GGBY is getting a new net. It's going to be 1600 square feet and the hole is so big in the middle that we will rig a highline INSIDE of it. It will have almost 5 miles of paracord and over 300 hours of weaving. Watch the learning and building process in this episode with Lorenzo DeMuro, Michael Melner, Jason Man, and Nick McPherson.
All donations go straight back into making this channel better. We put donors names in the ending credits and give them exclusive access to the SlackSnap Raw Data spreadsheet + corresponding footage associated with each break. This all couldn't happen without you!
Would you like to see how we build the GGBY SpaceNets in my living room?
So does Puff. Check it out in this episode of How Not to Highline.
Hi, I'm Ryan Jinks, and welcome to my living room, where I spent days building some bomber
anchors in my walls, which we'll show you how to build indoor slackline anchors some other video.
But the reason I did that is so we could make these 10 foot by 10 foot SpaceNets for GGBY.
Our goal is to make nine of them for 900 square feet of SpaceNets at the wet beaver spot that
it normally is. We're not going to use Andy Lewis's net anymore, but have GGBY have its
own net, and we're going to make it square. Because you actually get more square footage
out of a square shape than any other shape, and size matters at GGBY.
But let us show you how we are working on segmented nets, because obviously we love
segmented things on this channel. I'm super into 50 meter segmented highlines where you
connect them with Enobe splits, so we can carry less, buy less, and be more flexible in what we do
with segmented lines. Well, same thing here. We want to have segmented nets so it's easier to
carry down there, easier to make, and when you can permanently set them up until they're fully made,
makes a huge difference. So let me show you our prototypes and how it doesn't work.
This is the Slack Museum, in case you were wondering, where we have lots of goodies that
we're going to be coming out with soon. So make sure you're on Facebook and Instagram. We're
So let me go over the original perimeter idea. This was six millimeter am steel, which is
plenty strong. It's actually only seen about 70, 60, 70 percent of the force of any space leg,
the webbing that holds up the space net. And so the webbing would break before this does,
if this is the same strength as the webbing in theory. This is about 30 kilonewtons strong,
and basically most webbings are only about that. So this is plenty strong, but we love redundancy.
So I have two layers of six millimeter am steel, the exact same length, but independent. And so
that's why you see two of them here together. The splice that I have right here is on this side
for one, and on the other side, I put the splice there. Not a real reason. You're swinging around
here, Lorenzo. We have the padding that comes on Jerry Meschewski's Balance Community's soft shackles.
This padding is pretty awesome. It would protect from abrasion from the corners, because the
corners are going to see a lot more abrasion, if you want to call it that, potential abrasion,
from what I'm going to use soft shackles here, because, well. So what I thought after building
this, and making my walls bomber, is I wonder if if I build four squares, or nine squares,
if they're going to behave. So come over here, and I'll show you my prototype. So I made four
sections of paracord that were the exact same size, with basically no netting in between. And I wanted
to see if I can keep them square shape once they're up. It didn't work. So let me show you why.
As a continuous piece, when you connect them all together, which I thought this was quite clever
use of a soft shackle, it wants to pull in. This is a separate piece out here, and if I were to unclip
this stuff, it was sucking into the middle to be basically one big star. Super, super frustrating.
So I thought, well, what if I add one perimeter all the way around that is continuous, and that is
what I would take these two things. And if I clip this perimeter, would the perimeter hold this out
in order to be a square? But then it doesn't stay square. It has actually been pretty frustrating.
So then I've been messaging people, and Michael Nichols asked me if I was
trying to use continuous pieces. And then I realized, what if I used end-to-end span sets?
It's actually kind of common for people to use span sets, because they're so bomber. I'm just
obsessed with Amsteel, and that's why I started with that. So pretend that these are span sets.
These would be four 10-foot long span sets for 100 square foot net. And if I did that, my theory is
we'd be able to connect end-to-end. Let's pretend this is two separate things. I would connect that
with a soft shackle, but the energy would go straight through and not want to suck in. So
we're going to build four prototype nets out of just spending a few minutes weaving
these end-to-end sections that give us a perfect square that we don't have to build. I'm thinking
about using purple span sets, because they're plenty strong. And then maybe in the corners,
using soft shackles to connect them, because I've got to get soft shackles somewhere in this system.
