Learn to make this pair of wire stud earrings in 15 minutes!

Cozy Beads
9 followers
2 Video Views·Apr 22, 2026
Learn to make this pair of wire stud earrings in 15 minutes!
Hi there, I'm Elizabeth with LA Sandcrafted Jewelry and welcome to my channel where I share tips,
tricks, and tutorials for those looking to learn the art of wire wrapping and wire weaving.
And today in this tutorial, we are going to be creating some flower stud earrings.
And in this tutorial, you're going to need very few materials and tools to create them.
All you're going to need are the basic pliers, as well as some wire and your favorite beads.
In this case, I'm going to be using some spectacular beads from KazDance,
who is the sponsor of today's video.
It's hard to find quality stones out there and to know what you're getting when you're
buying from overseas sellers. But you do not have to worry about that with KazDance.
They're based in the US and have high quality, gorgeous looking stones that will make your
pieces pop and wow anyone who lays their eyes on it. From natural gemstones to glittery cubic
zirconia in all shapes and sizes to fit your style and budget. Not to mention their amazing
customer service. If you have any questions, they're quick to answer them and help you find
the right piece for your project. So be sure to stop by their website and check out their
amazing assortment of stones. So without further ado, let's go ahead and jump into the video.
All right, for tools and materials, what we're going to need are some chain nose pliers,
some round nose pliers and flush cutters. For materials, we're going to need some 20 gauge
wire and some kind of weaving wire. I believe this is 30 gauge. And so I'll be using that
to secure the bead. And as for beads, you can use these are, I believe, three millimeter,
but you can go up to four comfortably. And these are pyrite beads from KazDance. These are some of
my favorites and they're fasted, so they're going to have some extra sparkle. And optional, but not
necessary, is using a chasing hammer and an anvil to add texture to your petals. But you don't have
to do that. It's not necessary. It's just a nice little fine touch that you can do.
Now to get started, I'm going to be working off the spool. And the reason I do that is because
then I can control how much wire that I use. If you want to not use one, you can cut probably
about six inches just to be safe and adjust as needed. It really depends on the size of your
petals. So just keep that in mind. But if it's easier for you to work with just a single strand
rather than working off the spool, you can certainly do that and just cut a six inch piece.
But for me, I am just going to work from spool. Let me zoom in here. So let's go ahead and start
by creating our post. If you want, you can go ahead and nip that end if you have a sharp end
like I do. So just like that. And then I'm going to take a little bit and just bend it over,
leaving about a quarter of an inch or a little bit more than that.
We can always trim that later if we need to. Now to create the petals,
I'm going to grab my round nose pliers and we're going to be working from the bottom here. So
the post will be facing down and I'm just going to stick my round nose pliers in there
and I'm just going to bend the wire like so to create a petal. And if you want,
you can also measure the petal. So as you're going around, you can measure it.
So mine is a about half a centimeter, maybe a little bit over.
So you can eyeball it too. I typically just eyeball it, but I'm going to bend this upward
and compress that wire a little bit. But having a gap there is actually good. So don't compress it
all the way because that's where our weaving wire is going to go through. And then sticking
the round nose pliers in there where the teeth are sitting in the teeth. And I'm just going to
bring that wire around and curve it in a little bit more to create the second petal. And I'm
going to roll that in a little bit more, pull the wire a little bit, and there's the other petal.
And I'm going to do five petals. You can do more or less depending on what you want.
I'm using my chain nose pliers here to bend the wire again,
compress gently, leaving a little bit of a gap, pushing that petal in. And now I'm going to grab
my round nose pliers and repeat this process. And this is going to take some practice and just
feeling the wire. Just take your time and adjust as needed with every petal. You don't want to go
back and try and adjust it after you're done because that's just going to cause more work for
you. Trust me, it will. I'm going to knit out again, compressing the wire, pushing it in just
slightly. Time to create another petal. And you can see sometimes I'm rolling it in with my round
nose pliers so that way I can make them about the same shape and size. And you can always measure
as you go if you want them to be exactly the same size. Compressing, pushing it in just gently.
And again, last petal. Wrapping it around like this. And this wire, you can see it's kind of
going over. I'm actually going to bring that under that and then go around the wrap from this
direction. So this is about how it should look. You can see that they're sitting next to each
other rather than going around this way. And then I'm going to take the wire. Once this petal is
adjusted, I'm going to adjust it a little bit more. Grab it with my chain nose pliers and then begin
bending it like so. It's going to wire together. And I'm going to wrap it around the post.
So I'm going to go ahead and hold the petal still until it's wrapped around a little bit.
