What's up guys welcome back to another video. In today's video I'm going to be working on my BMW. I mean, um
Toyota wait, I think it's toyota toyota
So I don't know why for the longest time I've only said Toyota and no one's ever corrected me in my entire life
And I know it's spelled out t-o-y like toy and then yoda, but I don't know why my entire life
I just always said it Toyota and no one ever corrected me. So, um, yeah, I guess I guess now since I own a
Toyota I have to say toyota
But at the end of the day, I'm gonna constantly say to BMW because just because of these Toyota badges
Don't let that fool you. This is a BMW. So welcome to my BMW Supra
Today's goal is to finally get this thing a clean wash
I want to get this thing washed up now
Obviously the driver's window can close but the passenger window which is where all the damage is at that does not close whatsoever
So I want to roll up the car
I want to clean as much of the car as possible
And then I also want to start removing some things and get that stuff rebuilt for example
Thank goodness. No one was sitting passenger because if somebody was sitting passenger this would have got seized up
This was actually perfectly good dash airbag did not deploy
I think the seat buckle is also good. You guys can see how much it kind of sticks out
This is the driver's one the seat buckle. I mean, honestly, it might be still good
I don't know
we're gonna have to run the codes and actually check on that but someone was
Obviously sitting in the driver's seat because this seatbelt I'm not PSNC is just dangling. It's just it's dangling
It's seized up. This needs to get rebuilt. I figured while we get these seatbelts rebuilt
We might actually get some yellow ones installed as well to match the paint
I'm actually thinking do yellow seatbelts and a custom steering wheel with a yellow stripe
Let me know let me know what you guys think about that, but I think it looks super sick
See, I want to pull out the seat belts pull out the seat buckles
Probably take that stuff down to L&D solutions to get rebuilt. I bet that's a lot cheaper than actually getting new parts
I've been doing so much research on used parts for this car guys
And there's literally nothing like even doors
I can only come like two or three people are overpriced in the heck out of them side skirts
I did get it for a really cheap. Yeah, they got a side script like 200 bucks
That's really cheap. But in terms of a quarter panel cheapest quarter panel can find we're talking like two three grand
I did actually find someone on eBay that's willing to chop this car and sell me exactly what I mean
So I think the first thing I want to do is just get this thing in running order
I'm gonna put all the airbags get the airbag like to go away
So it's safe to drive and then actually drive this thing down to my frame guy and have them diagnose it
And let me know what I need to do exactly
Do I need an entire quarter panel from from pretty much the outside to the inside?
I honestly don't know mainly because this whole section is good. There is no gap issues here
I might want to do a section install and I don't know if a section install is professional
But I know there's three ways to go about this
There's the first way which you can pull up the images and then you just borrow the whole thing up and then you call it
A day, which is the janky way. Yeah, that's the cheapest way
But you will see the bondo Wade marks eventually when you close the door multiple times
They'll eventually crack all that bondo and that's just a very cheap way to do it
But I've seen cars like that before like an e60 m5 that I went to go look at one time the entire side
Passenger side was bonded up so you can just tell I didn't even have to knock on it
You were able to just tell it was all bondo
So that is a cheap way to be $500 to do something like that
Now the most expensive way is to get it cut from right over here and get it cut right over here and get it cut
From the back of the trunk like right over here and absolutely gut everything in the interior exterior of the car
And get that replaced like you can just genuinely cut the whole frame remove the seats remove the carpets
Cut it from like midway through the seats
I mean there is that expensive way which obviously will fix it like a hundred percent
It's just that we're talking probably parts alone three G's labor probably another three G's six grand to get that sorted
I know I said there's three ways, but there's actually four ways the fourth way
I don't know if I'm gonna go about it just yet
But uh let me explain to you guys the second way so you guys heard the most expensive you guys heard the least expensive
So the medium one is actually sectioning off the damages what I could do is probably because this honestly guys. It's actually good
This is where it's supposed to be this damage right here
If I was to cut this probably go around the gas cap all the way down section that off honestly
I might even go down there and try to film all this and then probably get a section like right over here or possibly right
Over here. We'll see we just need to get obviously all this stuff pulled out because honestly the only damage is right over here
