REBUILDING A WRECKED PORSCHE GT3RS IN 24 HOURS

Ex Used Car
15 followers
36 Video Views·Feb 1, 2026
I'm about to attempt to rebuild this GT3 RS in 24 hours.
21 hours, 31 minutes, 17 hours remaining, 9 hours remaining.
But this Porsche isn't mine. It's actually owned by James.
This is going to be an interesting one. Full airbag.
This doesn't look good. This does not look good.
Or better known as MrJWW.
Some of you might know that he's attempting to do a sore but 7 minute lap of the Nordschleife.
And whilst out training for it, he had a small accident.
Now I saw this as a perfect opportunity to not only help a friend out, but to also test my ability.
We've got our first customer for the callout boys. It's MrJWW.
And look, he's brought his car fresh off the ring.
Had a bit of a moment with the wall.
And we've actually volunteered to repair it.
Because we know these cars inside out now.
And just from the photos, we've quoted 24 hours of labour and parts.
He's on his journey to do a Nürburgring lap time under 7 minutes. Is that what it is?
The plan is to do a sub 7 minute full lap.
Sub 7 minute full lap.
Now neither of us have actually seen the damage on the car yet.
We've only saw photos.
And I'm hoping we don't find any more hidden damage which is going to prevent us actually rebuilding this car.
As I'd love to be able to get this done for James in that 24 hours.
Is this door ok?
He said he went into the tyre wall around 70 miles an hour.
And I guess now, we're going to see what type of damage that causes.
All of the airbags have gone.
Airbag there.
Airbag here. Airbag there.
And because of that, I presume it doesn't start.
It doesn't start, no.
And the dash is obviously blown.
So we're going to have to re-stitch the Alcantara and leather dash.
Yeah, we can fix that.
That's all blown. The airbag going off cracked the windscreen.
It looks like he's gotten so lucky with this door.
How much were the doors Leon?
20 or 25 thousand pounds per door.
It's the first time they've ever done a carbon door on a car.
Yeah, so if you have a hit with them and you damage them, it's not going to be cheap.
Do you know if it had had the Manta kit on it, it would have been more planted and you wouldn't have scratched it.
Well, you're a Manta salesman.
Ok, so just by looking on the outside of the car, we can see all the airbags have deployed.
And there's a lot of damage to the driver's side.
But if we're thinking about repairing this in 24 hours,
we need to get the car inside to see if there's any more damage.
Doable in 24 hours do you reckon?
24 hours?
As soon as we touch this car, our 24 hours starts.
And this is 24 hours of labour, not 24 hours time.
So every time we start touching the car, the clock starts ticking down.
Are we ready?
What's our hourly rate?
Shall I press it then and tell him?
£1000 an hour, let's go.
Before we actually start repairing the GT3 RS, we need to know exactly what's damaged so we can order the right parts.
What was your first thought once you hit the wall?
Trying to think if I got Matt's number.
We've cracked the wheel nuts on the damaged side of the car.
So now we can get it in the air and inspect it underneath.
Of all of this damage, I've been thinking about this moment.
For the last 10 days.
This is the moment.
We're hoping to see no more damage.
Well, the ceramics aren't cracked.
Yes, that's good.
How's the tug?
Now on the 3 RS, there's the drag reduction system, the DRS.
The most visible one is on the rear wing.
But actually, it does open up aero on the floor as well.
And unfortunately for James, it looks like that's damaged.
Your flap opened and closed.
And you're saying you have to swap them both, do you?
No, no, we had to buy both because both of them are broken.
But they were really expensive.
It was really expensive.
But it looks like James has got lucky here.
It's not bad.
I was going the wrong direction.
This is kind of unavoidable.
So unfortunately, magnesium wheels, you can't repair them like you can a conventional alloy.
And when they've got fractures like this, they're basically written off.
So even though they roll, that is a game over magnesium.
That's right.
And these wheels ain't cheap.
Second hand, you're looking at £16,000.
Luckily, we've got a solution for that later in the video.
But actually, looking underneath the car, it's got away lighter.
As there's nothing else that I can see damaged.
Foot on the brake.
Ignition on.
Nothing.
That's because the pyro fuse goes.
And the pyro fuse cuts power to the starter motor.
And Porsche put it in a really, really annoying place.
Which we're about to show you.
Which could take a few hours of our labour.
Right, let's get it into neutral.
Should be able to push it forward.
Look at that dashboard.
When a car crashes and the airbags deploy, the ECU sends a signal to the pyro fuse to cut the power going to the starter motor.
To stop you from starting the car again.
All of you guys will know this.
And if you didn't know this, well then, now's a good time to subscribe.
To learn something new.
He's given me the naughty roach.
What's this?
So our goal is to get to that pyro fuse.
But to get to it, it requires us to get the whole dashboard out.
So we've got James on the tools.
Working away at getting the seat out.
And that's both of them out.
So this airbag is underneath all this dashboard here.
This airbag is deployed.
The two curtain airbags deployed.
But to get to this, we've got to remove the whole dashboard.
And also get this leather repaired as well.
This is a special type of glue they use around here.
So it's not too strong.
When the airbag deploys, if the glue's too strong, it won't lift up.
