Fleximounts is now offering a great product - the Handy Jack Shelving Unit. According to their website, this is the world's first motorized shelving system that moves the shelving into a lower loading position, and then is moved up out of the way for day to day storage. We were able to load the unit with lower density items without having to utilize a ladder - quite convenient!
The Handy Jack fits best in a wall that is 9 foot tall or more, with a balanced loading limit of 165 pounds. The each shelf surface is approximately 2' x 4' and is well constructed.
We found the product to be robust, with a nice fit and finish. It's available in black or white, and comes packaged securely and efficiently for delivery to your home.
There are a couple of small enhancements we believe would be helpful in future productions related to installation instructions, battery specifications for the remote control, and a back stop on the top shelf. These are minor and our rating is that this is a very good product with a fair price. We found it to be a strong addition to our storage approach in our garage and believe you will enjoy the same experience.
We don't receive an incentive for your purchase, nor were we compensated for this review. Fleximounts did provide us a Handy Jack unit at no charge, and encouraged us to give our candid opinion on the product. We trust you found our comments and instructions to be helpful!
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. Recently, we did a product review on the Flexi
Mount's ceiling mounted garage storage system. Well, our friends there sent us another one of
their products, the HandyJack, which allows you to load the system lower and then run it up higher
on the wall afterwards to get things out of the way. We'll show you the unboxing, all the parts
that go into it, the assembly, and then we'll let you know what we think. Stay tuned. The first thing
we need to do is unbox the product. And as you can see, it comes in a regular corrugated box
system. It's probably a two-man or woman lift because it's about 93 pounds. Well, let's go
ahead and unbox it and see what we see. Okay, now here you see everything that's out of the box
laid out in an orderly fashion so you can see what we've got. I won't go into grueling detail,
but to suffice it to say, right here you're going to have both of your support brackets
are bolted to the wall. Here's the hardware set, and it corresponds with everything that's right
here in this section over here. So everything is there. Over here we have the remote control
and the bracket that hangs it on the wall, the power supply cord, the power adapter. And I'm
just showing you the packaging that all those fasteners came in that correspond with the
packing list or diagram or pictogram right here. As you continue over on this side right here,
you're going to see the actual center support that has the motorized unit on it, as well as
the brackets that the shelves will connect to. And you can see a bracket in the top that's going to
affix to one of these brackets on the wall. So here we go. And here you have the shelves themselves.
Now while they look like they are identical, they are not. This one right here is the bottom shelf,
and it sits just as you see it. The one behind it is actually sitting upside down and will be
flipped the other way. And what kind of gives that away is look at the mounting brackets on the back.
One is flared out the bottom, one is flared out the top. So they both have to be oriented like this,
where they're narrow at the top and the mounting holes right here are at the top. As you can see,
we're looking at the bottom of that one. All right. In addition to all of these parts here,
even though it does come with a set of very basic tools right here, a little magnetic level
and a stamped steel socket, you need these tools. And those tools include a drill driver with a set
of nut drivers, some safety glasses, drill bits, a drill to be able to drill pilot holes in the wall,
a level, a nice tape measure that'll work for you, and pencils to mark it. When you've got all this,
you're ready to begin work. Oh, and one other thing, you'll need a small step ladder like this
to reach the work area. Now the first thing we're going to do is find the studs in the wall, and
that's because the mounting brackets need three attachment points to securely mount this system
on the wall. So what we're going to do is I'm actually going to use a little trick that my
friend Lorenzo over at Lone Pine Cabinet taught me using a little swivel mount type of magnet here.
This is a high strength magnet, and what we're going to do is look for fasteners in the wall.
Honestly, I have a confession to make. I went out to look for my stud finder, couldn't find it,
and I remembered his trick, and let's show you how it works. So I know that there's probably a
stud somewhere along here because of the outlet. Let's just see if I can find something here.
Well, there we go. There's a screw or nail right there, so we'll go ahead and mark that,
and I'm going to approximate 16 inches over to the left here. We'll go somewhere in this area,
probably, oh, found another one. There it is right there. All right, so I'm going to mark there,
and I'll go 16 inches or more to the left. Let's just see, somewhere in this area here,
I'm going to say there's got to be something. Oh, I think I just, there it is again right there.