There's no buckles in there. Yeah, it's it's it's bent a little but that can get pulled out
No problem, and there's no buckles back here
So let me know if a sectioning is the best way to go
I think a sectioning would cost so much cheaper
Still doing a proper job because we're replacing the necessary stuff that needs to be replaced
So there's not gonna be any buckles no extra excess Bondo or anything like that and obviously the last thing we can do
Which you know it's an option
I think this car is already girthy as it is and I've been
Contemplating it all night whether or not I want to do a wide body kit on this car
What we can do honestly is just get this all pulled out and then just kind of shape the metal
You know pull out the metal as much as we can and then honestly cut it all off
We can cut it all off replace the door
Replace the side skirt cut the side skirt do what we need to do cut the inner liner
Because we can technically cut the quarter panel like all right here for adding a wide body on here
It is gonna make it way wider than what it is already, but honestly guys
I think this thing already has enough girth nation like I don't know if I want an extra
You know like five or six inches of girth to it
I think it's a little too much. I think this car was already designed with enough girth
I mean like sheesh look at that if he did go with the wide body kit
I mean there's a lot of options out there
But also at the same time if I want to do any power stuff with this car
It is gonna be a lot heavier for example
It's a b58 if I want to push 400 reliably I probably can if I want to push 450 reliably
I probably can but with the wide body
Then I have to go with air suspension if I have to go some three-piece bigger wheels and some bigger tires
I probably not gonna be pushing numbers anywhere close to where it was stock originally
But it would look really good, and that's where I'm kind of like contemplating
I don't know exactly what I'm doing right now
But as of right now what we need to do is obviously get this thing in running order it does run and drive
I'm hoping it should be taking this out for a test drive in the near future
So first things first actually getting all this airbag stuff
You know dialed in so we can get that light off the dash, but before we actually get into that
Today's video is sponsored by Carly
And check what codes we are and see what things actually deployed in the accident is our seat buckle good because it looks good
But only a code can tell so for those of you guys who don't know what Carly is Carly is a BMW scanner
And yeah, I mean this is a BMW. I mean just just ignore the bad BMW badge right there
But honestly this adapter is a universal adapter will work on a lot of other cars as well
I just use it for a lot of BMW stuff
And I love it for BMWs because you can also do custom coding this car in particular when you hold the lock button
I noticed that the mirror caps roll in already, so I don't know if that's coded or
That's how it comes in actually, but that's something you guys can code in with your BMW and when you unlock your car
You guys can hear the BMW chime and everything it unlocks the mirrors
That's let me get it coated with Carly now when I hold the lock button my window doesn't roll up
That's something it coated with Carly if you get a new battery in the car
You don't have to take it to BMW and get that coated by BMW
There's so many things you get coated with Carly that makes life so much easier
But today's goal is to just diagnose
What's blown, and what's not all right guys not only got Carly hooked up
Let's just go ahead and connect our phone for those of you guys who also don't know Carly is a Bluetooth device
So I know wires connected straight to your phone
I believe it also works with Android, but don't quote me on that
I think maybe they have a separate Android adapter and a Apple adapter, so that's what I think they have going about them
This is a universal adapter this might work for both, but again
I'm not a hundred percent sure on that make sure to check out the website down below and once I'm actually in health
I'm just gonna go ahead and run the diagnostics and right now
It's just pretty much running the codes seeing what codes are in the car, and what is not
I have a lot of you guys that always ask me nor bro like what's going on dude
I replaced all the airbags in my car placed even the seatbelts, and I still have an airbag light
Carly's gonna be able to tell you exactly what that is it could be the sensor itself because once you get the accident the sensor
Could be damaged or the wire put a rip for the sensor or it could be you're just your seat buckler and without honestly a
Code reader you were just gonna have to go check everything
But obviously if you already reassembled your entire car
It's gonna be super hard to find out if it's the sensor or not so having the Carly adapter does make life a whole lot
Easier alright guys after running the codes no check engine stuff came back
Which is a really good sign so thankfully again everything is great in the Navy with that
But we do have 13 airbag lights the car access system is also throwing in some issues
But obviously we have an entire door. That's pretty much smashed so but yeah that could be the result for that issue