But when the airbag goes, this flips up.
Smashes the screen as well.
So it costs you not only an airbag, a dashboard, your pyro fuse and everything else.
It also costs you a windscreen.
Not great, but we're working through it.
In order for us to get the dashboard out, there's a lot that needs removing.
All the wiring for the dashboard is connected up on the side of the footwells.
So those plugs are disconnected.
Then I can work on getting the centre console out.
Tony, what are you doing?
Attempting to degas the car.
Because we're lifting the whole dashboard out, the heater box is going to come with it.
And the air conditioning goes to that heater box.
So before we lift that out, we need to take the gas out.
James, an hour's gone by and all that happens is the seats have come out.
How do you feel about that?
Gutted.
That's £1,000 gone.
£1,000 an hour here.
And you took one of the seats out.
Every time I'm looking at this, in my head, I'm hearing pound signs.
Not ticking noises.
I'm working as fast as I can.
And slowly, I'm able to fully dismantle that centre console.
This needs to come out first in order to get the dashboard out.
Pyro fuses behind there.
All the way behind there.
So you still can't access it.
I'm just trying to get out the radio system now.
I've just got to remove this.
And whilst I was doing that, my dad just about got all the aircon gas out.
All done.
All that's left to do is bill James for taking the gas out.
This is the price for your aircon bin.
Aircon bill.
£3,000 for aircon.
Regas.
Okay.
There's the airbag module.
Luckily on this, we can reset that with the OBD.
We don't have to actually send that off.
You've got these two bolts for the dash here.
One there, one there.
You've then got two bolts on the side.
One there, one there.
Same bolts on that side.
And Liam's just undone two bolts underneath the bonnet.
So that should be everything.
And then we need to undo the steering rack.
And it should lift all that.
But before we got onto that, we needed a plan for the body work.
Body shop's here.
Allied Automotive, we need your opinion on this roof.
What do you think?
Mine was a lot worse.
Yeah, mine was way worse.
Both sides.
Feel here.
It's going to be a fortune.
Looks expensive.
You can charge whatever you want with this plant.
Yeah, yeah.
Disruption you'll cause, change in the quarter.
You're going to be better off with better air.
Yep.
You reckon you can do it?
That's good news for all of us.
But what about the door?
Let's see how much it's actually saved.
This car has PPF.
Oh, no way.
There is no way that that saved that.
Oh my God.
No way, it's like brand new underneath.
I cannot believe that.
It literally is.
Yeah, it's fine.
I cannot believe that.
No way.
And it looks like the paint protection film has done its job.
That whole door is pretty much untouched.
Now, let's get this dashboard out.
Two bolts on one side.
Two bolts on the other.
And then my dad and Liam are working away at stripping apart all the parts we need to remove underneath the bonnet.
First off comes the strut brace.
Then the battery.
Then the need to remove the battery tray.
And remember, the car won't start without this battery tray in.
Because that module underneath it is the fuel module.
The coolant hoses and the air con are going to the heater box in the back,
which do all your heaters and your air conditioning inside.
And that's all going to come out with the dashboard because that's how you have to do it with force.
You tell me any other way, I'm going to say you're wrong.
That's the air con line disconnected.
Now it's the coolant feed and the coolant return hose.
I'm using these clamps here so we don't lose loads of coolant out of the cooling system.
Then, when we disconnect these coolant lines, we should only get a little dribble out of the heater box.
Which should save us having to bleed the system later.
Yay!
And now the dashboard's ready to come out.
Your whole dash is just coming out of the car now.
And you can see the whole thing lifts out at once.
This is so random.
So much pouring out.
That's a great view.
That is the dashboard out.
That is ludicrous, man.
Yeah.
Now have a look in here.
So where's this pyro?
There's your pyro fuse.
The pyro fuse is in there and that's what's stopping you from starting the car.
I don't make it easy, do I?
No, not at all.
There she is.
That's it.
And all that's doing there is the power from the battery goes down here onto that and allows all this body electric to power up.
But the one thing it's stopping the power going to is down this wire here which goes directly to your starter motor.
And that's why it won't start.
So if you took that off and moved that onto the other side it would start.
I have no idea why Porsche put the pyro fuse in this location.
As when all the airbags do deploy, this adds a bunch of labour to the cost of getting the car back on the road.
And on top of the airbags deploying, the seatbelts will also lock out.
That's another part that we need to remove.
Right, next step.
We have got the seatbelts.
Where are the seatbelts?
The seatbelts which are here, they're completely locked out.
So they're going to need to be sent off and reset because these lock out in an accident to hold you back into the seat even though they weren't wearing them, they were wearing harnesses.
To get these out, we've got to take the roll cage out so we can get all these panels off.
And on top of that, we might as well get these curtain airbags off which go down and sit behind the rear door card.
So let's start removing all of that.
First out is the roll cage.
Cage out.
Now I can start removing all the trims and the rear door cards so I can access the seatbelts.
Seatbelts are out.
Now we go into the seatbelt lady.
Seatbelt lady.
24 hours please.
I'm not, I'm a magician.
The seatbelts are going to be sent off to the airbag team to have the explosives reset on them.
Now, we've got to lower the roof lining down so we can access the curtain airbags to remove them.
