Here is a free course featuring Brent Roth about different ways to set up rappels through a canyon. This considers ease of rigging, abrasion, ease of rescue and how efficient it is to move people through the canyon. Episodes 1-5 show the systems, Episode 6 shows how it can all be done with 1 device, Episodes 7-8 are friction tests, Episodes 9-10 are break tests of the hardware and the knot blocks. All the episodes are in the textbook
00:00 - Double Static Rope System 02:27 - Adding friction 06:00 - Careful, it's hard to rescue 09:29 - Double Releasable 13:30 - DoubleD Static 20:23 - DoubleD Releaseable
Welcome to our fifth video in our little canyon course set
or little course about canyon rope systems.
And this is definitely not the first video
you should be watching in this course.
In the description, we'll have the blog
which has it all in order.
A lot of these things are not just exclusive to canyoning.
I found them quite interesting and useful as a climber,
a big wall climber, even a highliner
in how we release stuff and how we lower.
This video is gonna be focused on the double rope system
as opposed to the single or the twin ropes
that we did in the past where we would have isolated
or compound where you can release and isolate
and move things around and all of that.
This is something I'm more familiar with as a climber.
This is going to be literally what I'm used to.
The two ends of the rope are going to touch,
well, hopefully touch the ground.
In canyoning, do you want both of these
to be equal length so you can get off
or do you want one to be longer than the other
so you can pull it through as you're swimming away?
Yeah, so I would not, and this is exactly
where you should avoid this system,
not be using this in an aquatic canyon whatsoever.
Gotcha.
This should be like southwest canyoning,
a lot of climbers use, if you're using a rope bag,
you gotta think, how much of this rope
do I wanna restuff?
So maybe I just pull the end out
and I put the rope down, I can see it, it's down.
I drop the bag, it spins out.
Or I carry the bag with me as I rappel down.
But there's no sense, if I only need to rappel 20 feet
and I got 200 feet of rope, just throw it all out there.
In climbing, I'm on the rock till I get down.
In canyoning, you just go down 20 feet
and go somewhere and then down another 40
and down somewhere.
So you don't wanna pull rope out every single time.
Right, I don't need to.
So this is, as you keep saying,
your least favorite system for your context,
but in order to give a comprehensive,
lowering systems rope course set,
we're gonna include this video.
Yeah, and it's also not uncommon.
I do use this a lot, but it's usually secondary.
Meaning, there was a system that I rigged
and then in order to get a retriever to clean it,
and this is what I end up, and you'll say,
it's like, oh, just rappel down.
This is exactly what we need.
As a climber, I would take both these strands
and I would put this in this super shiny ATC
you definitely haven't used.
I've used that.
As a demonstration.
Put the dents in it.
Okay.
And then I would rappel this.
Correct.
You don't have an ATC in the canyon.
You use your eights or your totems or your palicoas.
Palicoa pivot, yep.
There's a lot of these, it's just a modified eight,
and it's modified eight so I can add friction to it.
This, once you set it up and start rappelling,
you can't get any more out of it
unless you do some weird stuff with a redirect and whatnot,
and that's exactly why we use these
is I want friction on the fly.
This is great for the diameters I use,
but some of the dental floss he uses is,
oh, what diameter is this?
This is eight, and this is slippery.
I have found ways to do eights with this,
but yeah, as soon as you start going even thinner,
because you do that sometimes.
Well, yeah, that's out for debate.
This won't do any good for you.
This is even pretty fast with an eight.
So I'm just gonna load both these up in my device,
and here's one of the things
that you gotta be concerned with.
What's the significant difference
between rappelling on an eight with a double strand
in a device like this?
You see this little piece of metal in between there?
So that keeps the two strands separate.
What I gotta be careful of when you're rappelling
is sometimes twists will happen in the rope, right?
It happens, and if I keep moving,
see that twist actually is passing through the device?
Yeah.
And now, there's a twist in the rope here.
Okay.
Doesn't seem like a big deal,
but as you keep going,
the more twists that I introduce into this,
if this has a bunch of twists in it.
It's gonna be a real joy pulling it down.
It's gonna be very difficult,
and it's not uncommon that this will get pinched up
on a rock, and then this is not retrievable.
