Beaded coils wirework bracelet

Handmade Jewelry
2 followers
261 Video Views·Apr 5, 2026
Hello there all my lovely jewelry makers, I'm Christina with CSL designs and in today's
tutorial I'm going to show you how to make these beaded coils wire work bracelets. So what we have
is clusters of coils that are then throughout the bracelet separated by beads that then also
add a touch of color and it can definitely be a very unisex bracelet this. Now it's actually a
pretty easy technique to make this so if you want to learn how to do it then keep watching.
So these are the materials that we're going to need, first of all I have my two different gauges
a regular round copper wire the first gauge here is a one mil that's a thicker gauge and then I
have a 0.8 mil as well and then we'll also need our beads. Now these specific beads are some purple
coated hematite six millimeter rounds of course you can use whatever you want as long as it's that
size but you just need to make sure the holes are large enough to take your 0.8 mil wire through.
So don't forget to check out the description box below the video for the material list and also
any links you might need otherwise let's get all the materials ready here and let's get started.
Now as for the wire that we're using here I'm not actually going to cut a length off because we're
going to be using quite a bit and it's kind of hard to tell exactly how much you're going to need
so what I'm actually doing is working with it off the reel so it's still attached as you can see
I'm just going to keep releasing more wire whenever I need it so I just kind of put that to the side
and then I have this end to start working with. Now what I'm also going to be using are these
I do highly recommend using something like this because you can choose what step on the pliers
you want to use and you know you're going to get exactly that size loop every time you put your
wire around whereas round nose pliers you could use that but because they're tapered it can be
trickier to get the same size you might end up with them slightly uneven so I do recommend these
or something like that. So then to get started here we then grab the wire and also our pliers
now the step that I'm going to be using in this case is the second smallest step so the one at the
very tip but not the smallest one the second smallest and basically start working more or
less right towards the very end of the wire we don't really need much of a tail here now I like
to leave just a little bit but literally just a few millimeters or so but then just kind of make
sure to get my pliers properly I'm going to be wrapping my wire around the larger of these two
at the very tip and then you just want to basically start doing a full circle around
the pliers now you need to make sure that that little end of the wire goes
towards the top so the long end here that I'm working with comes below it and you keep
building like that so you're making basically a little coil here and continue that make sure
the wraps as well are as tight to each other as possible so you don't really want kind of gaps
between them now what we need to make sure is we do the right amount of wraps according to the
beads that we're using so I'm just going to count these one two three four five I have five now and
it's pretty easy to work out because the wire that we're using is one mil and the beads that we're
using are six mil so we're going to need six of them so I just need to do one more and I'm going
off of where the wire end is so that means I have six now with the wire going out in this direction
counting six all the way now then what we need to do is I'm taking my pliers out and start doing
the next cluster of loops here so what I'm going to do is place my pliers making sure again that
I'm using that same size on my pliers right next to the first cluster there as close as it'll get
basically place the pliers and grab onto it now make sure the wire is coming straight out to the
then you want to keep going in the same direction so I'm twisting my wire here in the same direction
with my wrist and again it's coming below everything we've already made so it's kind of
going to build and grow this way so you can see I'm coiling below here and we basically need to
make the same amount of coils now so just stop and count one two three four five I'm just going
to do one more and in this case from now on when I know a coil is done obviously that count them
but then we need the wire here the long end to be going towards the other side and that's then
when we know we've done the full amount so that's now completed that final coil because that means
now I can take my pliers out put them again on my wire next to that one we can actually use the
previous coil which was the first one in this case put the pliers back into that just a little bit
and we can actually use that as a guide put your pliers clamp down on it and you just want to start
wrapping again and again just like before below so there we go and the principle same amount of
wraps making sure they're nice and tight together and in this case I've completed it when I think I
have five now so I just need to do one more I'll complete it again when the wire goes towards the
other side because then you can also start to see that we're actually going to get these little
points where the wire kind of crosses from one side to the other so you have it there you don't
have it on this one but you're going to have on this one because I'll flip it to the other side
it alternates so it's the opposite ones where you have the wire crossing over and this is basically
how you want to continue you have that going straight out just double count one two three
four five six put your pliers in again you can use the previous one as a guide and then start