There's three 10mm nuts at the back holding the actual explosive canister to the chassis of the car.
And then the rest of the airbag is held in with clips along the A pillar.
I'm removing one side and my dad's removing the other.
That's the airbags and the seatbelts removed.
This car is stripped.
Right, what we're going to do is get this top half of the dashboard off because this piece needs to be repaired.
This lever on the dashboard.
And re-stitch and fix.
And then we can put the new airbag in from underneath.
But if we're going to have any hope in doing this in 24 hours, we want to get it off now.
So then when we get it back, all the parts should arrive.
Because 24 hours label, we're going to pause it whilst we're waiting for parts.
But let's remember how all this came out.
And I think I do remember, it's quite fresh on my mind.
Now this is something if Porsche were repairing the car, wouldn't be able to do.
They would have to replace the dashboard as a whole.
Which would one, add massively to the cost of the repair.
But also add to the time taken to repair it.
Because each one of these dashes have custom stitching in.
Depending on how the customer specced the car.
So, lucky for us, we're not Porsche.
And we're not going to be wasteful.
We can actually repair this dashboard.
Back to a state which is as good as, and as safe as new.
Using the original type of glue which holds down the compartment which holds the airbag in it.
And the original style stitching.
But to get the fabric part of the dash off, I've got to remove all the trims surrounding it.
Like the instrument cluster, the clocks on the top, the glove box underneath.
All of this has got to come off.
And to be honest, this probably would have been easier to do inside the car.
But we're here now.
Finally, I'm undoing the bolts which hold the passenger side airbag to the underneath of the dashboard.
Once they're undone, I can slide the airbag out.
And there's three connectors on it.
Got to disconnect all those connectors.
And finally, remove the airbag.
It's not repairable.
Hi, James.
And now, that's the fabric part of the dashboard away from the frame of it.
Just got to get that sent off for repair now.
19 hours, 40 minutes remaining.
Next step.
Now that the dash is out, we've still got to get all the damaged parts off.
The body shop want the rear bumper off to repair it.
And they want to access the rear quarter by having the rear bumper off.
So we're going to get the rear bumper off because that's a big job.
And whilst they're doing that, I'm going to take this wing off, headlight out and the front bumper off.
And that is all the damaged parts off.
We should be able to get a good indication of what parts we need.
That also needs to come out.
Let's go.
Let's get this car back in the two-post ramp.
And start removing the rest of the damaged parts.
My dad's removed the diffuser.
And now Liam is working away at getting the rear bumper off.
Whilst I'm at the front, working on the front bumper.
Anything damaged is coming off the car, being noted down, so we can make sure we can order a new one.
James wants his car as original as possible.
So all the parts that we're going to be ordering are going to be from Porsche.
It's going to be interesting to see the repair bill at the end.
Hey, after about half an hour, Matthew, this lot, we've got it out.
It's dropped.
You're literally sweating.
It's been crazy.
The final piece is coming out, Matthew.
Look at that.
That is now ready for the body shop, isn't it?
As long as the bumper's coming off.
The rear quarter is now stripped, which is going to help the body shop out a lot,
when they try and push and pull those dents out of the quarter.
And I'm undoing the bolts which hold the front bumper in place.
And I'm going to work out what's salvageable off it, and what isn't.
This off, lights out, bumper off.
Done.
We've taken apart these GT3 RSs plenty of times.
So we know exactly how to get this bumper off.
And we're doing pretty good on time.
And now I'm on the final bolts to undo the wing, which are just behind the front door.
And once that's out, we can disconnect a few of the wires.
And that is most of the damaged parts off.
Six hours in, and we've done a full strip down.
Everything that needs to be stripped down, is stripped down.
And off. All the damaged parts are off, bar the wing mirror.
Not bad.
So this car now is going to go to the body shop,
because the body shop have got the biggest amount of work to do on it.
So whilst we wait for the dashboard to be fixed and everything like that,
we might as well replace this power fuse, so we can actually put the dashboard back in place.
So, this is the only reason why the whole dashboard had to be removed.
Else we could have just took that leather top off, with the dashboard in place.
But, when these must.
Out comes that one, which should be broken.
And, here's our new one, £15 off eBay.
Before the new one goes in, I want to actually make sure it's not broken,
because if we have to pull this whole dash out again because of that, big problem.
Okay, so that makes a connection.
It should have that same sound when we do this.
Good news.
This is another thing that Porsche wouldn't have been able to do if they repaired the car.
If they don't sell the power fuse separately, they would have had to replace the whole fuse board.
Which again, adds more cost to the parts list.
But with that power fuse in place, I now can start lifting the dashboard back in.
Here we go.
I already know I can lift all the fabric and the airbags into the dashboard without having the full frame out of it.
So, I might as well put the frame back in the car and connect up all the bolts whilst I can.
Being as efficient as possible.
So, that's pretty much what a dashboard looks like without all the instruments on it and the leather top.
We're connecting back up the coolant lines and the aircon lines at the back,
so that when we get the car back from the body shop, we don't have to waste time connecting all this back up.
I also need to remove the door card on the right hand side.
And that's because I need to remove the damaged wing mirror.