I just got to. So Lorenzo's going to help weave four of these things that you see here,
and then we're going to try to rig it here in the living room to see if they stay squares.
Okay, so Lorenzo weaved four of these space nets individually to our anchors here in the house.
And then we put them together and it kind of works. This doesn't suck in. The force transfers
through the line. That's great. What we are finding is if we take these experimental things off,
of course we wouldn't be using carabiners to connect these. But the point is that when this
was rigged and woven, that this wasn't pointing this way, it was pointing out more. And this
had more of an even curve to it, just like this net as a whole right now. And so what's happening
is because this side is in, I don't know, 5%, 10% more, it has this loose part here.
One option we have is to connect, let's say there, there, here, here. And this is just four
squares connected together. We would have nine. I don't know how the center one would act,
but Lorenzo said that maybe a nine foot span set here instead of a 10 foot on the two insides
might help. I'm not sure that you're trying to get too fancy if you're trying to make the shapes
all perfect. Instead, I think we could just take this vagina shape and put a hymen here
and weave it together. And if you did that to all of them, you could actually get your
tension that you need for the net not to feel saggy. So we kind of want to do some tests in
the park to make sure like this goes well. I don't feel like these are that critical for force.
I don't feel like that needs to be redundant, but this perimeter I believe does. So if we do
do this, then we should probably take two span sets per leg on the outside. So it's redundant
or make an Amstel leg backup of some sort. But the purple span sets are plenty strong. I'd
rather have two purple span sets than like a green span set or something. Redundancy is very,
very nice. And then we can do maybe the Eno split to connect them all here with maybe like an eight
millimeter soft shadow, something bigger. So there is a chance that we will still build the nine
space nets here in the living room one at a time. And then when we get to GGBY, we'd lay them all
down like a quilt, connect them in the key spots that we want, rig it, and then spend one day
basically weaving the out of it and connecting all of these vaginas together so that it becomes
one net when we get there. Once it's all together, we can just leave it like that and store it like
that and keep using it for GGBY each year. There's no really reason to store it in nine separate
pieces, but it's sure nice to build a 900 square foot net in my living room. So I guess the next
experiment that we'd want to do is to try to make the inner legs, I don't know, 10% smaller,
like maybe tie a few knots in it or something and do that and see if that actually helps the shape
because we can still, if this was also shortened up, we have a smaller vagina to fill. We were
able to shorten it up about 20%. So if this was a 10 foot leg, we could buy an eight foot span set
for the interleg here and the interleg right here. These would be 10 foot span sets and would
account for the fact that this distance right here is curved in like all nets are. This didn't fix it
100% everything, but it's so much better. If you do that and then that, then you could just weave
the difference. And we will have to do some weaving, I believe on site, but this has already
improved it. What we're going to do now is lay these down, take the figure eights out, have the
10 foot sides, or we might leave the figure eights. This actually doesn't fix this. What we would do
is paracord the two things together all the way across in order to, the carabiners don't actually
quite do it, but let's see here. We're just basically going to put these two slings together
and see if that creates any soft spots. We're trying to get rid of these soft spots here. This
is tight. We'll just keep experimenting until we buy a span set. We have to kind of make four nets
to see if this works. Then we have to theorize what the center net's going to do when we have
a center one. When we do nine, I assume we would do 10 foot legs all the way around because
it's not going to have a weird shape. Let's stitch this together now. These will be,
after we redesign it all, these will be the 12 foot span sets and the inside legs are the 10
foot span sets. We'll have 10, 10, 12, 12, 12, 12. This is actually not going to be four
it's going to be nine. The center square that would go here is also just going to be four 10
foot span sets. This has almost everything is tight with no saggy spots. We ordered the span
sets. I think it was like, I don't know, like 30 or 40 of them. We're going to do the quick, quick,
quick version, maybe five minutes a net. Once we get the sides shrunken into pretty much what they
would be when they're fully rigged, fully woven, then we'll go to the park, rig all nine together
and make sure that this works before we spend the next two months weaving these nets. Stay tuned.