So it's something.
Or ascendable.
Or ascendable, right?
Maybe.
Yeah, yeah.
For a little while.
Well, actually, I have ascended,
or my buddy has ascended on a stuck rope like that.
Yeah, super sketch.
Very sketchy.
Very, very sketchy.
They say canyoneers are sketchy.
Highliners are probably worse.
Yeah, it was a big old thing, but yeah.
There you go.
Yeah.
So it's something to be aware of.
It's like, I definitely want to do something
to keep these strands from twisting,
because I don't have that little piece of metal in there.
So sometimes for simplicity,
I'll just grab the rope like that,
and I keep those two strands separate as they go through.
I could use a carabiner down here, redirected.
I've seen people do a trick.
This device has a cool little slot right here.
I can clip this.
But the risk is if twists start going through here,
they're going into the device.
They could get jammed up here.
Yep, and they'll get jammed up on top, still stuck.
So ideally you want to prevent twists
from going into the device
instead of dealing with twists afterwards.
So that's one problem you can run into with this system.
Okay.
So even though it seems really simple to set up,
it's like, oh yeah, just throw the end of the rope
through the ring, toss it down, boom, go.
I got to deal with any rope twists, and they will get stuck.
The other problem that it creates,
and why I'm not a super big fan of it,
is that this is a static system.
I can't lower this.
Once I'm on both of these, you cannot, if I got stuck.
Yep, if you're stuck, I can't do anything.
And I have literally given up all my rope into this.
You can't do anything.
I might have some in the bag.
I've got some VT magic.
But it's like, in order for you to rappel down,
for anybody to rappel down a doubled system,
this bag has already been, it's already down.
All your other systems,
you at least had your other half of your rope.
Had something going on.
So if I send you down on this system,
both ends are down, and I don't have a spare rope,
there's nothing I can do.
I can't go down, unless I have a VT.
So this is, this entire video's about
all the reasons you hate this.
But I still use it.
You still use it.
There's always a place to use it,
especially if you're not dealing with water.
Yep.
Ascending.
Ascending these ropes can be challenging as well.
Have you ever ascended two strands like this?
Well, you did show us a neat little trick
in a VT video once.
Oh yeah, I did.
Yeah, yeah.
So I do know your trick.
Spoiler alert.
But if you don't have that,
if you just have your ATC.
Your manually.
Yeah, you better hope it has a guide mode,
or locking, and then getting a press stick
around both of these.
It just makes self-rescue,
it makes rescue very difficult.
Now, we did talk before we turned the camera on
about simul-rappelling.
Yes.
Where you go down your side,
and I go down my side.
And we hope we're way close to the same.
There's a lot of risks with simul-climbing.
One is, if he gets to the end of the rope,
especially if he doesn't have a knot in the end,
which in canyon, aquatic situations,
they don't have knots in the end of the rope.
In almost every other situation I can think of,
you would want a knot in the end of your rope.
And you should, yes.
But, if he doesn't,
and he goes off the end of the rope
to either jump in the pool of water,
or just forgets,
or he just doesn't have one,
and gets off the end,
there's nothing stopping me from going.
Going for the ride.
There's not enough friction up here for,
I'd fall.
Now, one way to prevent that
is clipping me to him with a sling,
maybe like a double length sling.
And this way we're always within
like a body length of each other.
Personal anchor.
This is rated belt loop, right?
My rated belt loop.
And then this way he can't go past me,
I can't go past him.
We also have that in the,
I'm not to simul-climb video,
which was very unhelpful,
except the ending where we talked about that.
A benefit to simul-rappelling
is if there's a lot of loose rock
in a mountaineering situation,
where you can go down together,
and if your feet knock off loose rock,
you don't have your partner below you.
You're pretty much side by side.
So, pros and cons to everything.
There's no one right system for everything.
It also depends on your ability
and how fast you're trying to move.
You oftentimes take new people through canyons.
At least you were dumb enough to do that with me.
So, you're gonna set up systems
where you can lower somebody
if they're in a waterfall and rappelling a waterfall.
Or they're just slow.
Why'd you do that?
I thought I did pretty good with my selfie stick
and rappelling at the same time.