Squish that wire around the post and we're just going to hold that while we wrap this wire around
a little bit more using our pliers as needed until we have a nice wrap. And I'm going to trim the wire
leaving a little bit of a section. And then I'm going to squeeze that wire against the post
just like that. And then you can adjust your petals as needed. But here's the basic concept.
And at this point if you want to, you can bring your anvil over and you can lay it this way
or you can lay it this way. This is the better way if you want to have a more flat surface.
If you want more of a textured surface, you would lay it this way and then hammer.
Which I might, I might actually do that. So I'm going to hammer these a little bit.
It's just a drop and drag motion. You can see I don't need to add very much force in order to
flatten the wire. The weight of the hammer should do most of the work. So here you can see my petals
have been flattened a little bit. If you want you can use the bald end to add even more texture to
the petals. You can see this added more of a glittery effect. And from here what I'm going to
do is now I'm going to add some more dimension. You can leave them flat like this if you would
like to. But what I like to do is take my round nose pliers and gently bend them up and curve them
upward. This adds a little bit more dimension. And then push these inner wires down just slightly.
You can use your chain nose pliers for this instead as well. It's a little easier.
So there's my little flower. And now we can move on to adding the bead. All right, so now we're
moving on to adding the bead. And in this case I'm going to be using some 28 gauge weaving wire here.
You can use up to 26 or even 24 gauge, but I highly recommend using some of the finer gauges.
It is easier to hide those ends and make the bead look like it's just kind of standing on its own.
So I'm going to go ahead and cut a decent sized piece, probably about four inches or so.
So about yay long, yay long. Now what I'm going to do is I'm going to wrap it around
this part of the flower where the post comes in and start there. So I'm going to bring my
weaving wire in, leaving a little bit of a tail. So I'm going to hold that there.
And while I'm weaving, I'm going to bring this through the petal and scoot it down with my
fingernail, bring it around that wire again, bring it through the petal again, like so.
And one more time, just for good measure. We don't want this slipping off.
And there's the third time. From there, we're going to flip this over,
leaving the tail piece for now. We'll come back to that in a minute to trim it off.
Just move it out of the way. And now I'm going to grab my bead and string it onto the weaving wire,
like so. From there, we're going to bring it across to the opposite side. That's why we have
little gaps here, so we have plenty of room to work. And I'm going to bring it up through
the adjacent petal. And we're going to wrap the wire around it three times as well. So once,
twice, and then third time, just like so. I'm going to grab my chain nose pliers and scoot
these together a little bit more. Now, at this point, you can trim off using your flush cutters.
I'm just going to do a little bit of a pull and twist. So I'm going to pull, twist the wire
gently, moving that wire around until it pulls off. This leaves a flush end, a little bit more
flush than, well, I should say it's a little softer than your flush cutters. And then we're
going to do the same thing with the tail piece. So pulling gently and just rocking this into circles
until the wire fatigues and gives out, just like that.
From there, you can adjust if you need to.
But here is the stud earring. Like I said, you can use some larger pieces as well.
You also might need to adjust the post like that, so it's a little straight. From there,
you can use your cut fur if you have one. Just stick it in there and then spin it only in one
direction. I tend to do this a little bit and just kind of go in circles. That way,
it softens the end. Otherwise, you can use something like sandpaper or a file.
I actually have some over here. This is some 2,000 grit, but I would probably start with
something like 1,000 and then work my way up to about 3,000. And that's really going to smooth
out the ends. And like I said, you can also use files as well. I have this file set from Rio Grande
and it has a bunch of different types of files. I'll leave some links in the description below
where you can find these. Don't mind the broken one. And here's some different beads here. These
are four millimeter, just to kind of give you an idea of the size. You can see there's a really
pretty sparkly goldstone beads, blue goldstone from KazDam. And this is how they look with a
little bit larger beads and together. You'll also notice that I made sure that the posts are the
same size. I haven't sanded them down yet, but these are ready to go. I also have some links to
some silicone backings that work great for these particular stud earrings. So I'll leave them in
the description below. And I hope you enjoyed this tutorial. If you have any questions at all,
go ahead and leave them in the comment section below as I try to get to them as quickly as I can.
If you're interested in learning more about wire weaving and the process of wire weaving,
I do have a free ebook that is called Weave with Wire. It is available for download. You
can find the link in the description below to learn more. And if you're looking for endless
inspiration, I highly recommend checking out my Artisan Tutorial Vault. There you can find all of
my written tutorials, guides, and ebooks. Links are in the description or there'll be a little card
up above. And if YouTube is right, you're going to like this video next. And until next time, happy weaving.
