Best Drawer Building HACK You Need to Know

Welcome to the Woods (Melissa Woods)
160 followers
My method to build a drawer might be unusual, but I hope you find some tips that help you install drawers! Thanks to our sponsor Dreame, shop their super swanky X40 Ultra robot vacuum & mop and get a 5% discount with code wthwX40U here: https://www.amazon.com/dp/B0CXDXKSXP?maas=maas_adg_3860ED077037BF8A87FF7C20809B72AD_afap_abs&ref_=aa_maas&tag=maas
@DreameTech #builddrawers #drawers #drawerslide #dreame #dreametech #dreameX40ultra
Follow me on Instagram: https://www.instagram.com/welcometothewoodsblog/
Follow me on TikTok: https://www.tiktok.com/@welcome2thewoods
Support me on Patreon: https://www.patreon.com/wttw
Hey everybody I'm Melissa from Welcome to the Woods. Today you're joining me in my garage because
I have this custom drawer project and I wanted to show you the simple method that I use in order to
install drawers and build drawers. I find that my method prevents the drawer from binding. It allows
it to slide in and out the smoothest and it also is a little unorthodox. You maybe have never seen
it before. We're not going to be building the drawer box and then mounting it onto the slides.
We're going to be mounting the slides as the very first step before completing our box. Here are my
slides. Can you believe these things? They're 36 inches long. What am I building? So before you
mount your slide you want to think about your face frame. I'm not going to have a face frame
on the cabinet I'm building but if you are you want to offset the slide so that you're for sure
going to clear whatever the width of your face frame is. A lot of people build up plywood back
here. Since I'm mounting directly to the box all I need to do is just before I mount it just lift
it up slightly so we have some clearance for my drawer box at the bottom. I'm going to use a scrap
piece of wood for this and I want to make sure I pick something that is thicker than like where I
want my drawer box to go. So this is about three quarter inches tall. That's the height I'm going
to use to mount my slide like that. I have a sheet of half inch plywood that I'll use to lift up my
box so I'll have a half an inch clearance then. It's offset from the front an eighth of an inch
because I'm going to have like drawers that come up flush. If you're going to do an inset drawer
you want there to be space for your drawer front so you have to move this back even further. You
just have to pay attention to that before you mount your slide. Now as long as you're working
on a level surface this is going to be level so I don't really have to grab my level out I can just
mount this right away. Okay let's squeeze in here. Okay so now it's mounted there we're going to pull
out our support then we're going to put in our support that is thinner just like that and we're
actually going to mount one of the drawer box sides to this. That's the next thing to do. I actually
made this too long I'm seeing. I'm going to shave it because you don't really want it to be
more than an inch longer than your slide just so that the drawer works well and I cut this at 39
inches and this is 36 inches so I'm going to cut two inches off of this. Now that I got that cut
off and I'm all full of sawdust I'm going to put my drawer side in against the slide and we're going
to line it up with the edge of the slide so we have that eighth of an inch gap that pulls the
drawer shut. Okay and then we're going to just hold on to the slide and we're going to pull it out
onto our supports. You can see I chose a support that is the same thickness as my box and then a
half inch support that is the same as the one I'm doing here just for some clearance. Now that I
think about it I think I want less clearance. I think I want like an eighth of an inch board
so let me get something else. Let's do something thin like this some paneling that's going to give
me enough clearance but it's also going to have me not waste space. Hold it down against this
you don't want it to tip back you know and you're going to line it up with the drawer slide fully
closed then you're going to pull this out like that and we can go on the other side and mount
that. Okay we're going to pull out our support. Alrighty let's mount the other side so I'm going
to put my thick support in. Okay now we take out this thick support and put down the eighth inch
paneling and now we're ready to mount the side of our drawer. So the biggest benefit to doing a
drawer in this order the hardware is already on your box when you're done building your drawer.
It's already perfectly placed and you're not dealing with this bulky drawer trying to
mount the slide. I regularly get asked the question how do you get so much
done and while I am a pretty productive human I can't deny that I have help. This little guy
has been revolutionary for staying on top of housework thanks to Dreamy for sending it to me
and for sponsoring this video. It is not your typical robot vacuum it also mops empties and
cleans itself. I am constantly surprised by all the stuff that this little guy finds in the nooks and
crannies in my home and I sure appreciate how clean my floors are afterwards. It's powerful
and impressive vormax suction reaches up to 12,000 PA so it won't get clogged even with hair like
mine laying around and it's side reach technology on this vacuum extends the brush out to reach into
indented areas and corners like the toe kick of your cabinets. When it's in the mopping function
there's a similar mop extend robo swing technology that allows the machine to clean baseboards edge
to edge mop into corners and even maneuver around furniture legs. This boundless reach gets into
areas of my home that I could never clean with traditional methods. It's hands-free set it and
forget it cleaning that frees up so much of my time. When it comes to maintenance I'm pleased
to say that this machine cleans itself the x40 ultra complete cleans the mop pads after every
single session of mopping with 158 degree fahrenheit hot water removing tough dirt and grime
from the pads so they're ready to be used again. Then it even dries the pads so that they don't
grow mold or develop odors. This robot vacuum is intelligent enough to identify and adjust the
brushes for carpeted areas preventing cross-contamination between wet and dry messes
as well as preventing you from having to go manually move the vacuum when it's stuck on rugs
or carpet. When it's time to empty debris that the vacuum sucked up the x40 ultra empties itself
into a large 3.2 liter dust bag at the hands-free base station. It docks itself and recharges all at
base station on its own so if you set it on a cleaning schedule you only need to check on this
machine it's working properly and empty the dustbin every like month or two. Seriously incredible.
It's time you upgraded to the intelligent and adaptive cleaning of the x40 ultra complete
mop system and robot vacuum. How I feel about owning one lives up to the name dreamy. Shop
for yours by clicking the link in my description now. Now we get to take this measurement between
these two to cut the other pieces of our box and this is going to be exact down to the 16th of an
inch and sometimes it can be slightly different in the back if your box this framing box isn't
perfectly square. So now I know that my box the piece I need to cut to complete my drawer box
is exactly 19 7 16ths and back here is same 19 7 16ths that's the exact same reading. So then
I'm going to put my support back here and I'm going to add this front piece and the back piece.
I connect my drawers typically with kreg screws like this and I'm using up scrap wood so that's
why it's not the same height it doesn't really matter this is going to be all covered by my
front face of my drawer. So we're going to screw this together then we get to just remove the whole
thing and build the drawer. I spilled all over myself at lunch and I needed to do an outfit
change. Okay so now we're going to build the drawer so I have like these grooves that I cut
on my table saw and we're going to add some wood glue in them. We're hopefully going to slide this
drawer in and make it really really strong. When my daughter shoves her clothes down in these drawers
they should be able to handle that without the bottom busting loose. And then my bottom piece
I cut for my drawer slides into the grooves oh yeah look how nice that is.
So for my box I also I mean it's all put together now and it's like
it's really sturdy it's awesome but I also have these slots for a divider that I cut.
All right now moment of truth is my drawer box gonna
go in there nice and work nice even though I mounted my slides before I even built this thing.
Let's line it up and see. I'm gonna line up that side there.
All right now to build up from here we're going to add in a support. I have one cut to this
exact size of the inside of this okay and we're going to just build off of this.
I will just add another spacer and mount my next slide.
Let me know in a comment below if you've seen this method before to build drawers or if this
is new to you then I'd love for you to give my method a try. Thanks so much for watching
welcome to the woods we'll catch you again next time.