Oh, look what came. Look what we got. It's Christmas every day at my house.
Lots and lots of span sets. So excited. So many span sets.
Here is our perimeter for all of the nine space nets. What I've done since I was waiting for them
is I took my 10 foot span sets that I owned, which come in all different shapes, sizes, and
thicknesses. Yellow is pretty impressively thick. All of our space, and that's going to be this one
ton working load limit because that's super plenty enough. And what I did was I discovered
that I had to tighten this bolt here. Paracord on soft shackles is really, really, really bad.
So I might have to like, uh, commit this one to this corner every time and then, uh, get rid of
this when I'm done, because that's definitely going to compromise it. But when this doesn't
stretch at all, I had to, uh, to get it from that bolt to this one was I basically had to tension
it from this corner and that corner, since it's not one continuous, uh, perimeter anymore. But this
one is pretty normal. Um, they touch right here, but there's going to definitely be this gap every
time, but I just do like a primitive system. Uh, this rope is going to make, uh, eight segments
within the space net. So I did a diamond pattern first, and then I just went, uh, across that way
and then back this way. Uh, this is the only one that I would have to double up. Otherwise I would
just cut the difference, clove hitch it here and just eliminate having to, which I might do, or I
just bunch them together and paracord around it. But, um, if you notice the sides of this one is a
little bit sucked in, you know, that's pretty much straight. So that's probably, uh, two feet sucked
in there, but here you can see that it's only pulled in maybe a foot. There's only about 12
inches between this point and what would be straight. Um, it's okay to have a little curve
in this because when we de-rig all this, we're going to put this next to the other one, which
would be about two feet away, put them together when it's pre-un-tensioned. And then when we'd
rig it in the park, it would add all the tension we need, uh, for our net keeping all this tight.
At least I hope so. If you didn't know, I paint for a living. So this is what I do after work.
How long has this taken us so far? Probably 20, 20, 20 minutes. Now, of course we have a lot more
to fill in. We're just using scrap paracord right now that we have all over the place. Um, I just
have like this big box of paracord. We're going to use that up before we use up our new schools.
The goal is to put four miles of paracord into these nets. So let's watch the master at work here.
We're basically just doing random. We just go around. We don't clove hitch every time. Otherwise
it doesn't automatically tension and you have to just pick your favorite 90 degrees. So it, uh,
so you can go different directions. And then when you get to the end, you want to make sure you stop
at a rope or the span set. And we are using constrictor knots and clove hitches with
tail tile. So you just never pass another rope without looping it. And that way you don't have
any loose strands that could catch your foot or something and trip. This is a problem we're going
to have is how tight we have just made this in the room. You can see here how much curve there is,
which is, you know, typical and to be expected. But, um, to get it back this tight again in order
to continue weaving later after we do our park tests is going to be, I think, kind of tricky.
But, uh, cause you want it to be an existing tension if we're going to continue to weave.
But it's pretty cool. I want to see a really bad example of how not to do this.
I didn't realize how tight this is. This is like really, really tight. And we've got the,
let's see here, the two paracord on that and two paracord directly on a hanger. And my wall is,
uh, going to shit. I might have to change that bolt. It might be, uh, bending on me. It's only
quarter inch. So nobody's getting on this net, not yet, but the goal is to put a, uh, a board
going across this way. So this wall doesn't bow in anymore. And then we can, uh, put people on
the net, which would be super, super fun. Okay. Mel is de-rigging our second net. We have all
this woven on each corner. We have to be careful not to pull this in too far here without pulling
it that direction. Um, cause it needs to be pulled that way. But we, uh, re-rigged the last
one after de-rigging it to see how tight we could get it. And we could get it mostly tight, but you
definitely lose, um, quite a bit. So when we set this back up is when we're going to finish them.
We're not going to set this up and take it down multiple times. It's tight. And then what I have
over here is, let's see if I can one hand this. What we do is we just kind of fold it up. Oh,
gnar. And I leave the soft shackle on there. So that's a five millimeter. The small ones I make
about four inches long, but double wrapped. Um, super bomber. I might change it out to six mil
if it is the main, main corner and probably two of them for redundancy. These are constrictor
hitches that we did that really, really is solid on there. And then everything else is just kind of
wrapped. And I think this will stay in place as long as we handle it well. Are you done on yours?
