Taper Your Jeans In 2 Minutes

Anthony Rivera
67 followers
8 Video Views·Dec 1, 2022
The leg on the right is straight fit. The leg on the left has a nice taper to it.
Let's uh let's make them both look like that. I don't like long intros. Let's do this.
Start with your jeans inside out and the first thing you want to know is that the
back of your jeans are slightly wider than the front to compensate for your
huge calves. So don't worry they're not gonna line up
perfectly. It's totally normal. The key to a good taper is having a
leg hole opening that's pretty narrow and the leg hole opening
on these jeans is a gaping wide eight inches.
For reference the leg hole on these slim fit jeans right here is seven inches so
why don't we go ahead and make these seven inches as well.
Put a sewing pin right there to mark that spot. Boop!
I'm SD and if you're new I show guys like you how to tailor their own clothes
at home. So if that sounds interesting to you be sure to click that subscribe
button down below. Our taper is gonna start at that leg hole
opening and it's gonna end at the knee on our jeans. So measure to
where your knee is on your jeans and on mine it's 21.5
inches. Take another sewing pin and place it
right at that spot right there. That's where your taper is gonna end.
Grab a ruler or anything with an edge really and draw a line connecting those
two points. Run over that bad boy with your sewing
machine with these settings and you can use a
chain stitch if you want to for extra strength but
it's totally optional. Boom! We got a nice new
tapered stitch on here and this nice narrow leg hole opening that's kind of
talking to you. It's kind of weird. Hopefully edit this part out.
Cut off all that extra fabric leaving about a half of an inch on there and see
all of that that's gonna fray on us if we leave it. Denim frays more than like
anything else. So let's finish this off with the zigzag stitch.
This right here is the finished product. Now let's go learn how to alter the
waist of a pair of jeans shall we? It's in the end card. I'll see you over there.
SD out. See ya!
