Highlining - Amsteel 101

HowNOT2
100 followers
Oct 8, 2016
All the amsteel basics you need to know for highlining. This is for entertainment only. Please don't trying highlining without an expert!
What is Amsteel and why are so many highliners incorporating it into their systems?
Check it out on this episode of How Not to Highline.
Hi, I'm Ryan Jinks and welcome to my kitchen. This is our first video of the Amsteel edition
where we're going to dive into all the Amsteel basics you need to know for highlining.
The story starts with Dyneema. About 20 years ago, Dyneema was born in the Netherlands and
or a fancy plastic. The fancy name was SK-60 and Samson Rope made it into, well,
a rope and called it Amsteel. We all know how scientists love to process the crap out of things
so they processed SK-60 and made it into SK-75 which is 30% stronger. They thought of a clever
name to help us confuse the two types by calling the new Amsteel Amsteel Blue, which of course
comes in multiple colors just like the other Amsteel just to confuse us. Then they found a
way to eliminate Cree, the irreversible stretch that rope gets over time. Samson Rope named the
new SK-78 Amsteel Blue Dyneema AS-78. I can only assume AS means Amsteel. So now it seems every
marine company out there makes a SK-75 or SK-78 version of a 12-strand single braid rope. So now
we have more fancy brand names to help confuse us. However, just like Kleenex and tissues are
used interchangeably, so is Amsteel and Dyneema. Here you are looking at blue, Amsteel Blue,
the SK-75 kind. They take the tiny filaments of whatever SK Dyneema they're using and they twist
it into strands. It's 8 strands for the skinny Amsteel ropes and 12 strands for the thicker
ropes. It is basically a replacement for steel cable. I mostly see it online for towing and
marine applications. This fancy rope is 8 times lighter than steel cable and yet stronger than
steel cable of the exact same diameter. It floats on water, which is why it probably has so many
marine applications, and if you pull this stuff real hard it almost stretches 1%. It's extremely
static. If it breaks, it doesn't whiplash like a steel cable, which made for a gruesome opening
scene in Ghost Ship. It doesn't kink, it doesn't rust, obviously. It's extremely flexible and you
don't get any wire splinters from Amsteel. The strength of this Amsteel is amazing. This 6 mil,
8 mil, and 9 millimeter Amsteel can hold 8,600 pounds of force, 13,700 pounds of force, and even
19,600 pounds of force. Fun fact, Dean Potter used to walk on 1 inch Amsteel and that broke
at 109,000 pounds and it cost over $10 for a single foot. Another fun fact,
Samson Rope makes a 6 and 5 eighths diameter Amsteel blue rope that has a 20 inch circumference
and weighs over 10 pounds a foot and holds 4.4 million pounds of force. It is so expensive I
couldn't even find a price online for it. If you highline with that, you'd be broke and probably
be downgraded to walking on a small bridge. Warning, let's talk about how not to use Amsteel.
It has a low melting point, keep friction off of it. It doesn't play well with other chemicals,
keep it clean. And it doesn't like knots because of its slippery surface and the tight bends that
a knot has reduces the strength by over 50% if it holds at all. Amsteel requires splicing,
which keeps 90 to 95% of its strength. Splicing is where you thread the rope through itself since
it's hollow, acting like a Chinese finger trap. You can splice two different ways. Push it through
with the official splicing tool called the SelmaFid, a hollow needle, or pull it through
with a wire with a bend in it. Let's go over some splicing basics. You start by pushing the 12
strands of the Amsteel together so you can slip your SelmaFid inside the center. It's very important
to be inside the center. You have to have six strands on this side and six strands on this side.
Option one is to use the SelmaFid to pull the Amsteel through itself. There's a little hook
right here on the inside, which keeps the Amsteel placed where it's supposed to,
and you can pull it through. And it's got six strands on both sides, creating an eye.
Another option you have is to open up your eye a little bit bigger, get through six strands,
six strands, and you just work it so your eye is pretty large. And then you just take a angled cut
taped piece of Amsteel and you can just push it through. That is by far the simplest way.
Another option is to use your wire with a bend in it. Push your strands through,
you go through the center, and you stick your Amsteel in this thing, and it pinches it and
pulls it through. And you just massage it until the hole is big enough so that slips through,
creating your eye. To bury the tail of Amsteel inside of itself with the SelmaFid,
you push it together and slip the SelmaFid down the center of the Amsteel. Then that little
hook right there, you work the Amsteel inside of the Fid, and then it holds it in place.
And you just twist it, making sure that the Fid goes down the center of the rope.
I grab this side and I just start massaging it, push it down further, grab and massage,
push it down further. And the gentler you are with this, the easier it'll go. And now we have
our eye. And I'm going to slip that out, and I'm going to pull the tail out. That slips right off.
Now I have this eye here. We'll talk about tapering the end off in a minute, but you start
here and you want your eye about that big. You start massaging until you get all of that
ironed out. And that's how you bury with the SelmaFid. Another way to bury the Amsteel inside
of itself with a wire is to go up the Amsteel and pull it through. Now you have to know that
you have to, if you want it this long, that you have to go further back to about here in order
to account for the shrinkage that happens because this gets fatter. So I'm going to go back here,
and I'm going to slip my wire up the Amsteel and grab the tail. Once you get the Amsteel pulled
through, take the wire off, iron out the bend, and put the eye wherever you want and massage
the Amsteel down just like you did before until the tail disappears. If your tail is sticking out,
you need to redo it. Remember, these are just the basics for splicing. There are a lot more details
into building whoopies and soft shackles and continuous loops and all sorts of things that
you can do with this, but this is just the mechanics of getting the rope through itself.
Okay, let's talk about tapering the end. You see how this goes from fat to thin
very suddenly? It's common practice to taper the last couple inches of your berry. One method is
just to cut it at a sharp angle. Be careful not to cut yourself or the Amsteel. Amsteel will dull
your knife quickly. Be aware. That's tapered enough, and then you can pull it through.
The more correct way to taper your Amsteel is to go up the rope a couple inches and to unweave
each strand, and then you progressively cut three at a time. So there's three there. I'm going to
cut all the way up away from myself. The next three, I'm going to go a little bit further up
towards the end, and then the last three, I will cut near the very end.
And now I have a true taper. I will suck that through there, and that right there goes from
fat to thin progressively. Be sure to tape the end of your Amsteel. Do not burn it to melt it
like the end of a nylon rope. It does not burn well. It just melts all odd, and it doesn't
accomplish anything. So be sure to tape any ends you don't want unraveling when you're not using
it. Another common Amsteel practice is to use a thimble inside of an eye. By doing that, it gives
a wide bend radius, which will keep the majority of the Amsteel's strength. Okay guys, that was
Amsteel 101. I'm sure you can see why highlighters like using it. It's strong, it's light, and you
can make it into a variety of goodies. But it does require technical knowledge to use it, and it has
been thoroughly tested in the highlighting applications. Therefore, you shouldn't highlight.
Hi, I'm Ryan Jinks, and this was another episode of the How Not to Highlight series. It's a guide
for slackliners interested in transitioning into highlighting. We are not here to spoon feed the
right rigging techniques. We are here to empower slackers to critically analyze any system that
they're going to use. Risk awareness can keep people alive. Please don't rig your first highlight
without an expert. We have too many wonderful and generous people in our highlighting community
to go rig your first highlight after watching YouTube tutorials. Let's keep this sport safe.
And remember, no system is perfect. Therefore, you shouldn't highlight.
Thanks for watching, and please subscribe.