So we're going to mark that. We've now found our studs. Now, each of the shelves on the
HandyJack system is approximately 24 inches deep and about 46 and a half inches wide,
and I want to fairly center this area, perhaps move off an inch off of this molding, but I don't
want to move too far to the right for a couple reasons. One, I have an outlet here I need to
clear a little bit, plus we use this space over here to store banquet tables here, so I don't
want to crowd this over too far, but now that I know my studs, I'll go ahead and mark them,
extend the lines up. The HandyJack needs to be installed somewhere between 90 to 96 inches above
the floor on the top rail. I'm going to raise it a little bit higher because I want to be able to
open this as well and not have it getting into things that give me a little bit of headroom as
well. Even though the shelves will move up, I want a little bit of space right here.
So let's go ahead and put those lines in place, find them. Let's go ahead and go left to right
and find the center mark. If we're going to go 46 and a half, that's 23 and a quarter,
but I want an inch off of there, off of this side over here, so I'm going to go to 24 and a quarter.
There's my center line, which is the main mounting post to be up here, and then we'll go ahead and
side rails. I'll go ahead and put those marks in and then we'll begin installing using a level
and pre-drilling the holes, the main mounting brackets. So the next thing we're going to do
here is we're going to put a level line 96 inches above the finished floor. Flexi-Mouse recommends
either 90 or from 90 to 96 inches, seven and a half to eight foot. I'm going to put a little
higher because I want a little bit more clearance plus my freezer top lid coming up and headroom
and all that. I'm just giving myself a little bit more room. And by the way, they recommend also
that you have at least nine foot of wall simply because the items sitting on the top shelf,
as it moves up, you want some space in there for bulkier items that may not be especially heavy,
like for instance, an empty ice chest or something or bedrolls, something of that ilk
that would go on the top. But we have now placed a mark up at the top. We have a line up here,
which you probably can't see very well, that is 96 inches above the finished floor. We were able
to determine where the items were. Here we go. Here's another one right in this area. Where is
it? Right there. So we knew that there was a stud right here. We double checked. Indeed, it's 16
inches between there. Now, when you go to mount the rails up here, the top rail takes four lads.
You'll see the rail itself has a parallel row of mounting holes. And what you're going to do
is on the stud, you're going to place one screw here, right, just offset a little bit on the stud
itself. So they're both hitting the stud, but they're not in the same line vertically where
it would tend to split the stud. So we have the first one marked right here. And here we'll go
ahead and mount this using the power driver. And then I'll go ahead and do another one right
above it, slightly offset to get a second grip. So there's four total lads on this.
Now, one other thing you need to see very quickly, and that is on this bracket,
notice that there is a detent on the top, and that is the top. If you place it this way,
it will not mount correctly. And then you'll have to take it off and start again on the top mount.
So make sure when you install this, place this to the top. The other thing is to make sure that
you draw down the lag bolts very tight, that there's no slop on the wall, that it's very
tight with no space behind it. That'll give you a secure installation. Let's go ahead and fix this.
Notice that the flange has to be out with the bracket flat against the wall. That ain't going
anywhere. Okay, now we're going to install the bottom bracket. Notice this is what's going to be
going against the wall. This unit, of course, goes away from the wall. So we're looking through the
wall at the back of the unit, essentially. And the first thing we're going to do is place this
right on this bracket. You see it right here. And using the provided bolts and insert nuts right
there to stop them from vibrating off, we're going to go ahead and drop these through like this.
We'll finger tighten them on the other side to begin with. And I like to use my power driver,
but you can use a ratchet if you like. Okay, now the time is to hang this assembled unit
with the bottom bracket to the center rail. And we're going to drape this over that top rail.
You can see there's a specially shaped area here, along with a hole where a screw is going to come
through to absolutely make sure this stays on that bracket no matter what happens. So that's
all going to happen. Let's go ahead and hang it on the rail and then we'll level it. That's all
there is to it. And there's a little bubble indicator right here that's indicating it's
hanging perfectly level. Okay, the next thing we need to do then is put our remaining two lag bolts
down on the bottom support bracket. We've got a good idea of where the lag bolts are because of
where they're placed up there. But let's use our magnet here or stud finder to find where that might
be. And we'll just see, is there a fastener somewhere? There we go. Looks like we're right
at the edge here. So I'm going to say it's going to be right in this area. We'll do a test here.
