it perfect right at first but
I'm going to get it good enough to where it's bending pretty consistently and it doesn't look
like there's a hinge point here in the middle and then I can move over to this other limb but
I don't want to move to this other limb until I know the poundage that's going to be on this side.
So I'm going to keep working this upper part right up here right above the hinge
and then I'm going to also keep working down here on the below side.
Something else you want to watch for is on a piece of wood like this with a bunch of knots,
the knots come all the way through the entire bow and if you're using a cutting tool like a
draw knife or something you do run the risk of
gouging out where that knot is and so you want to be careful with that.
It'd be safer to use a rasp or something but if you have a sharp draw knife
and it just cuts right through it most of the time.
If you guys want to see why this is so sharp you're going to have to stick around for the
next video next Wednesday so hit that subscribe button and you'll definitely see
why this is cutting this piece of wood like it's a piece of wax.
So there are two ways to take material off a limb. You can take it off the belly here or you
take it off the sides to make it weaker or to tiller the bow and something I just noticed here's
my finished bow that I currently shoot with. I noticed that this bow is a little thicker
especially up here on the top you can see it's a little thicker a little wider is what I mean
this bow is a little wider especially because I'm trying to make this bow here a lot lighter
of a draw weight. I'm going to take the sides down here and tiller it this way now one thing
you always want to be careful of is that you don't push towards your bow backing. If I go like this
it may pull off the backing but if you're always going away from it you'll be safe so that's what
I'm going to do here to continue tillering on this one because I want this bow to be a light poundage.
Guys that's all the time we have for today but thank you for watching. If you like this sort
of video I put out new videos every Wednesday and Sunday and I've made like 30 videos in the past
continue to make them so you can go watch those or whatever you guys like
and on that note that's going to be it so have a great day.