Once the door cards are removed, I can access the bolt to get it out.
And that's job done.
That is ready to go to the body shop.
Off it goes.
Now, we didn't actually have the timer on for the body shop's work.
But I'm sure they'll give us a bill at the end of it of how long they actually spent getting out all the dents and painting the 3RS.
And the way they got the dents out was like this.
Most of this car is made out of aluminium, which is really flexible.
The body shop were able to pull it and work it back into its original position.
But they have to be super careful not to pull it too much, because as soft as aluminium is, it can break.
But with plenty of time pulling, pushing and hammering, we finally get the quarter into a spot they can work with it.
They then start sanding it so they can work out where the high spots and the low spots are.
And after that, it's time for a coat of high build primer.
And already, it's looking so much better.
Again, if Porsche were repairing this car, I would guess that probably they wouldn't be able to do this type of repair.
They'd maybe just quote for a complete rear quarter, which again, adds to the labour cost and the parts cost.
Before it goes into paint, we need to remove the damaged windscreen, cover up half the car that we don't want painting and we're ready to go.
On goes the first layer of the orange.
This is what Porsche call a paint to sample colour, which I believe you pay extra for.
Luckily, the body shop can mix up that exact colour.
And to make sure it all looks nice and clean, they're painting the quarter and blending it into the door.
And we're going to need a new front wing and a new bumper as well.
So pretty much the whole of the right side of the car is going to be resprayed, but that will really help with the final finish.
Just the clear coat going on now.
And the body shop have completed their work.
Back to us.
Here she comes!
Now we're not going to restart the clock until we start work on the car and I don't think that counts as pushing it.
That does not count as work.
Oh yes, it's looking brand new.
Smell the paint.
Oh yeah, the paint is so fresh we can smell it.
Oh, look at the quarter.
What a job, boys.
Now, it's time for the build up.
Everything damaged is off the car.
It's time to make it complete again.
Over 17 hours remain.
The clock is not ticking down because we're not working on the car just yet, but I'm about to.
The dashboard has been fixed by Auto Trim.
All this has been repaired, re-levered and actually re-glued with the special glue that you need for the airbag to deploy again and for it all to be safe.
So that is all repaired and good and ready to go in there.
All we need to do is install the airbag to the bottom of the dashboard when we do that.
We can't forget that or else we'll have an airbag right at the dash and we'll have no airbags in the car.
So here's all the airbags.
I think we've got steering wheel, passenger airbag and two curtain airbags.
My next step, I think, I'm going to build up the whole interior just to make sure this car actually starts because we've never had it started since it's been here.
And now we'll replace the pyro fuse.
Then at least we can drive it, move it around and then we can begin building up the exterior.
Just under 18 hours left.
We're doing good.
I think we're doing not too bad at all.
Let's get this dash in.
The frame of the dashboard is already in so we've just got to lift the lever onto the top of it and bolt it all together.
Making sure that all the cables and things like speakers route the correct way underneath it.
There it is.
One new explosive.
The next job is the passenger side airbag.
The reason we had to get the dashboard repaired.
This bolts in from underneath.
Four bolts which hold it to it and two bolts which hold it to the frame of the car.
Then there's three electrical connectors that we've got to plug onto it.
After that we can move on to things like the speakers.
This is really time consuming work but it's got to be done.
Everything goes into this dashboard in a certain order.
Sometimes you find yourself putting one thing in to having to take it back out again.
All the top half of the dash is in.
Airbags in. Glovebox in. Cup holder back in.
Screens back in.
Liam's just de-wiring the race logic lap timer thing because James wanted to take that out for now.
We've still got this centre console to go back in.
That's all wired up and connected.
I've just got to put that up there, bolt that in.
All the trims have got to go in.
There's also the steering column.
I've got to connect that all underneath.
But we're nearly there.
Then we've still got the centre console and the rest of the back of this interior which we're getting there.
But it's bit by bit.
Hopefully we'll get the first start up since the crash after this because hopefully that pyro fuse works.
Me and Liam continue to put together this dashboard.
Trim by trim.
We've finally got there.
The seatbelts have come back from the airbag team.
Let's start installing.
The seatbelt explosive have been reset and now we can refit them back into the car.
This is perfect because they're the OEM belts so it looks as if nothing's changed.
Next up, the curtain airbags.
Bolting to the actual chassis of the car and clipping in along the A-pillars.
Electrical plug goes in.
Tighten it all down.
And that's job done.
We should have thought about this logic there.
Because he's going to go back on track and use it as a track car we shouldn't just not put any airbags in.
Because if he deploys again it's going to be a nightmare.
We should have made it a pure track car.
No pyro fuse so just straight past the pyro fuse so if he does crash it again it doesn't deploy.
No airbags, pure race car and take out anything, any weight that he didn't need.
So no airbags, no roof lining, no carpets.
But then that would be bad for business for us.
No because we're still charged to take them out and you're charged actually more.
You know I had like the Superleggera and like the SVJ where they just take out more stuff and charge more.
Okay yeah we'll do that then.
So you just take out everything and charge more.
Because you've made it lighter.
We're too deep into it now to be thinking about making this a genuine race car.
16 hours remaining.
Next up, the new windscreen.