We're going to check the rest of these errors probably later
But the primary thing as you guys can see in the red we have 13 airbag faults
So if we're just going to run through this the first one says real tensioner driver short circuit to ground real tensioner driver short circuit
To negative so the tensioner itself for the seat buckle
I believe that is what that code is for the head airbag right so obviously that means the current airbag for the right side
So this is left side, and that's clearly noticeable the right side is deployed
It says belt force limiter driver resistance too big force limiter driver resistance too big so belt force
That itself. I believe is the seat belt this one is already pretty much seized up. It's not coming out
Um that's one way to check is just tugging on it. It doesn't go back in it's bad the third thing
It says resistance too small on that honestly could be the sensor itself
And then the last one is real tensioner driver resistance too big so obviously it's only throwing stuff for the driver side
The rest of these are honestly just random faults that's probably getting thrown because of these main faults
So it looks like honestly two current airbags the driver seat belt and the driver's seat belt tensioner, so that's pretty good
It also could be
Possibly maybe the sensor as well for the passenger side
But we won't know honestly until we get the rest of these knocked out so yeah
That's what's cool about Carly, but I without further ado
Let's go ahead and just take this seat out remove the seat buckle remove the seat belts both of them actually because we're gonna get
Them done in yellow, which is even pretty safe
I
Was probably one of the easiest seats to pull out guys this thing is so soft and super easy to carry honestly
I don't know if this is real leather fake leather for those of you guys who are super fans
You'll be able to let me know down below, but this feels really nice and very comfortable
Yeah, one easy connection there, and then to actually remove the seatbelt though
We do have to remove it off of here so that being said I think yeah
There's a clip right in here once you move that clip
There's just a bolt and this seat belt just comes off and the tensioner itself
It looks like it's not one of those tensioners that you can tell if it's deployed or not or maybe this tensioner is good
I honestly have no idea because this doesn't look like it's deployed. It looks perfectly fine in my opinion
Now I don't really know how hard it is gonna be able to get this seat belt out
We're gonna start pulling things apart because I've actually never done this before obviously and I don't think there's much videos on this on YouTube
either so let's just go ahead and send it and
I'm just gonna pretty much do it the way. I would do it if it was a BMW
And
I probably should have worked my way down
So I was afraid when removing these because I'm BMWs the speakers are actually attached to the speaker grill
But this isn't the case in a Toyota BMW so long story short
I popped off this guy then you're supposed to pop off this guy
And then you pop off the last one and the way the clips are held in is into the actual carpet
I've never actually seen that so actually I broke all the clips on that and actually I broke this piece as well
So this entire piece needs to be replaced not a big deal
I'm sure this is not like too expensive like 15 now. I would say about 20 or 50 bucks max on eBay
But yeah, not a big deal. I'm happy. I broke probably the cheapest piece rather than that piece that piece looks expensive this piece
I can't imagine it costing too much, but yeah guys. We got the seat belt out. This is a two-stage seat belt
So this will probably cost about 120 to 150 to get rebuilt
I think Toyota charges $200 for a new belt or $300 for a new belt so regardless
It's gonna be cheaper to rebuild this one and at the same time while it's getting rebuilt
I'm gonna have them redo the belt in yellow
So probably a whole lot cheaper while we're doing it all at the same time
Yeah guys
We kind of did half the battle
Because we're gonna have to remove the headliner sooner remove pretty much everything out of the way for the headliner
I'm probably gonna go to the trunk and try to figure out how this stuff comes off because again
We're gonna have to remove all this stuff anyways to get the headliner out
Hopefully in the next video be able to do the current airbags and fully assemble this room
I think it'll be so sick to get to do that this guy accepted my offers so quickly see I just got one for 30
bucks
Super happy about that now as far as the passenger side
This is obviously this side with most of the issues now getting to these seat belt controls and getting to the seat buckle might be
A little bit of pain
But I think if I shove something in there at least get the seat to move up forward a little bit
It might be a little easier actually moving these trim pieces as well probably a whole lot easier
I'm not gonna actually move this bottom piece just because I don't think I have to remove it and I'll avoid me from breaking this
Side I really don't see the reasons why I need to actually pull this out
We might have to remove it anyways to get this fixed so oh, buddy, okay?
