How to Make a Wire Beaded Bracelet | Jewelry 101

Cozy Beads
9 followers
Learn how to make a beautiful wire beaded bracelet in this easy step-by-step tutorial! Using simple jewelry wire, colorful beads, and basic tools, you’ll create a stylish bracelet that looks handmade and professional. This DIY project is perfect for beginners or anyone who loves jewelry making. We’ll guide you through measuring, cutting, threading beads, and shaping the wire to fit comfortably around your wrist. The design is versatile—you can mix bead colors, patterns, and sizes to match your own style. Join us and discover how fun and rewarding it is to make your own wire beaded bracelet at home!
#Handmade #bracelet #diy
Hey guys, Susan Thomas again and today I'm going to teach you how to make a bracelet
using basic wire connectors.
So I'm going to teach you how to make a really simple bracelet using basic wire connectors.
It's really easy and I think you're going to have a lot of fun.
First of all, you're going to need some beads and I love turquoise so much so I decided
to start with some turquoise beads and you can choose really any size of beads for this
project.
I'm going to start with 8mm but I have some other sizes here that you could also consider.
These are 10mm, these are 12mm and these are some tiny 4mms.
Any one of them would work or you could mix them all up and just make it kind of crazy.
You're also going to need a clasp of some sort.
I have here a toggle clasp and I also have a lobster claw clasp with a jump ring.
Either one is just fine.
It doesn't matter which one you use.
And then finally, you're going to need some wire and the wire is what kind of holds everything
together.
It's the thing that you don't see when you look at the jewelry but it brings everything
together so it's kind of like the jewelry's underwear, you know?
Under there?
I know.
Everybody can giggle now because I said underwear but it's what holds everything together and
makes it work.
So I've got 2 gauges of wire here.
I'm going to be using 20 gauge wire and I also have some 22 gauge.
So depending on the size beads you're using, that's how you're going to decide which wire
you're going to use.
20 gauge is a little bit bigger than 22 gauge and so if you're using smaller beads, you
might want to switch over to the 22 gauge.
But for my purposes, I'm going to stick with the 20 gauge today because we're going to
be making open wire connectors and so you want to make sure you have a heavy enough
gauge wire so that you can't pull your bracelet apart because that would be sad.
Alright, now you're also going to need some tools and I have here a chain nose plier and
we've talked about this before.
If you guys watched my basic tool video, then you know that a chain nose plier is one of
the essential tools for making jewelry.
And we're going to have a flush cutter because we're doing wire work.
You always want to have a flush cutter when you're doing wire work.
And then finally, I'm going to introduce you to a brand new tool that you've never seen
before.
This is a one-step looper and it's going to make your life so much easier because this
makes loops with just one step.
It cuts and trims loops and makes them all the same size and it makes it so easy to make
this style bracelet.
You're going to love it.
So, that's everything we're going to need to get started.
So get everything laid out and then we'll get going.
So this is my 20 gauge wire.
I'm just using some 20 gauge gold plated wire to make this piece and my turquoise colored
beads.
First thing you're going to do is you're going to cut a length of the 20 gauge wire.
Just cut a piece that's manageable because it doesn't really matter how much you use
because the tool is going to determine the size of the connector.
So first step is to take your one-step looper and if you look at it, right here, see that
little hole right there?
What you're going to do is you're going to go across the guide bar and push the wire
through that hole and then you're going to squeeze it closed and bring that off and see
what I did?
I made a loop.
So that's going to go on one side of my bead like so and now I need to make a loop on the
other side so that I can connect this to another bead.
So we're just going to put the wire back through that same hole and bring the bead right up
next to the edge of the tool and squeeze again, open that up and I'm just going to hold that
out for you so you can really see what happened.
See what I've got there?
That is a beaded connector.
Now I'm going to make quite a few of those because I need to make a bracelet that's going
to be about seven inches long before I add my clasp to fit around my wrist.
I'm going to make another one and then I'll show you how to connect them and that's kind
of the magic.
So another connector right there and then what we're going to do is we are going to
open up this connector with our chain nose plier.
Remember those?
Open and then attach to the next connector and close.
See how that's going to work?
I love this tool so much.
It just makes it so much easier.
I used to have to do this using just a basic round nose plier and the problem was that
my connectors didn't all end up the same size and with this tool, every connector or every
loop ends up the exact same size.