£1500 for a brand new screen from Porsche.
The adhesives laid on and now we can pop it into place.
And it's not only the windscreen that's broken.
Both rear quarter screens were broke.
And these were broken by the curtain airbags.
They released so much force that it pushed these quarter glasses out.
And this glass is really fragile.
It's super lightweight so any sort of pressure on it just cracks it.
So I've got to be really careful when fitting them.
But once the quarter glass is in place I can go back inside and start fitting the rear quarter trims in place.
Which now leaves me with a centre console that I've got to put in.
Again, all of this stuff only goes in one way.
But because I've done a few of these now I'm getting pretty fast at doing it.
That is the centre console in.
The dashboard in.
We're missing the airbag at the minute.
We've got to put that in.
I've still got all of this roof lining to put in.
The roll cage, the seats.
But we're working through it.
It feels like very, very slow progress on my own.
But I do seem to be making progress.
Which is good progress.
What are we looking at for time?
15 hours and 10 minutes remaining.
Reasonable. Reasonable.
Let's get the rest of the interior in place.
The rear carpet can go in.
And you'll notice the rear screen was actually removed to paint the car as well.
So that's something else that we've got to put back in.
Then all the seat belt trims can go in.
A lot of this stuff is all on clips.
And then it's the window trims.
And once the window trims are in place we can put the door seal back in.
Before moving on to the steering wheel.
I've got to take the steering wheel off.
I've took a picture on my phone to make sure I put it back in the exact location.
And I've got to take it off to repair some buttons.
Here are the buttons missing.
PASM and Porsche.
I don't think I ever sussed out what this button does.
But it's meant to go in there and the airbag blew it right off.
So that's going to fit there.
The other one's just completely snapped off.
So we can fit them.
Then we need to order this wiring for the airbag.
And we can install it all back on.
But the car should start without that airbag in.
We'll just have an airbag light.
The pyro fuse goes.
Then we're an idiot.
That PTV button actually stands for Porsche Torque Vectoring.
And you can actually adjust the way the differential works.
And the stability control with that button.
Can't say I've used it a lot in my one.
The steering wheel, the wheels are in a straight line.
We know that it's in a straight line.
So now we've just got to go underneath here.
And then connect the steering column up to that steering rack.
Yeah, I'm on again. Good, good.
Once that's all tightened up.
Liam's going to put back in the battery tray with the fuel module.
Right, battery. Go in.
And the battery goes in.
And this little platform for a toolbox.
Do you reckon James is going to pay the bill?
I don't think so.
If he doesn't pay, we'll take it away.
Yeah, if he can't pay, we'll take it away.
We're coming up to 10 hours labour on it.
Which is what, like 30 grand?
Yeah, about 30 grand.
It's getting expensive for him.
Now we can put back in the strut bar.
Which is a good indication to know if your chassis has moved or bent.
As this bar will probably have a big kink in it if it was.
But we're all good here.
Wonder if they work.
Doesn't matter anyway, because we don't know whether they will work or they won't work.
Because we don't know what they do.
Don't want that coming off.
Is it going to start?
Ready?
I've not heard a Porsche do that before.
Has it got no fuel?
Okay, just had a moment, he had a moment.
Yeah!
I think we've got a few lights on.
So we've got, I don't know why it's saying transmission fault.
Possibly no reverse gear.
That's worrying me because that were plugged in all under here.
So I don't know whether I've unplugged it or not done something right.
I guess we've got to read the codes, possibly got to cancel them.
We've got engine management light.
But I think that is on because we don't have the cooling temperature sensor plugged in.
We've got adaptive air fault, which I think is the DRS on the front.
And that's it.
Good news.
14 hours remaining.
Let's get on to the next job.
His towing eye here is actually snapped in.
It's snapped into the thread.
So if we can get that out, that would be good.
And we can just reuse this crash bar because the crash bar is completely fine.
But it needs a towing eye to be able to go on track so it can get pulled out of the gravel if he goes in there again.
Which he might.
So I'm going to start by removing the crash bar to see if I can access the snapped off tow eye from the other side.
And my dad's going to start rebuilding the rear end of the car.
I couldn't get to it through the back.
So it looks like we're drilling it out.
Now I've got a self-tapping screw.
I'm going to try and screw the self-tapping screw into it.
And because this is opposite thread, when I'm turning this right, it should start pulling it out.
All of this is taking precious time.
But I got the self-tapping screw into the broken tow hook and it was only moving a little bit.
Meanwhile, my dad was putting in the air intake in the back and then some of the arch lining.
We're going to try and just completely drill all of this out.
It looks like it's coming out, guys.
Oh, yes. Go on, Liam.
Go on, Liam.
Oh, look at that.
That saved James loads of money.
Should we tell him that it took longer to do it as well so we get the labour?
Yeah, so we'll just say it's a new one.
Yeah.
Also, another thing that's happened is the rear screen.
So you might notice the rear screen is out.
Now, when it went to paint, we wanted to get the rear screen out.
But whilst the rear screen was being removed, we know how fragile they are, it made a little crack in it.
Can't get round it.
So we're going to have to order a new rear screen.
But look at that. Our labour cost is so high, it's covered the rear screen.
