This week we're shedding the light on a new project! We're making DIY solar lanterns! These lanterns were a quick DIY afternoon craft project. We purchased 1" square poplar dowels and with just a few cuts, were able to transform them into beautiful porch decor! This is definitely an easy level 1 DIY! Come watch us #doitbuilditmakeit!
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
We just made these two inexpensive solar lanterns in about 30 minutes and we'll show you how we did
it right now. What is up? Welcome back. Do you like to do it, build it, or make it? So do we,
and we have a new video each week. This week me and Pockets are putting together some lanterns
getting ready for Paul Revere's midnight ride. Well I don't know about the midnight ride,
but we are going to make some lanterns, some solar lanterns this week. It's summertime
and we like sitting out on our porch and we have a standing post with a little
solar lantern on it. Super cute. So now we want some on our stairs to kind of light up our walkway
a little bit. So we're going to show you how to build those. They're going to be super quick,
super easy, and pretty affordable. Oh yeah. Step one. We're going to gather all of our supplies.
We needed a solar light because we're making a solar lantern. Well we're going to make two of
them. So we have two solar lights. We're going to make a 12 inch and an 18 inch. So what do we
need? So we're going to need some one inch dowels. We have a couple of 36 inches. We're going to cut
them in half. Those are our 18 inches. And we needed some 3 8 inch dowels because we're going
to need a little lip to set this solar lamp onto. And then we found these cute little poplar one
inch dowels already cut at 12 inches. This is what makes this project so easy is that these are
already cut. So you only have to make a few small cuts. So if you're itching for a project with your
pocket saw this is like the perfect little quick and easy afternoon project. Anytime I have to make
less cuts is a win in my book. We also needed some brad nails. These are inch and a half and some
glue. And I think that is it. I think that's it. Step two. We're going to make all of our cuts.
We're going to start by cutting this 36 inch one inch dowel in half. We need four 18 inchers.
We're going to make all of these cuts with my friend, your friend, my pocket saw.
Safety first Garrett. Safety first Kim. Now we're going to cut 12 of these one inch dowels down to
three and seven eighths. But I'm going to use a piece of scrap wood as a stop block so that they're
all exactly three and seven eighths. And we're only doing them three and seven eighths because
these are 12 inch pieces and we want to get three out of them. So you can't get four
because of the width of the blade. So we'll get three and seven eighths.
Now we're going to cut two of the three eighths inch dowels down to three and seven eighths and
Step three. Time to assemble it. We're going to make two frames that kind of look like this
and then we're going to pin those two frames together with some small pieces again.
Super easy. Super easy. Let's make sure all these little pieces land in the same spot.
I'm going to draw a line first. So we have one that goes at the top and we're going to have one
goes a little bit down and I'm going to use one as a spacer. I'm going to turn them all to one side.
Now why are you doing this? That way I'll know on two sides
where that little brace should land. All right now let's pin them together.
I'm going to try to make sure it's this way.
A little bit of glue. A little dab. A little dab of glue. Don't get crazy with the glue
like I just did. That might be a little too much. So I use a little little smidge of glue.
Now we're going to hit it with a one and a half inch brad. The nail not the guy.
All right this is it. You want to put the little frame in now?
I want to I want to look and see like for this one. Do I want to set it in there?
Do I want to set it on top? Maybe I just leave it. Do we set it flush? Do we set it up on top?
Does it go a whole other level down? What do you think? I'm saying it sits on top. I think it'll
look kind of cool sitting just up on top. Just like a little lantern on top. Yeah a little lantern
up on top. All right I like it. So we're going to put the little three and seven eighth inch piece
right in the lip. Two of those. And then we're going to put this little three inch piece right
in there. That's because the little solar lanterns that we have chosen are actually the exact width
of this opening. So it needs just a tiny little little lip to hold it. All right before I paint
I'm going to go ahead and fill each of these little nail holes with some wood filler and any
little gaps that I might see. It looks pretty tight but we're going to do that and then let it dry
and sand the little the little holes there before we get ready to paint.
Step four. Now we paint. We're going to use the Country Chic Simplicity. Just throw a quick coat
on here. Yeah the great thing about these is they're so versatile. You can stain them. You can
paint them. We talked about lots of different paint schemes but settled on something pretty
universal. We're going to do white. We're going to add a coat of this Antiquing Wax right over it
to give it that distressed look. Yeah that way we don't actually have to distress it. Yes.
Now we're just going to slap them up flip them and rub them down
with a little wax. A little Antiquing Wax. What he means is. I'm going to give a little dab.
A harder dab. It's been a minute. Don't worry. I'm going to rub it off and just hit some of these
pieces right. Corners and stuff. You want to do more than that. No I don't really know what I want to do.
Yeah I want it a little more. Yeah yeah. Don't be afraid of the wax Garrett. Be one with the wax.
Yeah I'm liking it. I'm liking it. Where's my little buff cloth? I need it.
I wonder if I could just use this paper towel here. Yeah.
Man looks like I found that thing out in the garage. Yeah.
All right. Brand new super old looking. Yeah I wanted that distressed look. I got it.
All right so to finish up this paint job we are going to add. Where's that?
A top coat. So you can spray this with polycrylic but I'm going to add some tough coat on this.
Tough coat. This makes it so this is great for things like the top of a table where you might
have a lot of wear and tear. Yes a lot of wear and tear. These are going to sit outside and also sit
on the ground. So I'm hoping this top coat, top coat, tough coat is going to add a nice layer of
protection on these. So I'm going to go ahead and add that. TCTC. Step five and now we add the accent.
Well we're just going to put the light in the top. That's really all that's happening. Well not just
put the light in the top. This is what's going to make it a lantern. This is like the accent. This
is the main thing of the whole thing. Time to add the accent. It's a big deal. It's a big deal. We have a
little a little nub at the bottom of this thing. So we're gonna cut that off and then just drop it
in there. This little fisker saw is so great. Love this little thing.
Yeah look. Can you see them lighting up? I don't know if you can see.
Well we're gonna go take some, show you some pictures right now.
All right what'd you think? Super easy right? Crazy easy. A couple of cuts, just a little bit
of glue, a few nails. Well and you can make them just different sizes. You see all we did was change
the size of the arms, the legs here. I want to make a third one. I really have time and I only
bought two of the lanterns. But I want to make like a six inch version and have it as like a
tabletop version. I think they're so cute and you can display three of them together. How cute would
the third one be? Yeah without the paint this only took a couple of minutes. I'd say 30 minutes to
put these together and then the rest of the time was probably paint and waiting for this stuff to
dry. Yeah yeah complete the whole project in an afternoon. Just pump these out. Great big thanks
to our patrons. We love you guys. Oh were you gonna say something? That interrupts you. That's
fine. I was just gonna say they would make great gifts or make great accents for weddings. It's
wedding season. Oh yes. You could put these on tables because you can add little things flower
and greenery on the inside of these. Oh good idea. Yeah yeah I know you're always with the ideas.
But we're about out of time so if you're not going to join us for the patron after show
we will see you next Friday where we'll do it build it and make it again. Or you can join us
on Tuesday afternoons at four where we're always painting a new sign with a new design. So come
check us out and hang out with us. New sign design on Tuesdays. It's like test cut Tuesdays.
Yeah it's at live. We do a live on Tuesday.