Yep. Cool. Um, this isn't ideal. I should probably change this hanger to, uh, one of those welded
ones, but we're, you know, we're not bouncing around and doing a lot of stuff on this. So,
um, it's not causing any damage to the soft shackle at this point. I just have to be careful
with it. Let's, uh, let's make our third one. So we have, uh, our first spool that we're diving
into. Now we have it just done. Uh, some rope here makes it nice and easy to, uh, unspool.
And it's nice to have like, how big is sections? Are you taking off 10 feet? Maybe, maybe 15. Um,
everything's pretty snug, but something super interesting we've done now is super good. Uh,
and stricter hitches here, um, is we put the dyno in here to see what it'd go to. And what's
interesting is it was 0.2 when we just tensioned it here. But then after we put the red rope in,
sucked in all the sides, it got up to 1.6. And now you can see that it has settled
back down to 1.2. And, uh, in English that's three and was 400 pounds of force on my walls.
So that's pretty gnarly. They're creaking pretty bad. I would have to reinforce this stuff a lot
if I'm going to, uh, have people on them, but we definitely cannot bring this back up to
over one kilonewton with paracord and a primitive tension system. So we're only
weaving a little bit. And then when we reweave more stuff, after we set them back up, then we
will, um, uh, not take them down until we're done done. Yeah. And then we're wrapping it twice
around these parts here. So when we de-rig it, um, they stays instead of coming, uh,
getting loose cause it's all saggy. So, um, every junctions now got, you know,
more wraps than just a simple wrap. So, uh, we're getting better with each one. Um,
Huh. Huh. I wonder if I know any painters that can fix it. That is really bad.
All right. We wove all the woven we're going to weave at 2.6 kilonewtons.
So there's eight of these triangles, right? And so like that was only five minutes of weaving.
If you spent one hour per triangle, you would have so much paracord in that. So in eight hours,
uh, these nets would be like, each net would be really well done. So yeah, two kilometers,
like 500 pounds of force is that's a lot. That's a lot on this little guy right here.
It's pretty impressive. So, all right. Time to go to the park tomorrow morning and
set them all up connected. We're finally at the park doing our corner weaves. These
pieces right here are 12 foot span sets. And then the two over there are 10 foot span sets and
actually fits quite nicely in between these trees here. And we have our three spools of paracord on
the rope, which is all cute. It's going to be pretty colorful when we're done. Uh, the idea
here is, um, I'll probably put eight millimeter soft shackles here. Um, I just liked the way soft
shackles don't get tri-loaded, but, uh, what we're going to do is have maybe three of these
because we're going to have so in loops, three layers of spider silk holding up this net.
And so we'll have three. So in loops attach this point to have the least amount of bulk
at this point, since we're trying to get on and off the net on the corners naturally.
And then on that side is where we'd have our web blocks. Um, what makes this easy,
if you are setting up a net is if you use a ratchet system, which is super easy to just
get immediate tension and be able to just, uh, unratchet it. So, um, this has been really nice.
You can just go, boop, but yeah, so after we're all done, we're going to lay this out,
um, and see how they all interact with each other. So Mel here helped back up and helped us rig
the space net for the wedding. He was also a pretty crucial part of the team last year for
the space net. So it just makes sense that he's on the space net team again this year. And he's
so nice. He lives in Sacramento 45 minutes from me. So he can come help with, uh, a lot of this
weaving and prototyping designing. So are you, you stoked about this year, man? Yeah. It's going
to be a good one. Yeah. All right. I should get to work. Okay. So I got it all set up here
and I'm learning a few things. Um, but I like the direction it's going. Uh, I don't have the
dyno on right now, but, um, it's actually not very much force to get it up to this height.
I think maybe about two kilonewtons to get it off the ground. Now I have some saggy spots,
but that's because, uh, where the span sets join up next to each other. Um, I didn't connect all
the way. And I think, uh, that will help a lot in the future, but not worth doing right now.