That's just how good I was.
Doing great, Ryan.
Moving so fast.
So, one thing you brought up,
and you felt like it was complicated,
but I don't think it was,
is a doubled system where you can actually make this,
where you can lower this.
And this way you can move abrasion points.
You can get them out of water,
even though you don't like to use this in a water situation.
Right.
So, this is where it gets it.
So, up until this point,
we've always talked about a static system and a releasable.
So, doubled is the releasable version of this.
So, you can have, this is just doubled.
This is the doubled system.
No ED at the end.
So, the idea is putting Ryan on two strands as he rappels,
but I want to be able to release it.
Right, so it could look like a twin releasable system,
but the person is just using both ropes at the same time.
The advantages that gives me is I get everything,
all the advantages of a releasable system,
but putting your weight on two ropes,
and depending if they're separated from each other,
I get some redundancy.
But that's like, okay, if something is sharp enough
to cut one, and then you have a second one.
It'll be a pinging.
Yeah, so it's not really redundant.
So, the idea is like,
but I'm sharing my weight across two strands.
Yeah.
So, it'll be harder to cut
instead of all the force on one.
It would.
But if you wanted to move this while I'm going down it.
Yep.
So, these are the two ends that you're gonna rappel on.
I need to put some friction in here somehow,
and there's, like I said,
you could build a twin releasable system for this,
but if you go back to the twin isolated systems,
there was something that looked very similar to this,
but the friction was created because it was redirected.
I don't have that here.
So, I need.
You got all this extra slack.
Yep.
Because you might want to use it to lower me.
Right.
So, now I need to add more friction,
because that's not enough to hold somebody.
So, now, as you're rappelling on these two strands.
You can lower me up to this point.
Up to however much rope I have left.
Okay.
Once you hit that ring.
That's it.
Can't go any farther.
So, this is a rare occasion where I am so concerned
about an abrasion point or something
that I cannot deal with,
that I want to put you on two strands,
and while you're rappelling,
I'm gonna let a little bit of rope at a time
to move that abrasion point down.
This is a way that I could do that.
Make sure you go check out the website.
Brent has written a textbook
that corresponds with this course.
What's great about making these standalone YouTube videos
is they're more likely to be found.
So, 10,000 or even 30,000 people
are gonna benefit from this information,
which gets us really excited.
Instead of trying to charge for the course
where you're only gonna get one or 200 people
to maybe pay for it.
So, by being able to do this on a shoestring budget,
whereas Brent has donated all of his time,
Andrea has spent days filming for us,
and I have edited all these videos myself,
we're able to make it super, super cheap.
But it does cost money to make,
and we basically need only 1% of the audience
to either donate $1 per episode on Patreon
or buy gear on ExtremeGear.org,
which supports us 10% with whatever you buy.
And they do sell Canyon gear as well now.
As a thank you to my Patreons,
I give them early access to these videos in this course,
whereas they come out once a week
until they are fully released.
We hope you benefit from the content.
Okay, so if I'm worried about abrasion,
one thing I could do is spread the abrasion out.
I could, this is a no-no in climbing
because you wear a groove out in the ring.
But if I attach this to myself,
and I put this strand on rappel,
as I go down, it's moving not only through that ring,
but over the rock, like this.
Exactly.
And there's no single point it's touching.
Now, if there's a very sharp thing,
and you do that, that's a different issue.
It's this stuff back and forth while you rappel,
and it could kill you.
So this is where you've just converted this
into a doubled rope system.
So the definition of a doubled rope system,
easy way to look at it,
is while a person is moving on rappel,
the strands are moving in opposite directions,
meaning one strand is going up,
and one strand is going down on a fixed point.
That is a doubled ED system.
Question.
If this is, what I imagine is the best way,
because no point of your rope,
this'll fuzz up your rope,
but this is going to prevent any abrasion
because you might be trying to lower this to a new spot,
but what if you did that,
and you have a stopper, a way to stop it?
I can reset the whole thing and do it myself.
Yep.
Yeah, so there's-
If there's just two of us,
I'm just imagining two of us.