And then let's come over here and I think it's going to be somewhere in this. Sure enough,
we've got a little bit happening right here. We'll see. All right, let's go ahead and drill
our pilot holes and drive our bottom lags in. All right, let's go ahead and make sure to put
in the top safety bolt to affix the center support post to the top support bracket.
All right, it's solidly mounted to the wall. Let's get the shelves on. Now the next thing is to put
these shelves on there. As I said earlier, these look like they're the same, but they're different.
This is the top one we're going to put on and you can tell it because the brackets are going
up at an angle this way. The wire mesh is on top. And then notice that we're going to put it
on with that angled bracket. This is quite substantial. They've really put some beef
into these shelves. The combined units are going to hold about 165 pounds. So they're making sure
they don't deflect. Now let's go ahead and put it on the center mount. We're going to do that by
raising this, putting it above that tapered matching bracket and lowering it down onto it.
All right, we're going to go ahead and put this tapered bracket right above it and you have to
fiddle with it a little bit. Lift and it'll lock in and it becomes quite substantial. In just a
moment here, we're going to go ahead and put two safety screws in here to stop it from coming up
off of there. Let's step and repeat with the bottom shelves. Same thing. As you can see now,
the wire surface is now facing up. The brackets are on the top half and we're going to do the
same thing again. As I said, these are quite substantial, so you might have to jostle a little
bit and it might be helpful if you have a friend here, but here they go. It locks in place. All
right, let's go ahead and secure these shelves by inserting these safety bolts. Wow, that is
really solid. And there you have it, the Flexi-Mount HandyJack system. So what do we think about it?
What's our take on it? Well, I'll tell you, when we were taking it out of the carpentry,
these are substantial components. And when you lift that center strut, it's really heavy.
Everything on here is pretty beefy, so I have no enhancements suggested that way. The fit and
finish is nice. The spray is nice and even. And this is available in both black and white.
The packaging that it came in protected all the contents, so everything came in
in good shape. There was no structural damage, water damage, bends, or anything like that.
What are some enhancements? Well, there's a couple. Right off, I would say that the instruction
manual is pretty darn good, but it's all pictograms and sometimes it can be a little
imprecise of what you're looking at. And probably my own fault, but the top wall bracket, I had it
reversed on the wall. I had the top up okay, but I actually put it with the bump out instead of flat
against the wall. My fault. But, you know, the pictures were just a little unclear because
they're just drawings, they're not photos. The second thing is, the remote that it came with
is a really handy device. As you can see, that's going to start moving along here, just pushing
the remote. One other thing is, when we went to use the remote, we found that there was no battery
in it. And there is no place in the instruction manual that it tells you what battery type you
need. It is a 2032 battery, and once you install the remote and sync it up, you can either run this
right here, or you can also run it, there's switches right here on the unit down here. So
you have two different ways to run this. Now, as you can see, the lift is going up out of the way.
This gives plenty of head space here, automatically shuts off. One thing I want to tell you to be
careful of, this is 165 pound maximum capacity. But like anything like this, you want to distribute
the weight so you don't have it all on one side. You're not tweaking the shelf. As beefy as it is,
it just will perform better if you distribute the weight equally. Now there's one other little thing
that I want to mention, and I'm going to have you come around the side and take a look here.
If you look at the way that these gussets are done, the bottom shelf automatically limits how
far these items can come back in. The top shelf, the gusseting is underneath, and there is no guard
on the back. So you can push that all the way to the back where it's riding against the wall.
The problem with that is that as the shelf was ascending, it could hit the bracket on the back
there. So you have to actually move things forward just slightly so that it'll clear the bracket as
it goes up. So this is a little thing that I think you're going to need to address a bit.
And you can actually fix it yourself a little bit by putting some kind of backstop there,
or just being careful where you place it. Well, we think this is going to be a handy addition to
our place here. As you can see, our freezer works just fine. This is really clean. And in day-to-day
use, we store tables over in this area. So this is going to be a really nice addition
and keep these moderately weight items up and out of the way. Well, I trust you found this to be
helpful to you. And if you did, won't you like the video? And better yet, won't you subscribe
to our channel? If you subscribe, that helps us to put out more and more videos that are helpful
to you on all sorts of wide range of subjects from the home, garden, and the kitchen. Until
the next time, this is Dirt Farmer Jay from DirtFarmerJay.com.