This is gonna have to come out again. Hopefully. I don't break this side
Let's go ahead just remove all this stuff all this stuff. I'll set you guys up over there
Hopefully I break less things on the the second time
So surprisingly on the driver's side
I broke every single tab known demand on this piece and on the passenger side where the
Accident was and this piece is actually being flexed on nothing broke
I absolutely preserved every single tab on here, and I preserved every single tab on here
So actually how this works is I thought you pretty much just pull on it you apparently need to slide it upwards
So for those guys who have our super are gonna be rebuilding a Supra make sure you just slide this piece upwards if you do
Break it I found two on eBay one for 30 one for 35. I sent him an offer for 30
I got it for 30 bucks, and there's another one for 45 sure if you send an offer for 30 35
You'll get it so not too expensive there in terms of the seatbelts
I took out both of them like I said to get them both in yellow this one is blown
It looks like both sides are blown because the clips that were hanging on to both igniters are broken
So I'm hoping none of these got damaged this one looks like it's a little bit bowed out
That's a little bowed out, so I guess that's how it's supposed to be I haven't both on the ground normally
I would not put brand new seatbelts on the ground, but since we're getting it replaced who cares so now
Let me kind of like an inside scoop to the damage behind here. Nothing actually seems to be too badly buckled
I mean, I guess we can look in here as well
Yeah, like the inside wall does not seem to be affected surprisingly
I don't know if you guys can tell but the inside wall kind of like it's even throughout the entire thing
But it's just the upper wall that's been pushed in so I think think we might get lucky sorry guys
I'm like pulling random things out of here
I think we might get lucky and the upper piece might be able to just get pulled out and
All of our issues will be fixed because again look at that corner there doesn't it there is no buckles one
So let me go ahead and show you guys the other corner as well
That is exactly how it looks on the other side if you guys look in here
There's actually like two pieces like there's this wall right here, and then there's another welding piece
That's right in here throughout this entire part the other side is that this top part is like bowed inwards
But I'm pretty sure to pull it out. It's not gonna affect the structural integrity of the inside of the car that being said again
I'm not a professional. I'm gonna take it to the body shop whatever they recommend
We're gonna go ahead and get that done with I'm actually probably take it to a frame shop
This is a little too much for a body shop. Yeah, look it back over here again
It looks really really really good back here. Thank the Lord. This is how the damage is looking. It's honestly not that bad
Look what I found underneath this seat. It's got a receipt staple to it and everything
I just found myself a hot wheel in our Toyota Supra. There was a couple other junk stuff over here. Yes
Don't worry. I'm gonna wash my hands, but I mean hey we got a free hot wheel
I mean hot wheels nowadays is a rare commodity. Let me tell you I'm gonna just hop in here surprisingly guys
There's no speakers here because the speakers are all in the back. It looks so baller having speakers are behind you
I mean yeah, we don't have an engine behind us, but I mean speakers. Yo, that's some cool stuff
I see these carpets are clean enough. I'm gonna go ahead and just take a seat in here
Oh my god guys like this car. Honestly is just so nice, dude
Guys look how much lights we got on the dash right now
All we got is airbag lights in a TPMS light because our tire pressure is low
It's always saying the driver's door is open, but if it closed I mean at the driver's or the passenger door
We only have the passenger door that needs some work, but check that out guys look
How healthy that is it is really cold and I'm gonna pop a few revs real quick
As soon as this thing kind of warms up, but uh this is crazy. This is crazy
I I love this car so much guys this steering wheel from the factory feels really nice
I mean regardless. I kind of want to get an auzo wheel regardless because I want the yellow stripe there
I want yellow seatbelts. I want this thing to look super clean
I want it unique end of the day
But honestly guys this steering wheel if it fits a BMW and you're able to replace this one with a BMW horn
I would definitely retrofit this into an f30 like this steering wheel feels so nice
I don't know something about the leather or something just feels super high quality
I don't know if I showed you guys either, but this thing is a touchscreen which is super cool
So we're gonna close message there go ahead close the more message
Come on. Yes, so no no no no no no no no no no no no no no no I don't want to contact anybody go
Right over here shows MPG and everything
I think this is like the new iDrive system my phone's not connected to it
But he's supposed to show up something over here for Apple CarPlay wireless Apple CarPlay
Which is super sick, and this is the weirdest thing ever on a complete side note
This is the only piece of carbon fiber on this entire interior
We have no carbon fiber there on this is more like a gloss black
Which I just don't get why they make that in carbon fiber. This is not in carbon fiber. It's all gloss black
This is gloss black. I mean this is the only piece of carbon fiber
I mean don't get me wrong
This is some beautiful piece of carbon fiber, but I definitely think they should have added some more
I think maybe some people are gonna start selling some carbon fiber bits for this car
And I might have to cop it there is a wireless charging pad right there, which I think is super sick
I also love this ingenious thing where they put this plastic thing right over your phone
So your phone doesn't like pop up over a bump it stays in there, which is super nice
I really like that for some reason no center console
Which is kind of weird me we have a little bit of storage here two really nice cup holders
I mean, I mean, I know this is a Toyota and a BMW cup holder
So it looks like they made this real right BMW honestly the only thing you need to work on is their cup holders and another
Thing I noticed when I was reading you guys's comments
Is that when you guys said that at this car apparently because this also built with Toyota?