If you're trying to run eight people through a canyon
and come through an abrasion nightmare,
you're gonna use your compound,
twin compound releasable systems,
where you got two ropes, they're both releasable,
they're independent of each other.
And then this is just a way for the last person
to get down.
So there are techniques that we'll call yo-yoing,
which just means if I go down,
this end of the rope is going with me.
Yeah.
Right?
So I go all the way down to the bottom,
but then this end of the rope is getting closer.
Yes.
If you want to do the same thing,
all you need to do is tie a knot
wherever this ends up being.
Figure eight, clove, or actually butterfly would be great.
And now I just attach that,
because I've already made it down with the same system.
So that's what you connect, you put this in,
and then you just send the rope back the other way.
Ah, you're not resetting the rope.
No, you're just going back and forth.
You're just starting over.
Just like a yo-yo.
What you gotta be careful of, though,
is that when I'm down,
make sure you take your knot out.
You gotta be careful.
All right, so canyon, in your world,
in the water canyon world,
in the very little bit of the canyon world I've seen,
knots at the end of your rope are a no-no,
because you're trying to get off of your rope.
Yeah.
You'd rather fall than drown.
It's a higher risk to drown than it is to fall.
In highly aquatic canyons, yes.
Yes, because you're more likely to,
when you fall off the end of a rope, be in water.
Yes.
But you don't want to be in that water,
stuck on that rope, keeping you under that waterfall.
Right, this is why Petzl did a recall.
Ouch, I might include that.
But in my world, in climbing or anything,
we like to have knots at the end.
So we are very conscientious of making sure there's no knot.
But if you're not used to having knots,
that would suck.
Because a knot like this is not going to get stuck enough
for you to want to justify ascending that.
Nope.
Hopefully it wouldn't get stuck enough like this one,
but this is an eight mil slippery rope.
Yeah.
If I throw a eight and a half or even nine on there,
that definitely will not pull through that ring.
So again, when you get into these weird systems,
and this is why I would almost consider
that this system that so many people use
is a little bit more advanced than what people think,
because of how complicated
and how much you got to think about things
when you start doing weird stuff like this.
Okay, in a canyon context or in general,
out of all of them?
Just in general.
Like just think about the rescue,
like all of these things,
you've really eliminated a lot of stuff with this system
for the ease of it being fast and simple.
Toss and go, they call it.
It's just-
You're not going to be rescuing very easy.
No, and you're not going to be rescuing very easy.
There's not a whole lot I can do about abrasion.
Yeah, you have to funkify this.
You have a doubled system
instead of just your double system for abrasion.
What else?
Ease of rigging, it's easy.
Oh, it's extremely easy.
It's rescues are just awful at that point.
Yep.
That's the biggest issue.
And that's the biggest key.
It's like if I'm looking at,
if there's no reason that I expect there to be a rescue,
then it's not a big deal.
And this is why I think climbers can use this all the time.
They don't even think about these things
because there's usually not a whole lot of stuff
between where they're at
and the next place they're going.
If I need rescuing on a rappel,
it's because I fell off the end of my ropes
and you can basically, you're not in a hurry at that point.
Right.
And you got time.
Like your T-shirt or whatever,
getting caught up in your rappel device,
if you're hanging there,
I got time to fix that versus a cannon
that has water coming down on top of you,
I'm not going to be water.
You know what, you bring up a good point.
Rappelling in caves is where I first heard
about people's hair getting stuck in rappel devices.
I know that can happen in climbing,
it can happen in the caving,
and or even a shirt.
Hair sounds worse and you're stuck.
Imagine a beard.
Yeah.
And so it would be nice to think about the rescue
because if we were climbing and I got something stuck,
oh, this spot right here,
this skin in a highline wheel hangover.
Oh yeah, I guess every sport has something.
Yeah, you're gonna have a hard time getting down to them.
They would have to know how to go back up.
At least safely unweight their rappel device.
Yeah.
So think about that.
If they're free hanging, a lot of cavers rig their ropes
to not touch any rocks
because it's very sharp, it's not weathered rocks.
So yeah, they're free hanging all the time.
If you get something stuck,
you literally have to be able to put an ascender
on that thing.
Yep.