So it makes a really professional looking bracelet even if you didn't know what you
were doing.
The nice thing about making a bracelet with open connectors is you can open it back up
and take off that piece and add something else.
So I'm just going to put my toggle clasp, one end of it, right there on the open connector
and then I'm going to continue making connectors.
When you're taking the wire off of the spool, you're going to need enough wire to make one
of these connectors and in order to do that, you're probably going to need about an inch
and a half of wire total to complete that connector and make it right.
So when I cut this off, I usually will cut an inch and a half to two inches of wire to
start to make any connector.
I don't like to waste a lot of wire so I don't like to do more than that but because I'm
using this tool, I can see that I still have plenty of wire left to put a bead on there
and get a connector on the other side.
So make sure that you cut enough wire to make a full connector.
And then as far as the length of your bracelet is concerned, a standard, kind of average
length bracelet is going to be about seven inches before you attach your clasp.
So once you start getting moving here, you can take the piece and lay it out and kind
of see where you are as far as measurement.
Like right now, and I'm going to use inches because I don't do well with millimeters but
there we go.
Right now, I have about two and a half inches and that's five beads so I'm going to need
to repeat that two more times.
You always want to make sure, I'm going to just get right tight here, make sure that
when you open this up, you twist it open and you twist it closed.
It's going to be, the first thing you're going to want to do is you're going to want to try
to pull that connector open and what's going to happen is then you're going to ruin that
beautiful little circle that you made.
So you never want to pull it open, you always want to twist up and twist down.
You can see that all these connectors are open connectors but because I used that twenty
gauge wire, which is a nice heavier gauge, that it's really, really sturdy so I don't
have to worry about my bracelet coming apart.
And when you're making open connectors like this, you always need to think about gauge.
You're never going to want to use a thin gauged wire like a twenty-four gauge or a twenty-six
gauge to make an open connector because it just would be too easy to pull apart.
I really like my loops to go in the same direction.
So see how that kind of looks like a little bow tie?
So see one loop is on either side of the other as opposed to them being perpendicular, like
turned the wrong way.
So I always want to be able to see through the loop, then see the bead and see through
the loop.
And your bracelet will look a lot nicer if you do it that way.
So that's something to pay attention to as you go along.
If you're wondering how I do that, how I make them go the same direction, that's determined
by how you use this tool right here.
So if you get your first connector done and open that up and there is that connector or
that loop going in this direction and then you put your bead on, when you put your wire
back into the tool and back through that little hole on the other side, you want to make sure
that you turn the loop so it's facing up so that I can see through it.
Now it makes sense like that and then you squeeze it like this and then when you pull
it off, I'll show you that everything is going in the same direction.
So that's a tip that will make a prettier looking bracelet.
And it's a nice idea to, I'm making a huge mess here, you guys don't have to be quite
as messy.
I've got wire shooting everywhere.
Another thing you can do when you're measuring in addition to measuring with your ruler is
you can take your wrist, your own wrist, especially if you're making it for yourself, and you
can wrap it around like this and if the two ends of the connectors touch, see how those
two connectors are touching right there, you've got a bracelet that's big enough for your
wrist.
So my wrist is a little tiny bit smaller than average so this is just about ready for me
to wear.
I'm a little bit short so I'm going to put one more bead on.
Perfect.
Final step, attach the other half of your clasp and I'm using a toggle clasp which is
going to be a loop and a bar.
So since this is an open connector, this step is really, really easy.
I'm just going to twist it open, put the toggle on, and ta-da!
I have a beautiful beaded bracelet.
So look how cute this is!
I love it!
I love it.
I'm really, really happy and that was so easy.
That is how you make a basic bracelet just using very simple wire connectors and a few
tools.
To recap, we used 8mm beads, we used a basic toggle clasp, you can also use a basic lobster
claw clasp and a jump ring, and then we used just some standard tools, chain nose plier,
flush cutter, and the new and exciting one-step looper.
And the wire we used was 20 gauge.
So, so easy, very simple, lots of fun.
Thank you so much for joining me here today to learn how to make a bracelet using basic
wire connectors.
That was so much fun and it was so easy.
You can find the supplies that you need to make this bracelet in the link down below.
Don't forget to like and subscribe and I'll see you again next time.
