-How Easily To Tailor A Jacket _ Make It Look

Anthony Rivera
67 followers
4 Video Views·Dec 1, 2022
I feel like he's like watching me right now.
Now there's two things that I hate,
long intros and how this jacket looks on me.
I'm SD and luckily I've got control
over both of those things.
Let's do this.
Man, this jacket, it looks and feels so much better
in every way possible, but how did we even get here?
I've got my jacket pinned up exactly where I want it to be.
These pins on the side right here,
these come in to one and one quarter of an inch.
And the pins that I have on my sleeve,
these come in to one inch.
And when I get down to the cuff down here,
this last pin right here,
this is actually about three quarters of an inch
because I want to make sure that I taper this seam
out to the cuff perfectly.
If I don't do that, if I make way too drastic of a cut
and then kind of come into the cuff like that,
what's going to happen is I'm going to flip this jacket
right side in and it's going to look stupid.
It's going to look ridiculous.
Don't do it.
I've done it.
And I am using sewing pins.
Yes, you can use safety pins if you want to,
but you need to replace them with sewing pins.
You need to replace them because it's next to impossible,
if not 100% impossible to take out a safety pin
when you are actually tailoring this thing
on a sewing machine.
Just don't do it.
I've, I've done it.
It's not worth it.
Now we, we have a huge, massive problem with this jacket.
That like 90% of you are not going to run into,
but for the 10% of you that will, this is for you.
And it has to do with this, this pocket right here.
I had to take so much off of this jacket
that this new seam is going to come right up close
to our pocket, which means that this pocket,
it's going to shift to the outside a little bit.
110% of the time, nobody will notice it
unless you point it out to them.
Works fine.
Like it's not a big deal at all.
But that being said, you're going to notice it.
You're going to be aware of it.
Not a big deal at all.
I mean, for a $4 jacket at Target, oh well.
And now, now it's, now it's time to sew this bad boy, right?
No, no, not yet.
We got to do the flex test first.
Oh, what's that?
Hey SD, I don't know what the flex test is.
Now you can't just measure and pin something
and then just stand there like a goon and be like,
yup, it fits.
I like it.
No, don't do that.
You got to get out there and bend and move and stretch
and do things in that jacket that you would normally do
to see if you actually like the fit.
Now, now does this jacket pass the flex test?
Let's see.
Hey, look at that.
It passed.
Pretty surprising for a $4 jacket, huh?
Now we got to flip it inside out.
We got to put our pins back in there
and now we're actually going to sew it.
So what kind of needle are we going to use?
Oh, you're going to use a denim needle.
Why?
Because despite the fact that this jacket
isn't technically denim, it's really thick.
So it's going to be able to like, you know,
go just fine.
So what kind of thread are we going to use?
Oh, you're going to use a polyester thread.
Why?
Because despite the fact that like cotton thread
might be more comfortable in this,
it's not going to be able to move and bend
and stretch with you like polyester thread would.
Good job.
Let's do this.
Okay, so we've got our machine all set up
the way that we need it to be.
We've got our stitch tension adjusted.
We're just going to do a normal straight stitch.
We've got our machine adjusted to that.
So let's, let's do that.
We're going to start by locking in our stitch
by making a back stitch.
And now we're going to sew like we normally do,
but just go as slow as you need to
because this is a thicker material
and your machine might not be up to it.
And if it's not, it's, it's going to let you know.
It's going to start going like,
gah, gah, gah, gah, gah, gah.
Not really that bad, but you get the idea.
So start off slow and then just kind of
work your way into it.
And we're going right next to these pockets right here.
I even could have taken in maybe about two inches
on the side here.
So let's say I were to go back and try it on
and I'm still not really that happy with the fit.
Let's say I could have, you know,
made it a little bit more slim or more tight.
I know that I've got another three quarters of an inch
to work with on this side if I need to.
Oh, no, it happened.
This happens sometimes.
My thread broke, is what it is.
You're going to run into issues like that.
There's some certain reasons as to why that could happen.
There's like three main reasons.
One of the biggest ones being that
you're not using the right needle with the right thread,
which in this case it's okay, but is what it is.
Let's just keep going.
Actually, the reason why it happened this time
is because there's a little notch on your thread here
that holds your thread in place.
And it ended up getting caught on that notch right there,
which that's never happened before.
That has never happened in the like 100 things
that I've tailored, but is what it is.
You live and you learn and you move on.
If your thread ends up breaking,
the only thing you do is just pick up
right where you left off.
Line your machine up around where it broke off
and then just kind of start over like you're doing
or like you would at the beginning.
So we're going to start off by giving it a backstitch,
go back a few, and then just go forward
like it never happened.
Boom, capiche!
Okay, you can play outside with them.
You have 15 minutes, okay?
