When you hang pictures or art, do you have to do a lot of trial and error to get the item to be level, where you want it, and secure? Use this approach to get your decor where you want them, THE FIRST TIME, with a minimum of hassle!
Dirt Farmer Jay shows you in this first episode how to hang "fixed point" items (decor with slots, D-rings, ledges and "saw-tooth" hangers). You'll learn how to figure out where to put the hanger on the wall so your art hangs where you want it to!
Check out Episode 2 if your artwork uses a flexible wire attached to the framework. We've got you covered there too! Click here for part 2: https://www.youtube.com/watch?v=yEAJzuZ3YG8.
If you have a favorite method or device you use to do this task, feel free to share it in the comments below!
When you try to hang artwork or decor items on your wall at home,
does it sometimes drive you crazy because you can't get it where you want it to be,
level and secure? Stay tuned and I'll show you some tips to do this job correctly the first time.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. Today I'm going to show you how to properly hang
artwork items on your wall. This is episode one of two and that's because there's two distinct
categories of mounting systems for artwork and wall decor items. The first one is a fixed point
mounting system. You've probably seen these before where it's a sawtooth anchor like this,
perhaps a keyhole slot in the back, D-rings that are mounted on the side of the artwork,
or perhaps even slots that are in the actual frame itself or a lip that you would hang the
artwork item on. That's the first kind and that's the subject of this video. The second kind you'll
see commonly is a wire mounted type of artwork and this is typical where you have wire like this
mounted to a D-ring and these get hung on the wall. That'll be the subject of episode two.
So right now let's focus on how to properly mount a fixed point piece of artwork. We're going to use
a piece of wall decor that Dirt Farmer Maggie made to show you how the process is done to get this
artwork where you want it. Now you can see it's mounted so that it's equal distance from the piece
of furniture to the door frame and there's a nice margin around this and this is mounted on a couple
of screws here using a keyhole slot method and you have to be pretty precise with this. You know the
good thing about the method I'm going to show you is it is very precise so you'll hit dead on when
you're using this kind or if you're using sawtooth or D-ring or whatever the other type may be.
But how do we get to where we know where those screws needed to be? Well let's hit it step by step.
So step one you're going to place the item on the wall where you want it and you'll have to
approximate that a bit but we're going to place it up here and we want it oh you know roughly left
or right that's not important right now. What is important is the height and when you have it where
you want it go ahead and take a pencil mark the top edge that's step one. Step two is to measure
from the floor up to the mark that you just put where the plaque is going to be when it's finished.
So we're just going to measure and we're going to put this here we'll come up and we'll find that
that mark is 54 and a half inches right there. Step two is is determine the distance from the top edge
down to where the screw is going to finally land so we can measure that and we can see that it's
going to land in that slot right at one inch. Step three you're going to measure down the distance
from this line down the distance that is from the top edge of your item to the mounting point. In
this case it was one inch it's really easy. So I'm just going to use a one inch increment right here
come down and measure down one inch. Step four now you're going to extend that line left and right
of the approximate center long enough that it'll pick up the mounting points but short enough that
the line will be hidden behind the decor item. Here we go looks beautiful light line across left and
right. All right the next step then is just simply to measure the total distance between the two
areas that you want to center the item in. So once you know that simply mark the halfway point
then measure the distance between the two mounting points in this case from there to there
is 16 inches. So using our 16 inch measurement we know that half of 16 is eight inches so using the
center mark that we placed earlier on our level line we're going to place eight inches to the
left of that mark and eight inches to the right and as you can see that's where we had drilled
those holes earlier when we mounted this piece of artwork. All right now it's time to mount the
screws that we're going to use to hang the artwork on and by the way I always recommend you use
screws over nails because screws are more precise they can be repositioned and they grip the dry
wall better leading to a stronger attachment. So let's go ahead and place these in drive them
slowly and if you hit a stud that's even better in this case we're going directly in go slow
and leave them just proud enough that the item can be fastened directly on. Do the same thing here
notice the slow speed and light pressure. All right we're ready to mount our artwork. The way
that this type of hanging system works is that the screw head is going to go in the larger area
and then we'll slide the artwork over locking it onto the wall. So let's see how precise we were
line the holes up there it is slide it's locked on the wall look at their beautiful result
and here we are beautifully mounted exactly where we wanted it level secure on the wall
looks really great. Hey if you want to find out how to hang a wire mounted piece of artwork you
can just stay around for just a moment longer and you'll see a thumbnail in the end card that
you can click on and go directly there or go to the description below and you can see the link
there to see how to do wire mounted systems in episode two. If you found this video to be helpful
won't you like it and better yet subscribe if you haven't already. Until the next time this is
Dirt Farmer Jay from DirtFarmerJay.com