And if it's like this,
you would have to have somebody lock off one side
with some magic ascenders or this
so you can do something instead of,
because you don't have a VT
because you didn't watch our VT Prusik video.
Yeah, and you think about in that moment,
if it is your hair or a piece of skin,
you're not in a really good state of mind
to collectively think through this process.
I like, oh yeah, I wouldn't think so.
So yeah, that's why you said it.
It's complicated very quickly in those situations,
which are not impossible.
I think it's important to think through what could happen,
have a solution for it, even if it sucks.
It's nice to practice this stuff at home
before you go out and need it in real life.
These courses are not meant to be everything you need to know
that's not your only course.
We have all the other courses that you can go through
from other people in our blog.
So in the description,
please go to the blog if you're watching these videos.
It literally has the paper that he put together
to help organize this,
which is the birth of why we even came up
with doing this course at.
So we went over doubled systems.
Yeah.
So we went over double rope,
kind of demonstrated a double releasable.
It's kind of a weird thing.
And we talked about the doubled.
Let me secure this,
and I'm kind of like just lowering myself down.
What we did not get into was a doubled releasable.
Hold on.
What do you call this?
All right, lower me.
I'm super incompetent.
Because that falls into the same category
of me doing my own,
where this is fixed to me,
and I lower myself.
Yeah, so I would just call that a,
because.
That's a lower.
This is, yeah, it's just straight up lower.
He is lowering somebody.
It would be a single releasable.
There's a single rope going down,
and I'm just releasing it.
Your single releasables,
you showed us in the other video,
had this stuff all happen in here,
so you can release it.
My hand would be the eight.
Right, there's friction in there.
There's friction is up here, not on you.
Right.
Which gives you the freedom to move around and stuff.
Yes, it's, I don't have to worry about escaping a belay,
but yeah.
Do you want to talk about that for a second?
Sure.
Since you like to talk about forces,
okay, we'll say Ryan weighs 150 pounds.
He's being nice.
And in order to keep you from moving,
I need to put 150 pounds on my end, right?
That's generally how it goes.
So if there's 150 pounds here and 150 pounds here,
in theory.
Frictionless world.
How much force is here?
In theory, 300.
If.
Now, while he shows us
that we can only have 150 on this bolt,
keep in mind a good bolt can hold a lot more than that.
It's assuming you're using a bolt.
Yes, if you're using a twig.
Small tree, whatnot.
Yes.
This is why like repelling or lowering off your device,
not only does it put you in the system
where you're kind of stuck,
it does add extra force on the anchor.
And if you can do something else,
I'm not in the system,
I'm not putting extra force on the anchor.
It's like kind of going in the right direction in my book.
Okay, so this reduces the force on your.
Anchor.
Blade of grass that you anchored to.
I'll use three.
I prefer three blades of grass is definitely stronger.
Gotcha, and they have to be green, not brown.
Yeah, usually, that's what I would do.
So does that make sense?
That's actually a very good point.
Because I'm thinking in the context
of this beautiful stainless steel.
Actually, these are not stainless steel bolts.
No, those are plated.
You don't need stainless steel bolts.
If you're inside.
Otherwise, use stainless steel.
Yeah, right.
Save a dollar.
So we were getting into a releasable.
Doubled.
System.
So, hold on.
Let me see if I can figure this out.
So I set this up.
Is this where you need a separate rope?
So this orange rope is what I'm going to repel.
Since this rope's a little bit shorter.
Yep.
We can MMO this.
Think about, if I made the decision
that we need a doubled system.
Yeah.
And I need, while you're repelling.
Yeah.
There's a strand of rope going in both directions.
Okay.
And now I want to build a system
that I can release at the anchor
that has kind of the same effect.
I don't know.
What have you accomplished with this?
So, if there was an abrasion point here
and the carabiner goes past it,
now I'm on a single rope.
That doesn't seem to solve anything.
No, it does not.
But it sure looks fancy.
To anchor this, we need, if we had a ring.
Put a ring in here.
But we're going to use a carabiner.
I hear they open.
Yep.
And now I'm going to put,
I need to have some friction in this system
to be able to lower it.
I'm going to use a block.
Got your EMO.
Now.
Gotcha.
Oh, fancy.
Oh, snap.
