528. Making a Porcelain Roller Texture Basket with Hsin-Chuen Lin 林新春 滾花紋陶瓷籃製作示範

Soul of Siberia
114 followers
5 Video Views·Dec 14, 2022
To see or buy my finished work and pottery tools, please visit my ETSY shop:
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/Hsintools
http://www.etsy.com/shop/potterysquare
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more about my back ground, please visit my Website:
www.mypots.net
Follow me on Instagram: hsinchuenlin
Like me on Facebook page: Hsin-Chuen Lin Ceramics
All right, after using the MKM roller, I'm going to put more texture on the surface.
I'm going to use the chopsticks.
So I'm making handle for the basket. Roll the coil and make sure it is rolling evenly.
Okay and then make it flat.
And also before I trim, when the rim is still kind of workable, I kind of alter a little bit.
All right, so I will let it sit aside and then let it dry a little bit further
and then attach it. Now I'm ready to trim this basket.
So for trimming, it's very straightforward. I don't need a foot rim, just make it flat.
I'm putting some water to rehydrate it because the rim is a little bit dry.
If you want to attach the handle, make sure the handle and the body is the same dryness.
Right, so I will let it sit for a while and then come back and reattach it.
Because now the handle I just rolled it, so it's soft and the body is kind of dry.
So I want to put it on so that the body draws some water from the handle.
And then I will add slip and then attach it and then finish it a bit better.
But for now, I will just let it sit for a while, maybe 30 minutes, 20-30 minutes.
I will cover it, okay, just so that when I come back, I can finish it up.
All right, I'm ready to attach it after 30 minutes.
This part is kind of dry, so I will let it uncover. This part will dry a little bit more
and then I will smooth it out, maybe patch a little bit with some clay coil
so that it will be stronger. But for now, I just leave it alone.
All right, so after a short lunch break, I'm taking my time to let it dry further.
And now I'm ready to return and then reinforce the joint.
Because the joint is usually the weakest part, so I'm gonna do a very good job on the joint.
I'm just brushing some water and then roll a very tiny coil to put it in the cap.
adapt the same method and then create your own. All right, thanks for watching and see you next time.