Not Toyota Toyota Toyota nor this is gonna take some time
What do you guys said down in the comments that Toyota basically had a set a bunch of like rules or like regulations or whatever when
They're actually building this b58 so this b50 is a little bit different than your standard m440
I'm not I'm not gonna say standard, but I mean like your typical m440 or your m340. This is actually different
I don't know what exactly is different
I don't know what they change exactly but when you guys in the comments said that they built this basically to be more reliable because
It is a Toyota
And it's also BMW and they want to uphold the super name
So let me know the guys down below what you guys think about that exactly and is that accurate?
I probably have to do some research myself, but again guys this thing is running like a butte
No lights on the dash again only the airbag lights. We'll get that sorted
Hopefully soon Toyota is gonna be calling me pretty soon
So we can actually get these curtain airbags replaced as soon as you get those replaced
So I put the whole headliner back together, and it was actually really nice since we have to remove the seatbelts
We actually cleared up the whole rear section, so we only have to focus on this front section here
And there's no sunroof so it should be really easy to take off this headliner
And then I think we just have to drill out the rivets for the airbags replace the airbags put new rivets
Should be some good stuff. Take it some time to warm up
It's still only on the first bar
I'm gonna go ahead and come back to you in a little bit once this thing's actually warmed up all right guys now the
Car is warmed up the car is in sports mode check out these burbles guys for a stock car stock exhaust
Just check this out
Well yeah guys that is gonna have to conclude this video
Hopefully I'll be able to pick up these current airbags later today or tomorrow so you can get these things installed
And then probably end up taking the seat buckles in the same video tomorrow
So hopefully tomorrow put in the airbags put in the put back on the headliner make that
Perfect and then and then drop off everything L&D solutions now that will take some time
L&D solutions to get that stuff done. It won't be like a 24-hour turnaround
I think it'll be at least like a day or two possibly three days
So once all that stuff gets done
We throw it back on this car
And then make more videos on this car probably take this down to the frame shop actually and get the damage
Diagnosis to see if we need to order an entire quarter panel
Or if we could just kind of get that repaired and then order just the outer skin or something like that
So we'll go ahead and figure that out in an upcoming video, but in the meantime guys
That's gonna have to conclude the video. We are gonna be getting our 328 e92 daily back on the channel pretty soon
We got the front bumper paint master ribbon for paint matching the side mirror caps paint match
I'm just getting it buff polished and that ceramic coated as well because it is the new daily
And I want the thing be absolutely perfect once we get that back
We have a bunch of maintenance from FCP here on a bunch of little things
I want to add to the car to make that thing perfect so we have the ultimate daily right now
I'm dealing the e92 m3 or my truck my Nissan Titan they're both v8
And that's definitely not a good way to save money because gas prices are crazy as you guys know
Especially like me living in California paying upwards of six dollars a gallon so yes without further ado guys
I love y'all so much. Thank you guys for the blessings and the opportunities that are always coming my way
Thank you guys for supporting the channel no matter what and I can't wait to bring you guys the best content possible so without further
Ado I love y'all so much remember to stay humble. I see on the next one peace out