#46 Log splitter catch! Tractor supply 25 ton log splitter

The Kelley's Country Life
18 followers
Well if y'all been watching the channel you know I've been doing this trail build out here through
the woods and it's getting me a lot of firewood. Some green trees I'm having to cut down which I'm
trying to avoid that as much as I can and then I'm finding blown down trees I'm trying to salvage for
some firewood. You can see behind me I have a little pile of limbs here. I've got limbs like
this all throughout the trail where I've been cutting these trees up. So if you're interested
in a trail build like that and how I'm getting this firewood I'll put a link in the description
below. But what this video is going to be about is I just got a new log rack or log catch for my
county line log splitter. This is kind of one of those must-have accessories. So we're going to
try it out today especially on this smaller stuff. Larger stuff I tend to split sitting on the ground
in the vertical position but the log catch should be a real big help for the horizontal position.
So we're going to find out. I've just got it bolted on. Now I'm going to grab some wood.
We're going to run back up, split, try it out. All right well here it is. I got it bolted on.
Didn't figure I'd show you all that part. It's very very straightforward and simple.
Two bolts. This is already threaded and has a nut welded on the other side but if yours doesn't
this also came with two spare nuts. But like I said real straightforward. Two bolts on there
in just a couple minutes. I'm pleasantly surprised at how thick the steel is. It is really thick steel.
I wasn't expecting a whole lot for $49 or whatever it was I paid for it. I do wish
it was a little larger. I'm kind of concerned about the size but I think for the most part
it'll be okay and it's a good base to start from. I know everybody doesn't have the option that I do
but I do have a welder and a lot of scrap metal so if I feel like I want to make this even bigger
I do have the option to do that. If you're concerned about this tipping if you put a lot
weight on there I was curious about that so I disconnected it from the Ranger and I actually
just put all my weight on the rear. It did not tip so there's no way I'll ever have that much
wood on this rack. So if that's something you're curious about don't worry about that.
So this is pretty straightforward. Not a whole lot to it. This is kind of going to be a
test this rack out slash keep running my log splitter and giving you all updates on that.
If you've watched my other two videos you know I've already kind of done a little bit of a review
on it. I've split a decent amount of wood with it although I did just get it. I've already had
these racks filled all the way up done burnt one down another one partially so I've split several
times with it. This has given me zero problems. Starts up runs great and I have run some really
large oak rounds through this and have not found anything yet that it won't split. So if you're
concerned about a 25 ton log splitter being enough unless you've got some really gnarly huge
wood I wouldn't worry about it. I have split 20 plus inch oak rounds and some of them was in pretty
bad knots in it and this is busted right through it no problem. So let's go ahead and throw some
wood on here and get started and see if this little rack was worth the $50 I paid for it.
Well my concern of this not being big enough has already been answered. I don't know if you
see it from that other angle. An issue that I'm running into I was hoping I could put two to three
pieces of wood on this rack but it's just too small. So what's happening as I come down and
split this wood when it starts splitting it starts wanting to push these logs off onto the ground.
Well at least this one. So it's looking like I'm only going to be able to split one piece and have
one piece on the rack waiting unless I extend this and make it bigger. So if that's going to be a
concern of yours keep that in mind. However I think most people are buying this rack for the
simple fact of when you put a piece of wood up here split it one piece wants to fall off you
want to catch one piece and you don't want that piece falling off on the ground that you got to
pick up again or hitting your motor. So if you're not going to have wood stacked over here and
waiting the catch is going to work just fine for if you're concerned about wood falling off. But
I was hoping to be able to have two or three pieces stacked waiting on me as well as being
able to kind of split and you know deal with the piece. So I don't quite know what I was expecting.
I guess I just thought that would be bigger than it is. So it's looking like I might have to take
one of these pieces off just have one small piece can split lay a piece over and uh that's just
going to be the way it is at least till I modify this. Let me show you what I mean. All right well
my thoughts thus far it's a little more positive than I was thinking once I've got down to a little
bit smaller size wood which I know some of this round stuff I could burn whole. I still like to
split it helps it really dry evenly but once I stack smaller pieces on there you know I have
more room. But if you're going to split larger stuff in this position you're like I said you're
only going to be able to get one piece on there and uh one actually on the splitter. So that's a
bit disappointing but I may fix that down the road and modify this. And if you've watched any of my
other review videos on this log splitter you know I told you I'd be honest if I had any problems
anything going on something disappointing just happened. I got into a really hard knotty piece of
live oak some of this is live oak it's a mixture of wood live it's probably the toughest wood we
have to split down here and it hit a knot and kind of bogged and this started moving real slow
and I don't know if y'all can tell I actually chipped my blade it took a chunk out of this
wasn't no metal in that tree no nothing it just got to an extremely hard knot
stopped for a second then powered down and kept on going but that's extremely disappointing that
this is already chipped. I don't think this is going to affect how this splits wood but if it's
continued to chip down the road I don't know I'm going to try to figure out how to grind this to a
sharp point myself maybe weld a new edge on and then grind that back down but that's kind of
disappointing. Speaking of the cutting edge I had a viewer you know suggest why don't I get a
four-way well I looked at them I'll be honest with you I was extremely disappointed in the
reviews and what I've seen at least the one that fits this model it had a nice main wedge but it
had tiny little wings that come off the side to do the four-way splitting. Complaints online are
those little wings breaking off it doesn't look very well built and there were some complaints
too that it doesn't split wood into four sections very well and I could see that being the wings are
that wide whereas most four-way splitters have outside wings that are much larger so
kind of disappointed to see that so if any of y'all are watching this and have this splitter
and have bought a four-way from somewhere else other than tractor supply that has really good
solid wings drop me a comment below I am interested in one. I don't usually split a whole
lot of smaller round wood like this but you know as you cut up trees it does happen you get
into a mess like this this is where I think a four-way would be nice on the real large pieces
I kind of still like splitting them with a single wedge I know it takes a little longer but I can
control the exact size of pieces that I want so they dry evenly and burn in the fireplace evenly
although I will sit there and tell you I do kind of like mix match pieces so I can use smaller
pieces to get a fire going quicker and coals but I get all my small pieces from splitting these
little round woods so if you know of a good four-way let me know it's disappointing to see
this chip this is the first issue I've had with this splitter I don't think I'm gonna go through
trouble hauling it all the way back to the store and talking to them about it I've had it for I
don't know a couple months now so I don't know how long the warranty is like I said if I have
to I'll build the edge back up and grind it down hopefully I don't have to get to that point it
still looks like it's splitting okay I've still got a good pile of wood split here so I'm gonna
put this thing in fast forward if you have any comments you want to drop any questions for me
about this let me know I'm still cutting a lot of firewood as I build a trail through the woods
out there plus I just found a gigantic oak tree in the back that looks like it needs to come down
so I'll have a lot more firewood videos in the future I'll be pulling this out chainsaw videos
so if you're interested in those click subscribe I try to put a video out every couple days and
we'll show you some more projects around our place thanks for watching
