DIY Glass Table Lamp [Simple Tutorial]

Welcome to the Woods (Melissa Woods)
160 followers
11 Video Views·Dec 15, 2022
Comments are disabled for this video.
I'm going to be drilling into these large glass jars from Anchor Hocking
using a diamond-crusted drill bit to make my own lamps.
I get started using Play-Doh, of all things,
to form a small circle that will hold water around the drill area.
You'll see when I drill I put water into the little Play-Doh dish
and then I start at an angle with my drill bit.
This is to just make a mark in the glass
and I continuously switch out the water because you want to keep the drill bit cool.
So I gradually move my drill bit upward starting at an angle and moving it to straight
and then as I go I kind of move my drill bit in small circles to really get down into the glass.
Drilling through glass is definitely a slow-going process
so just take your time. Be sure to learn all about it before you start.
You can see that I finally break through here
and then it's time to just clean up with a towel that Play-Doh and water residue.
Now I'm going to be modifying the aluminum cap that screws onto the top of the jar.
I start by drilling a small hole. I can use a wire nippers to cut through that aluminum
and kind of get a large enough opening for my lamp hardware.
That was also kind of a process. Be careful not to cut yourself on the metal.
So then I'm using E6000 glue to put my little ring that's gonna allow me to screw in my lamp.
I let that dry overnight.
Then I'm running my cord through the hole that I drilled in the glass
and I'm putting together my my lamp hardware now.
This is actually a hanging lamp that I got from Ikea
and I converted it into use for this lamp using a tutorial that I found on YouTube.
This lamp hardware is called the HEMA, H-E-M-M-A,
and I can link to the YouTube tutorial for how to take that apart in the description.
But right now you can see me just putting it back together.
Be sure all your cords are connected to the right places
and do not attempt electrical work unless you are confident you know what you're doing.
And then this piece is going to screw into the aluminum cap
and we'll be able to screw the whole thing onto the jar.
Time for the light bulb.
And now I'm using one of those like clamps.
You can attach your lampshade onto the light bulb.
I could also use a unifit lampshade but I wanted the lampshade to sit a little higher.
That's why I bought one of these.
So we're just screwing down that finial and we are ready to go.
I think this looks really cute but I am going to fill it up with something for seasonal decor.
I'm going to put these painted white pine cones in there for winter
and I love this design because you can switch out your decorations seasonally.
I also want to show you what I did with some faux flowers.
These ones match the colors in my living room with the teal
and I just filled them up in the glass vase and it looks really cute.
If you enjoyed this tutorial go ahead and hit that share button
if you're on Facebook or subscribe if you are on YouTube.