All right, what?
Go out the front door.
What?
Okay, fine, go ahead.
So we're at the seam that runs right underneath our armpit
and these seams are kind of thick
so they can be tough to go over.
So you want to go really slow.
And what you can actually do,
if your presser foot has a hard time going over it,
you can just lift it up just like this
and keep going real slow.
And then as soon as you're over it,
push it back down again.
And now we're going to go straight through to the arm here.
And now we're getting to this last pin that's on our sleeve.
And this is the pin that we want to make sure
that we taper out all the way back to the cuff.
Because, well, if we don't do that,
then it's going to have a stupid looking dimple
and it's just going to be dumb.
So what I'm going to do
is I'm actually going to take this pin out right now
instead of waiting,
and I'm going to just kind of eyeball it.
Once you get this down,
you'll get used to kind of eyeballing things
and you'll have a pretty good knowledge
as to whether or not you're doing it right
or you're doing it wrong.
So we're just going to taper all the way out here.
And now we just do the exact same thing to the other side.
Right there is what we are left with.
So what we did is we just put a new straight stitch
right on this guy.
So this is our old one, obviously.
This is our old seam.
And our new seam runs right along right here.
And I ended up kind of tapering in a little bit.
It's going to be okay.
It's not going to be a huge deal,
but it goes in by about a 16th of an inch here
as opposed to down here.
Not a big deal at all.
It happens sometimes.
You would never in a million years notice it
if I didn't point it out to you.
Now, this is right here.
This is where our thread ended up breaking.
And people will a lot of times panic when that happens.
They're like, oh my gosh, what did I do?
I completely ruined it.
No, like I said,
you just have to kind of start up here
like you did down here.
This, you don't even really notice it.
You can see the backstitching a little bit,
but that's about it.
And we went up and we tapered.
Excuse me, we didn't taper.
We just kept sewing all the way through,
through the sleeve all the way down
to the end of the cuff right here.
And this is the part where we would normally finish
our seam with a zigzag stitch.
If you don't know how to make a zigzag stitch,
what that is, it's just a zigzag.
What we do is we'd cut this
and we put a zigzag stitch right over the edge
so that it doesn't fray.
And I made a whole video on it.
It's probably right there, right there.
I never remember which side cards pop out on.
If you want to know how to make a zigzag stitch,
go watch that.
But we're going to change it up.
We're going to do something different.
I always use a zigzag stitch.
I'm getting tired of always using a zigzag stitch.
So we're going to use this.
Boom.
See that?
But wait, SD, that's just a pair of scissors.
No, that's a pair of scissors.
Those aren't scissors.
Those are pinking shears.
And what these do is they cut a zigzag stitch pattern
in our garment for us.
It's amazing.
And it's so easy.
We're going to use those on this seam
and it's going to be great.
It's not going to fray.
It's going to save us a ton of time.
We don't have to put a zigzag on here.
So let's go ahead and let's do that.
I'm going to end up making a nice tutorial
for you guys on pinking shears.
Now I got these at Joann Fabrics.
They were like 16 bucks, I want to say, something like that.
And they had a couple of other different ones there that,
man, there was a pair by Fiskars that was like $40.
I'm like, nobody got time for that.
I'm a single dad.
I'm not spending $40 on pinking shears.
Now this right here,
we're at the seam that runs underneath our armpit.
It's kind of tough cutting it.
I mean, it's, I'm putting a lot of pressure on there
and it's really just, it's kind of struggling,
but if you kind of work it, we're through.
It's good.
So you might get some resistance.
It might be kind of difficult,
but you just got to kind of like everything in life,
just push through it, I guess, or just drink a lot.
I don't know.
And now our seam is finished.
We put a nice zigzag pattern on there.
You can see all of this, all that nonsense going up here,
all the stray stuff that came off of our jacket,
but that's okay.
What would be a good idea in the event that this happens
is I would wash it by itself if I were you.
Just kind of wash it alone
so that you can get rid of any excess nonsense
and then you're good.
You can wear it.
This, you're good.
It's not going to fray.
It's really awesome.
And if it does, it was $4!
And then you just do the same thing on the other side.
And another question that I know that I'm going to get
in the comments is you want to leave yourself
five eighths of a seam allowance,
which is about three quarters of an inch.
Someone do the math for me, let me know.
And if you leave too much fabric on here, not a big deal.
If you don't leave enough fabric on here, not a big deal.
The only difference is if you don't leave enough fabric
on here, you might not have enough room
for a zigzag stitch if you want to make one.
Boom, that's all there is to it.
I just realized that the front door is locked
and my daughter closed the garage door to go ride her bike.
So I'm going to go unlock the door for her
so she doesn't get locked outside.
That's all I got for you, SD out, deuces!