Fancy.
Tie this to your harness.
Ah.
Well, we're getting really fancy at this point.
Okay.
Right here.
Since I'm more equipped for this right now.
You are more equipped.
Okay, so you're going to,
wow.
Are you repelling on razor blades?
Right, exactly.
The situation that would have to exist
to warrant all of this
is a little ridiculous.
But I think you can see
how the concepts are working.
So this is your doubled.
Doubled.
And you have a doubled built into this.
Yep.
So if I undo your overhand
and get the mule out of there,
I can reduce a little friction since we're not in a.
And see how that's,
so it's not fully
lowering.
Yeah, this one's fixed, this one's moving.
Two strands are weighted.
But that's if it's right here.
And I can also, in six feet,
I can move it a couple,
I can move this a couple inches
for every couple feet you move.
Right.
I can budget how much I'm lowering.
So.
So the ropes are constantly moving over the rub point.
Yeah.
Like I said, this is really,
really kind of ridiculous.
I like the thought experiment though
because it helps you understand what releasable means,
all the options you can do with ropes,
and this is the rope lowering system.
Rope.
Canyon rope systems.
But you only go down in a canyon, is that correct?
If you're doing it right.
Oh, that's a great way to end this.
Hopefully the rating system made sense
that all of these systems can get complicated.
There's a lot of comments who are like,
oh, I would never do that.
Well, situations change.
So the rating system helps you make decisions
a little bit better of when you should use
something over the other.
What's the simplest system that I should start with
and start learning?
What are the systems that I can do the most with
in my canyon or in the area that I'm operating in,
whether it's the Southwest or the Pacific Northwest?
What are the hazards and problems
that I'm actually dealing with?
Those are the things that you really gotta
start thinking about instead of going,
nope, that's too complicated.
I'll never use that.
To make sure we clarify context,
we are in the Pacific Northwest.
That's where you learned a canyon.
And there's water up here.
There are canyons.
There's a lot of water up here.
There are canyons without water.
That changes the game.
There are canyons in other parts of the world
that are naturally gonna have different cultures
on how things are done.
You're getting one viewpoint of how to approach this thing.
What I'm trying to do in this channel is how not to
is get all sorts of different viewpoints.
If you have very strong opinion
and are super nice about how this is done,
maybe we can feature your thoughts
in a very similar fashion.
Make sure you check out the blog
because we're gonna continue to add to this.
This is a moving, fluid thing we're trying to share.
And once I post videos on YouTube, for example,
I can't really alter them.
But I can alter the blog.
It's on our website, hownotto.com.
And in there, we're going to add canyon rope break tests
where basically Brent spent all day in the Slack Snap Lab
and he pulled on stuff and how ropes broke
and what was easy on a tie.
The stone knot was something he liked
because it kept coming undone super easy
regardless of how strong we pulled it.
So there's a lot to learn
from just us randomly breaking stuff.
And if we can pull a storyline out of that, we will.
So make sure you sign up for our emails,
sign up for that you want canyon information.
We have a lot of rabbits we chase.
Tell us which ones you're interested in
so we can send them to you
so you're not depending on the algorithm.
YouTube is not gonna send you everything that we put out.
Now that we're at the end of the course,
here's a challenge I would like to put out
to people that have watched this
that maybe know some of these systems.
Is there a way that they could possibly post
or hashtag a system that you built
with the naming convention that we just went over?
Like build me a twin isolated system
that I didn't show here.
If you wanna make a contribution to the blog
because we cannot add anything to these videos,
we would need a whole thing to make a video
to make it worth putting out a whole video.
But if you wanna write up something
and you wanna take pictures of it
and you wanna make it just where I can just go boop,
give us the context, who you are, why you think that way,
and then we can add it to the blog.
We can do this hive mind collective consciousness thing
where everybody can contribute to this resource.
We're not trying to dominate the space.
We're trying to make it more available through this channel
which cross-pollinates all these sports.
I didn't even know canyoning was a thing
until he hit me up.
So I hope if you don't canyon,
you learn something that you're inspired to go do canyons
because they are cool,
especially if you don't run a wetsuit.
We should do the whole like thing to exit this video.
That was so cheesy.