We're only joking, James.
But the parts list is adding up.
Next thing I've got to remove is this front undertray.
Because that's broken and needs to be replaced as well.
Here we go. Here's the new undertray bit, which is actually pretty vital because it's part of all the aero and everything that holds on.
I've just realised that it doesn't come with these.
They've scammed us.
So I've got to transfer all these over first.
Once the said clips are transferred, I can now fit the front undertray.
And I've got to remove this broken part of the floor DRS system as well.
And start fitting the new one in place.
While the young lads are doing the front, it's up to the old boy to do the back.
First things, build the bumper up and then put it on.
This car is just like a giant piece of Lego.
Loads of different pieces all added together to make one GT3 RS.
There's obviously one on this side.
But we're waiting delivery on it.
You'll be able to watch that later in the video.
How exciting!
Meanwhile, I was finishing off putting that front DRS in.
So this is DRS and because there's a lot of air going through that, that's the goal, to get air through it as fast as possible.
It creates a vacuum. That vacuum sucks everything down.
So it needs more support, which is why they've got these tethers.
Now the tethers should hold on to there.
But this is a little bit too short.
But we should.
That's good, isn't it?
Where's the bolt for it?
Back at the back end of the car, my dad was ready to put the rear bumper on.
Look at that, didn't even need any bolts.
And now I can put the bolt in for the tethers which hold the front DRS.
Whilst Liam starts taking apart anything that was actually usable off the old DRS system, which wasn't much.
You can see we're putting in the motor which opens and closes it here.
And then after that, there's a position sensor which goes in.
And that tells the car which position the DRS flap is in.
And they've got to communicate together.
My dad's just finishing off putting the final bolts in for the rear bumper.
And now I've got some more air guides just to put in, which guide air into the DRS and into the front radiator system.
And we're all good on the front end now.
So we learnt this from the Porsche nerds who come and did the man-tie kit on the Porsche.
See these tethers here?
Look, they're loose.
They are loose, like that.
So if you push them down, then this slides across and that goes tight.
If you push it up, then that slides up.
So to get a nice bit of tension on it, I just kind of like push it up a tiny bit.
And then tighten it up.
And now that is nice and tight like the rest of them.
Next step.
What's next step?
The rear lights was the next step.
Two on the side and one long boomerang one in the middle.
My dad slid all them into place, tightened them down.
Then the ducktail spoiler can go on.
Then it's down to me to build up this front wing, or fender if you're American.
I take it off the car, fit the petrol filler cap and the mechanism to it.
And along with that, there's also bits of aero which sort of slides and clips into place underneath it.
The wing is built up and complete.
All the aero's on it.
It's looking sensationally orange, like a tangerine.
What's the difference between an orange and a tangerine?
One's big, one's small.
I think.
So what's this then?
Neither.
Liam's putting in the bolts for the wing.
And of course, time is still ticking down.
The hard thing about all of this is getting it lined up perfectly.
Looks pretty good that.
Just want to see the other side.
Yeah, looks good doesn't it?
Once I'm happy with the wing to the door alignment, I can put in the lower half of the wing.
And the wing to bonnet alignment I'll do later.
Yes, my next job would be dismantle the front bumper.
Liam, do you want to take part in the next job?
I'll take part in this.
Come on then Liam, you've got to put enthusiasm in it.
Come on.
I'm going to take apart this side with you Tony.
So those two started stripping apart the old bumper and getting all the damaged parts off it.
Right, let's see if that works.
What do you reckon?
That's pretty good.
And I got pretty lucky with the bonnet alignment.
Yay!
Here's one headlight looking a little bit sorry for itself.
These headlights aren't the LED matrix, all singing, all jazzy headlights which you'd have to spec from new.
I don't exactly know the difference in between, I just know they were cheaper.
You know what Porsche people are like, they know if you bought cheaper headlights.
They're like, oh look, he's got the cheap headlights.
But lucky for James, these headlights are the ones that were specced with the car and are cheaper to replace.
I've just got to remove this module here, which is the actual part which powers the headlight up.
And we shouldn't need to code the headlights of the car because we're using the same xenon part here.
Now it's time for the new bumper.
Look at that.
Something we couldn't get away with not replacing was that front bumper.
But there's loads of other parts which builds it up.
So my dad and Liam are on with doing that.
11 hours left.
Slide the new headlight in place.
Bolt it in with the two bolts.
Guide the wire in where it's meant to go.
Clip the connector in place.
Then have your fingers crossed that it all works.
Yeah!
It is working!
Yep.
We're good?
Yep.
Yeah boy!
And whilst I've done that, Liam and my dad are still building up that front bumper.
But they're almost there.
So I jumped back onto the rear end of the car, slid the diffuser in place, put all the bolts in for it and called it a day there.
Look at that.
Two hours this took.
It's up. It's ready to go on.
Nine hours remaining.
Let's get this on.
Hopefully we should be towards the final stages here.
Now we're hoping that James sort of changes his mind about crash damaged cars after this.
Because he'll drive it and think it drives exactly the same as it was before it was even crash damaged.
But if you're a little wary about crash damaged cars, there's a place you can go to check out whether your car was damaged.