your next coil and you just want to keep going like this until you have the length that you need
so I now kept making my clusters of coils here you can see I have my length from one end to the
other and both sides look the same they're just opposite each other for where the wire crosses
over there to the opposite coil now because I have the length I'm going to use I can cut off
the excess wire so take my flush cutters and again we don't need much of a tail here so I'm
just going to cut it close to where my last wrap is something like that and then I have my
length of clusters what I'm then just going to do is before we move on I want to just kind of finish
off the ends where I cut the wire off so I just take my chain nose pliers and all I'm going to do
is I've made sure to cut the wire so it's kind of towards the middle you look between the clusters
of coils and then that little end I'm just going to bring it in a little bit not too much but just
have it kind of point inwards towards the middle of the coil instead of sticking out a bit it's
just so it kind of goes out of the way and it's not going to catch or scratch on any skin or clothes
and obviously you want to do the same with the other end as well so then the next step is to
put the beads in and to do that I cut a length of my 0.8 mil of about 60 centimeters so then take
my length of wire here and I first of all need to find where the midpoint is so I'm just going to
put the ends together and then just bring them down towards where that midpoint is so I'm not
going to push it tight or anything just want to gently find that midpoint so I know that's where
my curve is here I'm then going to take my six step bell making pliers I'm going to choose the
size loop that I want for the loop in the class to be because I'm going to be making the class part
of this as well so choose that I'm using the second largest one and then you just want to
shape the wire around that loop so we get a full circle so something a bit like that and then
we obviously need to just move these wires bring them back up and outward so where that crossover
point is and they kind of kind of say that's the middle and then I'm going to start with one wire
and bend it back outward so it goes away from the loop like that and then I'm going to do the
other one as well try and get it as symmetrical as possible and bend that in the same direction
and of course if you need to we can just straighten the wires out
so this is basically the beginning it's the loop in the clasp but it's also going to be the
beginning of how we're going to now add in the beads so the first thing I'm going to do before
I actually start bringing this wire or these wires through the coils is take one bead and add that
onto one of the lengths here and then just let it drop all the way down that's just going to sit
there for now and now I'm going to go back to the ends don't worry too much about that bead it's
going to move around a little bit it's going to get put tightly in place towards the end but basically
that bead that we add is going to be the very first one so that's why we just need to make sure
we add that first obviously otherwise it's going to be too late but then we need to start bringing
these wires through the coils now this part can be a little bit fiddly but just take your time
so obviously one length is going to stay on one side and the other length is going to stay on the
other side remember the wire where you added the bead is going to be the wire that goes through
the one that has the gap to begin with but then I'm just going to have my beads ready here
I'm putting the other wire through the first coil and then there's kind of a few different
ways where you can do this you're going to find your own rhythm you can either put the wire through
the coil and then add the bead pop it into place and then kind of take the wire back out
but just enough so it can go through the next coil so I've just added that first bead then I'm
going to put the other wire through on the other side so that was one way or you can just slightly
have it showing there and then just find where the hole in the bead is put it into the gap
and then have the wire find the hole in the bead and then push it all the way through and
into the next coil so there's a few different ways you can do it like I said you're going to
find your own preference and like I said it can also be a bit fiddly sometimes it can be a bit
hard to get the wire through and try and make sure you don't get kinks and bends in the wire because
then it can be even harder to push through you can also sometimes use your pliers to kind of help
grab onto the tips of the wire if you need to but basically all you got to do now is keep
going from side to side doing one at a time adding beads in along the way into all the gaps between
the clusters of the coils and then making sure the wire goes through that next coil as well
so you just keep doing that until the other end so I now made it all the way to the other end and
you can see I'm just missing that last bead I'm just going to leave that for now just because
just get the wires completely through so you can just keep pushing on this end here
or obviously we could also start pulling on this end I'm just going to make sure to do a little
time on either side not just do one side completely because we do have this loop to
think about don't want that to go out of shape too much so just bring the wires all the way through
until the loop down here is tight against this end so the loop is now tight all the way down
here in this end and the other end then I can just add that final bead without worrying about it
falling off while I'm working with it and then it's going to slot into that very last gap that
we have and then also you just want to make sure that you pull the wire nice and tight here so you
