In the last 10 years, I've sold over a
hundred different SKUs online. I've sold
on Etsy, eBay, Tik Tok, YouTube, Amazon,
personal websites. I've had over a 100
different products, and now I can
confidently say bows are the hardest out
of all of those to profit on. Yes, I've
sold a lot of archery products, but I've
had many other products that are
completely unrelated that I've sold
online with zero audience around those
products. So, it raised the question, if
you were to have a bow making business,
how would you make money doing so? There
are a couple really big red flags of
things that I would recommend you
shouldn't do. There's two ways that are
the easiest to make money making bows.
One is scale. Two is uniqueness with
hard to repeat items. This video is
basically an essay to myself so I can
watch this in a few years when I get
tempted to do ideas that just are not
the best. So, Kramer, what you shouldn't
do is try to make one-off custom bows.
You've done this three or four different
times in your bow making career, and
every time you've done it, it hasn't
turned out well. Here's why. Do not, and
I repeat, do not build custom bows
that's a different design than a form
you already have prepared for it. If you
are going to build a custom bow, you
need to have already have some good idea
of the system on how to build it and how
long it'll take. On your own time,
experiment with new designs and then
when you find one that's really good,
put that in its box. And if someone
wants to swap out one type of wood for
another, you can do that type of custom.
But if somebody says, "Hey, do you offer
a 72-in recurve?" And I say, "I don't."
And they ask, "Can you can you do that?"
Don't say yes. Don't say yes. Even
though you could take the time to build
that form, do that on your own time if
you want to later on. Say, "I'll get
back to you in 3 months and let you know
if I can do that, but don't take that
order and take their money and then have
that burden to do your testing because
what I've learned is you will not make
any money on that bow." Generally,
there's too much testing that needs to
go on and you haven't confirmed that the
design is good. So, if it's their design
and their idea, you may make that bow,
but they may get frustrated at you
because it doesn't perform well. even
though you could have followed exactly
what they asked. Rule number two, you'd
be wise to not take pre-orders in most
cases. The only time I would take
pre-orders is if I've built the same bow
50, 100, 200 times, and I know what
they're ordering at that poundage. I've
got all the measurements and all the
details dialed in and I know I can
produce that on the first one. It
creates a bunch of operational lag if
you take a custom order, but it takes
multiple bows to nail the design they
have. I want want you to take an order
for a bow that takes three tries to get
the finished bow. And now the materials
you spent on these three bows costs more
than you even got paid for that one. Not
too long ago, I actually made this
mistake. I took an order for a bow and I
didn't have a form for it. I had an old
prototype, but I no longer had that
form. But in my mind, I was like, "Oh, I
can produce that again." So, I slapped
together a form. It was the right shape,
but the clamping method I was using took
longer time than needed. On this
specific build, they wanted clear
fiberglass so they could see this
beautiful wood underneath. I've actually
got it. I mean, check out this black
palm. Isn't that awesome? But the
problem was that the glue up took me too
long because I didn't take if I would
have built a proper form, it would have
been what, maybe $2,000 in materials.
And it's about 4 days of time I've got
it down to. So, if it's $2,000 in
materials, four days of time for the
form, making minimum wage, then I'm
2500. So, I'm $2,500 into the project
before I've even priced out their
material or my time building the actual
bow. And what really sucked about this
one is this customer sent me his own
wood and it just ripped me apart that I
wasn't able to deliver. And the reason I
couldn't deliver is because I did a form
that took longer in the glue up. And
with EA40, the pot time is like 40
minutesish. And so the glue started to
harden before I had it completely cured.
And this is his wood. And there's a tiny
tiny little air gaps because I didn't
get enough clamping pressure on soon
enough before the glue started to
harden. So even though I can finish this
bow and it's going to shoot good, it's
there's there's some air bubbles in
there. I can't sell it. So lesson
learned. Don't take pre-orders and don't
take orders for a bow where you have to
build a custom jig or custom form. So,
if you're going to make money bow
making, there's two ways. One is build a
systemized bow system so that you can
offer a competitive price, even rivaling
Chinese bow prices. This is going to
come down to your technology, your
skill, your system building. If you can
dial all those things in to be able to
offer this bow at scale, it can be
profitable. But the systems have to be
dialed and it takes a lot of upfront
cost. The second way you can make money
bow making is to build wooden bows. I
want to go into fiberglass bows, but you
can build wooden bows. These are hard to
massroduce. So you can use your
tillering skills. You can use your
detailed skills to make a really good
wood bow. You can build the bow in about
a day and sell it for $500 to $800.