Just to make sure you're not buying a crash damaged car and that it's car vertical.
All you've got to do is put a registration plate in or a VIN number in.
Works in over 20 different countries and it will tell you if your car was ever previously damaged.
Whether it has had any mileage fraud on it, whether it was even stolen.
And it will give you a full timeline of the whole car.
Have you car vertical checked your car?
No, Matt did.
Can you tell us another fact about car vertical?
There are pictures or sometimes are pictures of the accident damage that's happened to the vehicle.
These things hold the bumper in.
Sort of like slide in if I remember right.
Yep, that's in.
That's in.
Bumper held on, we just need to put some bolts in and the front splitter.
And remember, after this video, if you haven't already checked your car out on car vertical, then you need to be doing it.
And the link is in the top of the description box below.
So you can click on it, use my discount code to get a discount on that check.
To make sure your car isn't crash damaged or the car you're about to buy.
Let's put this front splitter on.
The front splitter just slides into the bumper and then it's bolted from underneath.
And once the splitter's on, the bumper's complete.
Now Liam and my dad have started to put in the wiper cowling.
We'll start putting all the trims that should be underneath the bonnet.
Luckily for James, none of these actually got damaged in the accident.
And they just slide in and then clip down into place.
Next up, the wiper blades.
Tighten them down, making sure they're in the right place.
And that's job done there.
It's starting to come together now.
We've got the new rear spat.
Guess which is the new one?
You're right.
And I've got the new front arch lining.
With all the stickers on, we'll keep it on like rappers do with the hats.
All of the spats and the splitters on the bottom of the car are made out of plastic.
Porsche apparently did this because if you are going to get in an accident,
or things get scuffed and chipped,
it's mainly going to be the plastic parts that it's going to happen to,
which keeps the costs down when you go to replace them.
Although, they are still pretty expensive.
This is probably one of the reasons why this repair,
like actually genuine, people will be thinking this is a mental figure,
but this repair would have been close to £200,000 to do on Porsche.
And one of them will be because of these magnesium wheels.
This is damaged and Porsche won't replace just one wheel.
You've got to buy them all four wheels.
Same as if a brake disc has got a chip in it.
You're replacing all four of them.
So this would be part of the reason which adds a ridiculous amount of money onto the repair bill.
Luckily, we've got a solution for this wheel
that's going to hopefully turn up before the 24 hour ends.
That one's on.
Wallop.
Okay, it's looking good. It's looking good.
Next step now, build up this steering wheel.
And I think this is the reason why we've got a transmission fault
coming on the dash saying possibly no reverse gear.
I'm hoping I've plugged everything in the centre console,
but what I think is coming up with that is because
there's no wiring in here for the flappy paddles.
So maybe that's why it's giving the transmission fault.
I can only hope that plugging in all the wiring for it,
which we've now got, will solve that,
which is over here.
So I'll plug all this in.
My daddy's going to build up this wing mirror
because some of the clips are broken on there.
So we've had new wing mirror bottom and this all replaced.
So we've got a fresh wing mirror and a wing mirror cap.
Let's continue.
At the minute, none of the buttons work on the steering wheel.
And that's because it doesn't have this wiring.
This wiring plugs into the clock spring,
which sort of works like a gyro on a BMX bike
and then transfers the power to all the buttons of the steering wheel.
No transmission fault anymore.
Aerodynamics fault.
Tech tyres.
And airbag fault because we've not got the airbag in.
So my theory was correct,
that if that wasn't plugged in,
you'd get a transmission fault.
So next step,
plug the airbag in.
We should be able to get rid of the airbag fault.
And then we should, after that,
plug in and get rid of the aerodynamics fault
because that needs calibrating because it's a new DRS on the floor.
I think I know how to do that.
But dad's still building up the mirror.
I'll build up this. Let's go.
And whilst my dad was tearing apart a mirror
to fit the new mirror caps which don't have broken clips on it,
I was getting the airbag.
Here's the airbag. Brand new.
And it comes with
funky foam.
Once it's disconnected,
I plug the airbag in
and then it just pushes into the steering wheel and clips in.
My dad's completed the mirror.
We're coming up to six and a half hours left
and I can slide the mirror into the door.
I had to remove the speaker
so I could grab the wiring for the mirror
and pull it down through the door,
making sure it goes around the window regulator.
The last thing we want is when we put the window up,
it to catch on the wiring for the mirror.
Once the mirror's plugged in,
I can then slide in the one bolt
which holds it to the door.
Alright, no rush.
Then finally, we can add the door card.
There's two plugs on it.
There's then the cable which opens the door
and then we can push down the door card into place
and tighten up all the bolts to hold it on.
Tell me if it goes good.
We just need to make sure that the window is properly aligned now.
Six hours remain.
On goes on the side skirt.
It does have a few scuffs on it
but we chose to reuse it to keep the cost down.
We're going to put this little
side aero indicator
flappy thing on.
This has a wire going to it
because it has the indicator in there.
Liam's got to slide it through
and I've got to somehow grab it on the other side
and plug it in.
We end up having to lift the door up anyway
because there's another trim that needed to go in there.
Next job,
rear screen.
There's only one person
important enough to do that
and he ain't here.
Here's the new rear screen.
