Wire Coil Flower Earrings Tutorial // Day 7 of the 10 Day Wire Earring Making Challenge

Tech Level
93 followers
12 Video Views·Dec 3, 2022
Hey there, Heather Boydwire here and welcome to day seven of the 10 day wire earring making
challenge. So today we're going to make these super cute little springy flower earrings and
they're inspired by an old project that I dug up out of my archives that a friend made many years
ago with wire and wax. And so what you're going to need for the project are 20 gauge wire, you're
going to need your earring hooks, your tools, and you're going to need some beads, either six or
eight millimeter beads, and you need a pen or a knitting needle or a crochet needle, some round
kind of cylinder form to wrap it around. So we'll start by taking a 20 inch piece of wire and we're
going to wind it around our cylinder form and you want to wind it around about 14 times, just
depends on how big that you want the flower, but in any case you want the both sides to be the same.
So wrap them around the same amount of times for both flowers and then just kind of push it in
like that. And then what you're going to do is you're going to actually, wherever your top is,
that's going to be you know where you're going to make your loop at the top after, but you want to
start like make sure that goes off to the side and then you want to start like opening them up
a little bit. So we're just going to go around and we're going to slowly consistently open these up
a little bit so it forms the outside of your flower and be sure not to like rotate the piece
around because you want these to all be in the same position and then just go like that so that
makes your your nice piece. And then what you want to do is this longer end you're going to bend up
so we're going to take this and bend it up at a right angle so we'll just bend this like I'm
going to show you this way so we're just going to bend this up here so it's at a right angle
and we want this part to wrap around there so I'm going to actually like pull this out because you
want it like sticking straight out see like it's sort of sticking straight out to the side there
and then this is going to jump over there come to this side and we want to wrap it around now so it
doesn't get distorted. I always like to start the bend with my pliers so hold it like so you
imagine the position that you want it to be in take your pliers and then just do a bend like
that and then that'll prevent it from actually like distorting and then what you can do is just
pull it so it's a little tighter clip that and here just clip it off and then pinch it in
and then from there you could form a loop at the top so that's going to be how you're going to
hang your hook so just hold this bend it to the side take your round pliers bring it around so
you've got your your round form and then just pull this around with your finger so sometimes
it's better to cut the wire a little too long so you have more give with it so here's our shape
like already you have this shape of the flower so then you just have to decide whether you want the
smaller bead this is a six millimeter or if you want the larger bead that's the eight I kind of
like the way that one looks with the eight millimeter so to attach it we'll take this 24
gauge piece of wire certainly much easier with a thinner wire and we're going to stick the bead on
there and it's okay if one ends a little shorter than the other so we're going to bend this one
way and bend that way so now we have the bead secured with the wires and then place it in here
and what I want you to do is just stick see this is your center point at the bottom so just stick
this to the back and then stick this one through this one here like near the top so we're just
going to stick it in there so now if we hold it here we've got it placed in the middle now the
easiest way to like secure this in place because it's going to be really hard to twist it you could
like do a twist like put these together and twist them in place but what I find is a little easier
is just to bend this up to the top and then twist it around the top and then that way you don't have
to worry too much about you know hanging on to the ends and finishing off the ends there so same
thing so bring this one up to the top and you know you could go on the other side of that center wire
and then just like bend it around so we're just going to twist it around the idea is just to
secure it in place around the top if you use a thin wire it's going to be really discreet you
won't be able to see it so that's great so that's uh and you barely see that wire there so that looks
really cool so there's one so for the second one uh if you want to try a different way to attach it
you can totally do that as well so we're just going to stick these two uh through there so it
it catches on the wires and if you find it easier you can always take these wires and like bend one
to each side and you can like twist it in in place as well if you find that easier I personally
prefer the first method but if you like to do it that way you can totally do that too and I would
just twist it like a few times and then you can take this wire and you could either like cut it
and bend it or you could just simply cut it like halfway through like your little twist there and
you barely you know you can barely feel it but if you do find it pokey just take your pliers and
give it a bend like the wrist to the back so that's another way to attach it it's a little
more discreet because you don't have the wires sticking up at the top so whichever way you find
easier you can do that and then you're going to add your hooks so we're going to take this hook
on here these are really funky earrings I think there's a lot you can do with these
I find them really really cute and fun and you can make the springs any size you want so here we go
our beautiful little springy flower earrings thanks so much for watching the video give it a
big thumbs up if you liked it be sure to subscribe to my channel for lots more DIY wire art and
jewelry making videos hit the notification bell to be notified when I go live and when I post new
videos and if you'd like to join the Facebook group we have the wire art and jewelry makers
club where we share all kinds of photos of our work and inspiration and if you'd like to check
out my work on Etsy my husband and I specialize in custom wedding cake toppers and funky jewelries
I also have a mailing list so if you'd like to join my mailing list you can sign up I'll put
the link below and I'll send you my free wire art essentials ebook so thanks so much for watching
if you're joining the challenge be sure to join the Facebook group and if the challenge is over
no worries you can still join our Facebook group or check out the event page for creations that
people have made in the challenge so thanks again for watching and we'll see you the next time
