Stencil vs Hand lettered Seasonal Wood Sign

Welcome to the Woods (Melissa Woods)
160 followers
2 Video Views·Dec 4, 2022
Hey everyone, it's Melissa from Welcome to the Woods.
Today I'm going to be making this versatile seasonal decor that I think is so cute,
and if you agree, click share on this video.
So the steps I did beforehand was I cut a block of wood to be the size that I wanted.
I was basically measuring the stencil that I'm going to use,
and then I stained it two layers of, I think it was jacobine colored stain.
So now it's all ready, it's dry, and in this project I'm going to be
contrasting using a stencil to do lettering on one side of this block,
and then hand lettering on the other, something I'm very used to,
just using a white oil-based white sharpie paint pen.
So I've never done a stencil before, but I wanted to give a try because I know that a lot of my
viewers like to make wood signs with stencils, and I just thought this would be a cute project
to give it a go. I picked out knotty or nice for one side, and I'm going to be using,
see if it fits perfectly, and I'm going to be using deco art paint as well,
the red metallic they sent me and the white pearl, which I just picked out because I
thought it would be pretty. So what I'm going to do so that this doesn't move around is I'm
going to grab some scotch tape and get it centered on there, and then tape it down.
Okay there we go. Now you could also get the sticky back kind of stencils, those ones I think
would work better because you wouldn't have any mess up, like every single piece of it would stick
to your board, but I think that this is also a very economical route and you can reuse this one
again and again and again. If you wanted you could just buy one of these stencils and then make like
a bunch of the same sign as a Christmas present to give people. I feel like I'm cheating on hand
lettering. I can tell already that this is going to need multiple coats of paint because it's not
really coming through, it's soaking into the stained wood a little bit. That's all right,
I can do multiple coats, it's no big deal. So now I'm going to move on to the white pearl.
Go ahead and comment in right now you guys where you're tuning in from,
I'd love to know, and let me know if you've ever made a stenciled wood sign.
Okay so after multiple coats it's finally opaque enough that I think I want to try and take that
off. Okay so this is the thing with stencils that kind of drives me crazy is in order to get them
removed perfectly there's pretty much always some ripping of the paint that you applied
and there's always some ridges and I don't really want to take the time
to go in and touch all this up and I also don't want to take the time
to fix all of these tiny imperfections so it really didn't turn out the way I wanted. However
I will say that I love the pearl color and the you know red colored writing, the paint I like.
Okay well now in rather sharp contrast I'm going to hand letter the other side
without using any stencil or guideline or measuring because I'm just gonna wing it.
So I'm gonna use an oil-based white sharpie paint pen, this is my fave, it does bleed into
the wood a little bit and it works better on painted non-porous surfaces but with the oil-based
it's more likely to sit on top of the wood and I'm gonna be able to go over it twice and it should
be pretty opaque. I'm gonna write let it snow because I wanted the other side of this where
I use the stencil to be more Christmassy and I wanted this side to be more all year round you
know. For spacing I'm just gonna eyeball it but if you needed to you could use a ruler and space
it out. I always work better when I don't have you know when I'm not stressed about it I'm not
trying to plan it out I just do it. So now I'm going to kind of do full calligraphy where I fill
in the up and down strokes thicker. I'm liking all of it except to be honest I'm actually not
liking the snowflake. Let's see if I can pull it up with a little bit of scratching. So since I
stained my wood beforehand I'm literally scratching off the top layer of the wood
and the stain has absorbed through so that's how I kind of erase my mistakes. I'm just using a metal
butter knife. Now if I scrape too much I'm going to get down to raw wood which you can see is kind
of starting to happen. You can always add a little dab of stain but I don't need to because I'm going
to fill in that area with a circle anyway and it's like it never even happened. I'm going to go over
this again. Make sure you work from left to right because you don't want to smear anything before
it's dry. Now okay whenever you need more ink you want to use a different paper to press down
because sometimes ink can explode on you or give you a big like I don't know puddle of ink
and you do not want that to happen on your artwork. Make sure while you're working on this
that you are always shaking this every so often get the ball rolling around and then again I
capped it so I don't accidentally splatter any paint and then also you know using your
sheet of paper that you have to the side to get that tip full of product and ready
sharpie paint pen that I'm thinking since it's dry I'm going to flip it over and I might try and fix
the stencil side with these okay because I mean yeah it just didn't turn out great. I already
started with the white sharpie trying to fix the knife and it's looking pretty good isn't it and I
can just take my metal knife to take in the parts where it over where it went over. Honestly guys I
don't even know if this is worth it but I'm going to try and clean this up a little bit before I
frame out the piece. If you're not uh very confident hand lettering and you want a hand lettered sign
then doing a stencil like this and then filling it in with sharpie paint pen might be the right
way to go. I personally just think this takes a lot more time but I think that's because
I can just freehand it and it turns out good. Okay that cleaned that up okay
now I'm going to take my red sharpie fortunately I have one of these
and try to make naughty look good but this is going to be a lot harder because since the
letters were smaller there's more ridges I even tried to prevent ridges when I painted
you guys can tell I've never done this before can't you that's okay first time for everything
and even people like me who've done a lot of crafts in their lives still mess up sometimes
okay now that I'm done with all of my sharpie paint pen writing and fixing I'm going to frame
out this cute little sign that I made with wood glue and these strips of wood I painted
from leftover project it's just like a one by eight that I cut into strips okay so I need this
to be hoisted up by about a quarter of an inch in order to have the glue dry and have this kind of
suspended in between these the frame so I'm going to break apart a couple of these paint sticks
so that whoa so I can make a little quarter inch thick platform okay so that's perfect
and I'm going to apply wood glue basically on not on this piece at all not on this piece at all
but I'm going to apply to the edges of the entire brown piece and then to these
ends of the white sides so what I'm going to do is I'm going to set something heavy on each side so
it can dry nice and tight together when the glue dried I was all done I hope you guys like this
craft for winter decor and Christmas decor be sure to follow my page if you're not already and click share