We had to replace this because it broke
when lifting the old one out.
My dad's got to put primer on the screen
and on the body of the car
and once the primer's in place
it can then apply the adhesive.
We can now lift the screen up
which is super lightweight and really flimsy.
We've got to be really careful with it.
Slide it down into place
and put the tape on to hold it down.
Four hours, 52 remaining.
Now the final trims can go on the back of the car
these are the covers for the coolant fill
and the oil fill
and I can go inside the car
and connect the connections up
for the rear screen heater.
Once they're in I can start
re-putting in all the trims on the interior.
That's in.
Roll cage next.
The carbon fibre roll cage
can now go back in.
Four bolts at the back which hold it in place
and then another four at the front.
The roll cage.
With the roll cage in
the driver's side seat
connects up the electrical connections on the bottom
and do the same with the driver's side seat as well.
Three hours, 48 minutes remaining.
Check this out.
All the seats
are in.
Lovely stuff.
The only light on the dashboard now
is aerodynamic fault.
You can see that there
and that is because
we've installed
this at the bottom
and I hope, I hope this works.
So, the fault is
engine aerodynamic flap
on right, not reference.
So the rear spoiler warning message
in the instrument cluster is requested.
Now I've got to work out
how I did this on mine.
Aerodynamic flap referencing.
Right, let's
reference our flaps.
Ready?
Does that work?
Flaps are referencing.
Routine succeeded.
You press it and I'll go down here.
Go on then.
Yeah, that's definitely moving.
Close the door
and we've got a light on the dash.
Fuel.
Tyres.
Nothing else, baby.
Let's start it up and just check.
Yes, look at that.
An empty dash.
Only thing we've got
is fuel
and it needs tyre pressures
and we're about to solve
one of those things.
These wheels
are cooked.
There's no saving them.
At least two of them anyway.
Look at this.
Oh my days.
No.
Do you want them this colour?
He wanted them the same colour as OEM
but we made the executive decision
to go for that.
They do look good.
Yeah, they do look good.
These are mad.
So these are from Wheel Mania
and they are
Vossen
collaborated with Champion Porsche.
Is that right?
Yes, Vossen and Champion RS7 four wheels.
Champion Porsche, they're our boys in Miami
and we went there.
These look really good.
So if James don't want them
I could always swap them out.
Wheel Mania have come through.
Look at the width on them.
Are these all OEM?
13x21 rear and 10x20 on the front.
So matching OEM, yes.
Same as OEM, they just look cooler.
These wheels are going to add
a little bit of spice
to James' GT3 RS
and there's only one place
we could have got them from.
Wheel Mania of course.
We've just got to hope
one, it looks good
and two, James likes them.
I'm not going to show you
a full car just yet.
We're nearly done
but if you want to grab some wheels
from Wheel Mania
also a massive thanks to
Champion Porsche and Vossen
for these wheels hooking up with James
because this car looks wicked now.
You can go grab some wheels
with the link in the description
from Wheel Mania.
That is banging.
We've got the last few final touches
to do now before James comes.
Let's see the full car.
Let's go.
James is here
after our 24 hours of labour.
I'm nervous.
Are you ready to see it?
I'm nervous for you to see it
because it's actually gone well.
I'm most excited to show you the wheels.
I'm most excited to show you the wheels
because I've seen them
and I was like does James know about it
and I don't know if you do
but they do look really, really good.
Do they look cool?
They look really, really good.
Let's just put it this way.
It wasn't spec'd like that.
No, no, no.
Okay, are we ready?
Liam, are we going to pull it off?
Come on.
Here we go.
No way.
It's like box fresh.
What the hell?
The wheels work.
I cannot believe that.
What a transformation
this GT3 RS has been through
in such a short period of time.
What some would have declared a write-off,
we gave it a new life.
Bro, I can't believe you pulled that off.
That's absolutely bonkers.
It looks amazing, doesn't it?
That's ridiculous.
So we haven't put the GT3 RS sticker
on the steering wheel.
It's on the other side
because on that side
it's over the top of the PPF.
So whoever PPF'd it
must have took it off,
PPF'd it and then put a new one back on.
It is brand new.
It's literally looking brand new.
That is ludicrous.
That's so daft.
It's mad, isn't it?
Yeah, the keys inside.
The last time I was here
I was carrying the other side
of that dashboard out of the car
and I was thinking
there's no way this is going back together again.
It looks really good.
Unbelievable.
So we've got the parts list on my phone.
Parts including body shop,
including dashboard repair,
including the trailer.
Comes to...
How much do you think it is?
Parts...
4, 3, 0, 6, 1
and 9p.
That's including that as well.
We still have
2 hours and 56 minutes
so we're willing to do a discount.
That's like...
I don't know.
What?
But we are willing to.
We've got mates and family friends
so we're willing to discount that
at a total price of
£43,061.
In 24 hours we've actually
managed to rebuild a car this time.
Go subscribe to James
because he's now about to go and drive it, hopefully.
Thanks so much for watching this video.
If you enjoyed it, hit the subscribe button,
hit that thumbs up button
and I'll see you in the next video.
Peace out.
The glass.
Wait.
I know who should fit this.
I know who should fit.
