Where do we keep getting ideas to pass on to you? By being life long learners, just like you! We take advantage of great resources like industry journals and skills magazines, as well as live maker and trades events.
WoodSmith® magazine is one of DirtFarmer Jay’s resources and has been since 1980! Many of the skills and techniques he uses have had their genesis in the pages of WoodSmith®!
It’s even better when you get to meet the founder (Don Peschke) of the magazine, or the authors and on-screen personalities at WoodSmith® in person! DirtFarmer Jay and Maggie attended the Woodsmith Workshop in the Fall of 2019 and met the editorial, production and shop team. It was a superb experience!
Well-known YouTube personalities were special presenters as well, including George Vondriska of Woodworker’s Guild of America (WGOA), Matt Cremona (mattcremona.com), James Hamilton (StumpyNubs.com) and Anne Briggs (anneofalltrades.com). Each offered EXCELLENT workshops, some of which will be featured in future episodes right here on DirtFarmerJay!
I highly recommend WoodSmith® magazine as it has interesting projects as well as techniques in each and every issue. There’s lots of good photos and illustrations, and information is presented in a clear and intuitive manner. Check them out at www.woodsmith.com!
We are not compensated in any form for this recommendation or feature. It’s our pleasure to pass on great resources to our viewer family.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. You know, I'd love to tell you that all the tips
and techniques that we give you on our channel, they come right out of our own heads, but that's
not the truth. Like you, Dirt Farmer Maggie and I are lifelong learners and we're constantly
searching through new sources or going to their experts to get great tips and techniques that we
pass on to you. In this episode, I'm going to share with you one of my most favorite
resources, Woodsmith Magazine. Stay tuned. Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
One of my favorite go-to resources for many years has been the Woodsmith Magazine. Now,
to give you an idea how long I've been familiar with this resource, I subscribed in 1980. It
started publishing in 1979. And in fact, I've had the pleasure of collecting all of the editions
all the way up to this current edition many years later. Now, what makes this such a valuable
resource? Well, not only are there reader tips and techniques that are shared ongoing,
but there's great projects that build your skill set in the woodshop. And Woodsmith has done a
wonderful job of actually going beyond just woodworking and incorporating and using other
materials such as plastics or metals or exotic woods or actually exotic hardware that can be used
to build different fixtures and jigs and vices, workbenches, all sorts of things that are handy
in the shop. Well, we all have our personal heroes and one of mine is the founder of Woodsmith
Magazine, Don Peschke. And I had the opportunity to meet him in person this last fall when Dirt
Farmer Maggie and I went back to Des Moines, Iowa to the home offices of Woodsmith for an event
called the Woodsmith Workshop. We got to meet him even though he's no longer associated directly
with Woodsmith Magazine. He owns and operates the Woodsmith store right down the street from
the venue that we actually had this big maker's event at. And here you can see I had a great
opportunity to meet him. Delightful guy. And this is what I said to him when he came out to see me.
I said, Don, you don't know me, but I sure know you. And an hour later of great spirited conversation,
delightful man, I walked away feeling I knew even more about what drives this guy and why he took
the vision to a tangible place and created this great publication, which has helped me over the
years many things that I do in the shop now. And then I passed on to you. Our viewer audience has
come out of the pages of this great magazine. Beyond the really cool experience of meeting Don,
we got to visit both the editorial offices as well as be participants at a great event,
as I told you, called the Woodsmith Workshop held at the end of September, 1st of October of 2019.
Well, during that time, we got to meet the whole cast of the Woodsmith Shop. And here they happen
to be shown on the outside fly cover here. These are the host Logan Wittner, Chris Fitch, and also
Phil Huber. As you can see from this picture here, Maggie and I got to hang out with these guys and go
to some of their workshops as well as see them in action at the editorial offices. Great guys,
enthusiastic and passionate about the craft. It's great to see a younger generation of woodworkers
and craftspeople take it to the next level. Now, this gentleman right here, Chris Fitch,
is an astounding guy. He's the most senior of the group, but is one of those unafraid craftsmen
that use not only wood, but all sorts of other things to create some incredible projects. And
if you subscribe to the magazine, you're going to see lots of projects that he is the designer,
the inventor of, that make its way to patterning and all sorts of things to allow you to build them.
We also get to meet the editor of this magazine, Vince Ancona. Delightful guy. And whenever you
open one of these magazines, you'll always see his listing under his little column called Sawdust.
And there's Vince's signature right there. Just a quality group of people. Well, one of the things
that we really enjoyed about this MAKERS event is there were all sorts of other people who are
passionate about the craft. And there were special guest speakers there, including Stumpy Nubs,
James Hamilton, someone you might watch on YouTube if you want to learn about all sorts
of tools and techniques. Another man that's from Woodworkers Guild of America, George Vandriska,
which we learned how to bandsaw hand-cut dovetail joints, which I'll show you his technique in a
future edition. We also spent some time with Matt Cremona, who is an accomplished woodworker
and resaws all of his own lumber from the tree, and talked to us about that. And the delightful
surprise to us, somebody we're going to highly recommend and feature in another episode, Anne Briggs
of Anne of All Trades. You gotta check out her channel. If you are a lifelong learner, and I
believe you are because you're watching this channel, these are great resources. But check out
Anne Briggs, Anne of All Trades, for a delightful, enthusiastic young woman who, again, is fearless
about learning all sorts of things. Whether it's woodworking, hand tools, restoring an old pickup
truck, rebuilding a motorcycle, making her own carved spoons, or metal and ironworking, including
a forge. Delightful. You'll really enjoy it. Well, we really enjoyed the time we had back with this
great group of people. And as we encounter other events like that that we feel are worthwhile for
you to consider, then we'll pass it on to you. In the meanwhile, if you're interested in subscribing
to this magazine, you can simply visit woodsmith.com and subscribe there. And if you'd like,
you can subscribe to just a weekly tip section by going to woodsmithtips.com and subscribe to
their e-tips area. There's a sign-up area there simply providing your email address. You'll enjoy
the insights it receive every week as you continue to sharpen your skills. Well, if you've got a
resource that you really enjoy that you think your fellow viewers should be aware of, won't you say
something about it down below in the comment section? And in the meanwhile, if you found this
to be helpful, won't you like the video? And better yet, subscribe to our channel and ring the bell so
that as new additions come out, you know about them right away and you can watch things about
the home, the garden, the kitchen, and great learner events. Until the next time, this is Dirt Farmer Jay
from dirtfarmerjay.com.