These are our first three colors of paracord that we're using pretty colorful stuff. I don't have
any designs in my head right now that I'm trying to do. I just want it to be pretty colorful and
random. And then at some point we can add a sun in there or maybe weave GGBY into the middle or
something. But, uh, what I've discovered here is here, but it's covered right here is this, uh,
soft charcoal is only about, this is the bigger one that I use for the Enoch splits.
It's too big. You can see here how much play there is in, uh, in these ones right here. And I don't
know how much that affects things. If these were together all the way across, I think it would
tighten everything up. I also don't have everything woven, uh, in a way that stays. Let's see here.
That right there looks a lot better with me just holding it. Um, so if I think I connect this,
then I get a saggy spot right there. So I think a lot of that can be solved on site. I want to
just have a nice foundation amount, uh, weaved before we set this up in the fruit bowl. We're
basically going to take this all down, weave each one independently, and then reset it up here,
problem solve everything we need to. And basically it's ready to take to GGBY. First day is going to
be rigging. And then the next two days is just going to be detailing and tweaking and making
sure it's, uh, tweaking on the little edges. Something I'm pretty excited about is this curve.
These are this at 12 foot. And then the middle one is a 10 foot. And then over there is a 12 foot.
And it brings out this curve really, really well. Same with this side is it's not as curvy because
these trees aren't perfect, but I don't feel like the net is fighting the natural shape that it
wants to be. Um, most of these ropes are tight right here. So that's good. And then when we get
to, let's see here, this is where they all connect. Um, my padding came off. There we go. So right
here at where they all connect is a big soft shackle. And if I start to pull this together,
um, I just have to figure out how I want to do that. I think smaller, soft shackles,
beefier ones and or redundant ones are the answer. As far as the center goes,
um, I feel like this has too much play in it. I might have to do a span sets for,
for this centerpiece and not this am steel, even though it can come out with some pretty cool
designs. Um, it kind of really got sucked in. There's a lot of, uh, stretch in these corners
right here. And so, uh, this wanted to suck in all the way when I pulled with the rope.
So, uh, the center square, uh, act differently than all the other ones have been. And then I
get this saggy section, which I guess I could connect to, uh, these, uh, these two right here.
But if I pull this this way, I can get everything tight once it's up and installed. So,
um, I'm going to disassemble it and make it super good enough.
Lorenzo asked if I was going to put a hole in the middle of one of our first nets here. And I said,
no. And then we started talking about holes in the middle of the net. And we talked about leaving
the center net completely on unweaved, unwoven. And so then we're like, well,
what if we wanted to make a bigger hole? And so I think we just prototyped it with climbing slings
that we would, uh, build three extra nets and have four 10 foot by 10 foots on all directions.
That's only three extra nets for us to weave. And it's 1600 square feet. If we did weave the
whole center and this case, we'd leave the four squares we would need to fill in the middle
empty. And we'd put a 30 foot slack line corner to corner, a rope swing trapeze thing, the lira
silks and a portal ledge and have a circus in the center of a 40 foot by 40 foot space net.
And it's going to be 2100 square. Uh, no 1200 square feet of actually woven space net space.
Um, this thing's going to be absolutely gigantic. Puffs pretty excited.
Lorenzo, what are we going to do to keep the center from collapsing?
I think we're going to put a circle of Amseo right here. So that way we have a solid frame
in the center that we can pull essentially out and get rid of some of this saggy droopiness
that we could experience that we've seen on all of our prototypes. So yeah, circle gives us a
solid for her to pull on instead of just pulling on each net itself. It'll be, you can think of it
as a magnified version of one of these connector points where all the different nets come together
at one point. It would be the idea of having one giant soft shackle in the center where all of
them would become one unit. What shirt are you wearing? Uh, the shirt I got at GGBY last year
because last year was dope and it gets better every year. Oh, nice plug.
We just finished the first net. Yeah. Yeah. And do we have a kitty cat on there?