don't have any kind of too much wire sticking out of the wire we made the loop with and it all
becomes nice and tight all the beads and all the coils as well so what we got to do on this end now
is use these ends to make the other end of the clasp wood so that means that on this end here
we need to make the hook so first of all I can take my chain nose and basically bring these two
wires together so I'm gonna take one first and then bend it towards the middle or towards the
other one you could say and then just the same with it on so the basic crossing towards each
other and that also helps lock all the beads and the coils in place so then we're gonna choose one
of them to bring straight out from the middle doesn't really matter which one so I'm going to
put a bend into that so it comes straight out from the end there and then I'm just going to take the
other wire that's kind of naturally already crossing over it and we need to then wrap that
around a couple of times to fasten it in place so just wrap it two to three times or so make sure
the wraps come nice and tight together so something a bit like that you can always use your
pliers whenever you need to and then it's going to bring it all the way around to the back here
I'm going to cut off the excess of the wire that I just wrapped like that and then make sure to
squeeze down that little end of the wire that's been sticking up so what we have left now is that
single wire which I'm going to use to make the hook with so I'm just going to bring it place
my pliers a bit further out now it's up to you really how large you want this hook to be
it's personal preference really but then I place my pliers you can see they're sideways
on the wire but relation to my bracelet and then I'm going to bend against the pliers the end of it
and I'm going to bring it all the way down so it sits next to itself like that and then we need to
tighten this bend up as much as possible basically as if we were making a prong just tighten it up
nicely and then the wire is coming down straight next to itself then I'm going to place my pliers
further down close to where the initial wraps are but leave just a little bit of space I just
want to check where my final wrap was from that round then I take the end and push it up against
my pliers but again a little bit above those wraps so there's some space because I'm then
going to take the end and start wrapping it around the other wire it's sitting next to
to basically fill in that little gap and meet up with the other wraps
and I'm just holding on to this with my pliers so it doesn't move around too much
so just keep wrapping until you've basically run out of space and see if I can get one more wrap in
there make it nice and tight and then I'm on the back like that cut off the excess and then of
course like before you want to make sure to just squeeze that down because if you feel it with your
fingers you can feel a bit of the wire sticking up and we want to make sure that that's not going
to irritate while wearing it so that's now also the wire gotten rid of now obviously we now have
this straight piece all that's left to do then is shape it into the hook shape so I like to get
again my six step bell making pliers you can use any kind of bail or shape or even crochet hooks
are good for that as well you can also use round nose pliers but personally because they're tapered
that's why I don't really use them but I'm then going to take a smaller step on my pliers
and place it about the middle but a little bit below the middle of this piece that we made the
long length and then push the end around the pliers so you get that shape and I like to bring
it pretty close in because then what I do is the very end I take my chain nose pliers and the very
tip there and just bring it back out so put a little bend into it so that's where you then get
that hook shape so this is all in place now so all that's left is to shape this bracelet so we
can obviously use the clasp as well so you can either shape this around something as a size and
shape you want it to have like a bracelet mandrel or something else or you just use your hands and
fingers like I'm going to do so just go into a place and start putting a curve into it so don't
go into one place and just put a big bend but just get a gradual curve go into the one side and then
moving back around to the other side and then putting a gradual curve more and more that we're
going to end up bringing the two ends together so we can obviously then use the clasp so just keep
doing that until it has the shape you want now I personally prefer an oval shape more than a round
shape because I feel like it sits better on the wrist that's personal preference but then when
you got it all the way towards each other you can then obviously see the clasp can be used and
then if you're happy with the shape your bracelet is done so you can see it's a pretty simple and
easy technique that we're using here but it gives a very big impact on the wrist and I also feel
like depending what materials that you choose to put together it worked brilliantly for men's
jewelry now the one that I made in this tutorial here does have quite a chunky look to it because
of the materials that are used but you can also use other materials to give it a different look
for instance I made one as well where it's got a finer look because I used smaller beads and a
finer gauge wire so obviously it's completely up to you which one you prefer and to make the final
one I use the same technique that I used to make the matching rings with so you can check that
tutorial out when it's available to see how I made the final one but of course I just made it longer
and attached a clasp as well so I really hope you enjoyed this tutorial thank you so much for
watching it and I'll see you in the next one
