An open fire produces the majority of its heat directly up the chimney. Installing a wood-burning fireplace insert keeps the good vibes, increases the heat output while lowering your energy costs. This video shows you step by step How to Install a Wood-Burning Fireplace Insert.
Steps: - Measure and prepare your masonry fireplace - Line the chimney - Push your insert into place - Connecting electrical power for the unit - Add a chimney cap - Add the surround or other decor
Materials for How to Install a Wood-Burning Fireplace Insert: - wood-burning fireplace insert - high-temperature silicone sealant - 6-inch-diameter stainless steel vent liner - pipe dope - 1/2-inch cap - chimney cap
Tools for How to Install a Wood-Burning Fireplace Insert: - tin snips - caulk gun - nut driver - screwdriver - two pipe wrenches - acetylene torch, used to cut out damper - angle grinder, used to cut and grind fireplace bricks - hammer sledgehammer and cold chisel, for chopping out fire bricks - pulling cone and rope, used to pull the vent down the chimney
Further Information: Advantages of Installing a wood-burning fireplace insert - An insert helps you get the greatest heat for the least money by improving the efficiency of burning wood thanks to the enclosed design. It helps to cut your heating costs by 10%-40%. - Most wood-burning inserts also include a fan to circulate the warm air around the firebox back into the room for even more efficiency. - It can burn for three to five hours before you need to add wood. - Firewood is an economical fuel in many regions, costing just $922/year to heat a typical home when the wood is burned efficiently. If you cut the wood yourself, it might even be free. If you buy, you support local jobs. - Efficient combustion reduces the amount of noxious gasses and particulates produced by an open fireplace.
Your comments are appreciated! If you find this video useful, please click the Like button and subscribe to our channel. Also, please visit our channel for more useful videos: https://www.ganjing.com/channel/1felgihou7l7KrdqcbjTMjewv1pe0c Thank you!
So Matt, you guys have done a little prep work already.
Yes, we had to come in and grind down the stone.
You can see how the stone sticks out.
Yeah.
It's not even.
Had to grind that down so the insert will slide in flush.
Okay, I see an electrical outlet in the back corner there.
Yeah, we had to get one tin in there for the convection fan.
All right, what's this pipe doing here?
That's actually a half-inch gas line with holes in it to use as a log lighter.
A log lighter.
All right, so is this the shutoff over here?
Yes, turn that on and it lights the logs.
That really beats Kinlan.
Yes.
All right, but that's got to get out of the way, right?
Mm-hmm, we got to cap off that line.
All right, good.
Yeah.
All right, using a couple of wrenches, I will back that line out.
Okay.
All right, and now we will cap that off with a half-inch cap.
Now, with our new insert, we're no longer going to vent into this entire chimney mass.
We're going to use this.
It's a 6-inch stainless steel vent.
This is going to run about 25 feet up through the top of our chimney.
Now, with any fireplace, there is a damper.
You can see it right up in there.
Now, this damper is designed to be able to be opened or closed when the fireplace is on or off
so the heat doesn't go up through the chimney.
But it's in our way.
We can't run this vent pipe, and it's no longer necessary.
So that's got to go.
This damper was actually welded in place when the fireplace was first built.
So this is really the best way to get rid of it.
So even with our damper and frame removed, we still don't have the space we need for our vent pipes.
So these bricks right here have to go.
And the bricks come out with a chisel and a sledgehammer, anything that works.
So now we've got to think about getting our liner down the chimney.
It's actually a two-part liner.
The inner portion is made out of stainless steel, and that's going to carry the flue products.
This will attach right onto the top of our insert.
There's also an aluminum sheathing that's the outer pipe, and in between these two layers is insulation.
How are we going to get this down the chimney?
I'm going to attach a pulling cone to the end of the liner, attach a rope to the pulling cone,
drop it down the chimney, then work the pipe from there.
Now we're going to pull the liner right down the chimney.
Now down here at our insert, we have a couple of connections to make.
One is to connect the liner to this connection right here, but there's also electrical.
Yes, and the electric can connect to either side.
For us, we're going on the right side because that's where the electric is and the firebox.
Good. Good.
To adapt the liner to that insert, you'll notice that there's an adapter fitting with a slight angle to it
and a clamp to tighten onto the liner.
All right, we just tighten it up with a nut driver, tighten up this breeze clamp.
That is not a light unit. Oh, boy.
All right, so plug it in.
Okay, just work your side in.
All good.
Okay, and we're centered.
Good. All right, so we've just got to make up that final flue connection.
At the top of the chimney, there's a finished cap that needs to attach to the liner.
For that, Matt, it has to cut off the excess liner.
Before putting on the cap, we want to make sure we apply high-temperature silicone to the flue tile.
The surround panel goes around the insert.
Really a nice-looking trim package.
Time for fire.
Yes.
So there it is, our very first fire burning perfectly.
You can actually hear the fans bringing that air in through the bottom right behind the firebox,
coming up nice and warmed up.
So, Paula, what do you think?
It looks great.