So I weaved a river in the middle of his meadow. Needed all that green. And uh, this is the first
net that's all done. Um, it's sucked in the sides a lot more than I thought, but I think we can work
with that. You can see how much of a curve that is. This thing is rock solid. This thing feels
like four kilonewtons, but we didn't put the dynamometer on it. You can see, uh, all of our
next nets right here on the ground. But, uh, something we're going to do a little bit different
is, uh, we're going to put a dyno on this. And then after it gets to a certain amount,
we'll just release it, um, a little bit, but you're just doing an infinite amount of three to
one. And that is, um, and that is making it tighter and tighter and tighter. So what's happening
to my wall here is that's coming apart. And then this sheet rock here is starting to pull apart.
Um, cause this, I think is behind the first two by four or in it. And then it's just basically
pulling that two by four off the wall. So, but this thing is rock hard and this thing is super
stiff and that's with nobody on it. So, um, definitely have to wear gloves or climbing tape
in order to not bleed. What's your, well, let me see it again. Right there. Yeah. It'll tear
your fingers up. So, uh, you're ready to make the next net Jason. Hey Jason, you all done?
Yeah. Was this one gnarly? This is a sun with orange flares, nice orange perimeter,
and a blue sky. And it was 2.5 kilonewtons just a moment ago at 2.7 actually. And we just backed
it off with our soft release system so he can get on for the, uh, the net photo as we
we've been taking photos of each person on each net. All right, get on up there. Oh, it's only
1.7. That's very doable. We just have to back off the tension when we're done building it.
Yeah. Oh, that's a really nicely tight, a nice tight weave for sure.
Hey, thanks for watching, but don't be an idiot and try to go highlining or rope swinging or
bolt things just because you saw it on YouTube. If you do want to learn this stuff, we have made
it available on hownottohighline.com. Highline University International has courses now from
A to Z on everything that we do on this channel. The courses don't just include almost a hundred
videos and a large textbook, but it includes a teacher. If it's not me, it's another very
highly qualified individual who will walk you through the program and test you at the end,
because we take it very serious to go from, therefore you shouldn't highline to therefore
you can. So we try to bridge the gap between the techniques for teaching online and teaching in
online. In addition to Highline University International, we have a ton of free resources.
slackademics.com has the bolting Bible, which is a free PDF ebook that dives really, really deep
into how to bolt. And as we were breaking a thousand break tests on bolt busters, we're
going to include them in the bolting Bible and update things as we learn them. So it's like the
best resource that you can get for free about bolting. We also have a list of over 1,300
Facebook groups on slackademics.com. So you can find slackliners near you because the community
is the number one benefit to the highlining scene. So make sure you go and find some slack friends.
And we also have the book of slack, which is also a free book. And that has about 15, 20 pages of
slack religious humor in it. And but covers a bunch of things about flow state, which we get
and the history of slacklining and highlighting, which is fascinating. So check that book out.
And on threadless.com slash slack life, we have more and more t-shirt designs. Our goal is to
have over a hundred designs and you can choose whatever style shirt color and male female size
you want. So a hundred times, a hundred options is 10,000 slack life shirt options for you. So
make sure you go to threadless.com. And I do of course, appreciate those who get involved in this
channel. There's a lot of people who donate $1 per episode on patron.com. And that does help
cover some of the editing costs as we're doing more and more things. I'm able to hire out editors
and some people donate just one-time donations on PayPal, which really helps with our bolt
busting and slack snap because we've got thousands of dollars into that because we're so nerdy about
it. So we really appreciate those who give one-time donations. Another huge help that people
have contributed is their talent. A lot of people like they're data scientists or know a lot of
things about stuff that I don't know that I'm trying to teach because it needs to be taught,
not because I'm an expert. So if you know something or know how to do something or are
soaked to just get involved, please message me because I love having help. We do quite a bit
on this channel and I only am able to do that because I have quite a big team now. And of
course there'd be no point in doing all of this without you, the audience, which we really,
really appreciate. Make sure you follow, like, and subscribe, not just on YouTube, but also on
Instagram and Facebook because throughout the week we're posting little snippets of our break
tests and projects we have coming up, which we're always doing some pretty cool stuff.
And make sure you're on those so you don't miss a thing. Cheers.