Next, I would recommend building the bow
first, then selling it instead of taking
the order because what you can do when
you build it first is you can sell it as
it is when it's finished. What I mean by
this is sometimes it's hard to hit the
exact draw weight. So, I might be going
for a 45 lb bow and it ends up being a
43lb bow. Well, if this was a custom
order, I can't sell this to the 45lb
guy. But if I will go ahead and build
this bow, list it for sale, that same
person might purchase it, and once it's
ordered, there's no burden on me to make
it. This allows me to make bows with
more creativity and more passion than
feeling like it's a burden to build the
bow. Hickory self bows are extremely
predictable. I think you could make a
really good hickory self bow and sell it
for $200 to $300. I think you could get
the working time on the bow less than 3
hours and it be dialed in. The cool
thing with hickory is that the
thicknesses are very consistent with
each board. Meaning the wood from one
board to another interacts very similar
to each other. So you could build jigs
and systems to tailor this mostly and
then just do final tweaking. You could
make the bow for $100 of material. You
could spend 5 hours on it and sell it
for $300 and make $200 in those 5 hours.
that's not calculating all the time of
listing it and actually selling it and
things like that, but honestly that
business model is not too bad for bow
making. The other cool thing with the
Hickory is it's extremely durable. So if
you make a bow that's over 66 in, the
breakage rate on this bow is going to be
really low. The other thing is I would
build like a custom Osage like this
Osage bamboo backed and maybe charge
$600 to $800 for it. It's enough. You
can still make a profit on it, but it's
not so much that the refund rate is
going to be really high. What I've
discovered is anything over $1,000, the
refund rate skyrockets. Like, if you're
$950 versus $1,50, it's a ridiculous
difference. And I've been trying to
figure it out, and I think it's
emotional. I think crossing that $1,000
mark is really emotional for people
financially, and they feel that
financial burden a lot more. And if
someone's buying your bow and it's a
financial burden or strain on their
life, it doesn't matter how good the bow
is, eventually they're going to ask for
a refund because dinner is more
important than a bow. Now, if you can
guarantee you find customers that they
can spend $2,000 and it's like buying a
biscuit, it doesn't matter. They don't
it doesn't affect them emotionally at
all. They just want the bow. Yeah,
whatever. Here, just take the money.
Those are the great customers. But in
archery, it's a very very very very
small percentage of people. And a
downside to having an audience is
sometimes I think I found those people
where I've sold $2,000 bows and it was
actually a financial strain on them. And
I wish I would have known that before I
sold it and I ended up getting returns
or refunds because the bow was never
going to fulfill them. It wasn't going
to fulfill them as much as their need to
drive to work. They could have went in
debt to purchase the bow from me. And so
now they have this big financial strain
on their family. And now there are
financial strains emotionally connected
to me. and I'd never want that for them.
So, in those cases, I'm glad they
refunded it cuz I want the best for
them. But on the business model side of
things, you want to avoid selling to
those people. The other way you could
make money bow making that I think would
be really interesting is to do a bow
making class. So, for hickory self bows,
if you know bow making and you've done
it for a while and you're pretty good at
it, you could have maybe three to five
to I want to say any more than yeah,
five to seven people come and you teach
them how to make a bow in person. the
course maybe guarantees that they end
with a successful bow and you get a
bunch of hickory staves. You set it up.
A hickory self bow would be a great
example because you could do that in a
day and you don't need to wait for glue
to dry. The people come, they get to
leave with a bow. They get to
participate in making it and learn from
all the knowledge you have. Charge $500
per person for five people. That's a
$2,500 day. you have the tools and jigs
and stuff set up and you're there
facilitating helping everybody build a
bow. That could be another way you can
make money bow making. So, in the end,
I'd say if your goal is to make money,
bow making is probably not the best
path. But, if you want to maybe fund
your bow making, the hobby of it, you
could definitely sell bows to do that.
Don't take pre-orders. I would, in most
cases, be a soloreneure, make a bow, and
then sell it. If you're going to try to
scale into a business, it's going to
cost a lot of time and a lot of money to
build out the systems to be able to dial
it in. This is from experience. I've
done both. Neither's wrong, and I don't
want to be a victim of a scenario, but
the economics on the bows is is quite
difficult. I made a video on this a
couple years ago. There are currently
some Chinese bows on Amazon that you can
purchase and it's cheaper than if you
were to buy the materials to buy your
own bow. If we want our country to bake
bows, we need to figure out how to
source the materials cheaper. We need to
crush the technology and the system
buildings of it so that it becomes
economical. Otherwise, there's no way to
compete with that. I never did back down
from a good challenge. So, one of the
things I'm doing right now is building
the best jigs, the best bow making
system that I can possibly produce. I am
going to once and for all prove that
it's possible to provide an amazing bow
unheard of for the cheapest price. The
cheapest custom three-piece takedown bow
in America. I'm going to build it. I'm
going to offer it. I'm going to take
care of the economics. I'm going to
figure out how to build this and solve
that problem for you. And worst case
scenario, I get through this and say
it's impossible. It's not profitable.
Best case scenario, we pull it off. We
make an economical way to build an
amazing custom bow that would be the
cheapest one you've ever seen. You'll
buy it. You'll tell your friends about
it. It'll be in Cabelas. It'll be in
Shields. Your local archery store will
hold it and keep it. It'll be
everywhere. The world will see this bow.
I'm on a mission to build this bow. This
right here was my grandpa's bow. My
grandpa passed a couple years ago.
and he's the one who got me into
archery. He taught my dad compound and
he helped me shoot my first traditional
bow. I'm building this bow and this
system in memory of him. I want to make
him
proud. So, the style is designed off of
his bow. This is the bow. He had these
massive mu deer antlers in his in his um
he had a shed and the shed was full of
fletching jigs and arrows and hundreds
of archery trophies he had and this bow
right here he would put up and it would
he'd store it on the antlers of this
massive meal deer he shot
and
man gives me good
feelings. So, grandpa, this one's for
you.