Audi A3 8P - Gets New Brakes!

MotoAdventuresYT
21 followers
6 Video Views·Feb 17, 2019
Thank you for watching! make sure to subscribe for more videos on this Audi A3 8P!
Comment down below and let me know what you think about this video as well as what you want to see in the future!
https://www.instagram.com/motoadventuresyt/
https://www.facebook.com/MotoAdventuresYT/
https://twitter.com/yt_motor
https://www.youtube.com/channel/UC37q8BO_nT18vvoPK88vxjw
So I've just come to my car and I've got some, looks like a cat's been on my car and just
made it all dirty again after I washed it yesterday. So that's great, that's a good start to the day.
Okay lads, welcome to another video on the channel. Today I've got my new brakes, I've
literally just got them in the post. So yeah, I'm gonna go ahead and walk you through what I'm
gonna be doing. Basically for the standard size, they're Bosch, I couldn't really find anything
that I wanted, so I went ahead and gone with the sort of standard look. So yeah, what I'm gonna be
doing is, with this centre hub on the standard ones, they start to rust over time. So I've gone
ahead, I've got some spray paint, which is heat proof, as well as some masking tape. I'm gonna go
ahead, I'm gonna mask all this up, spray the centre hub, just because I don't want any new, any rust
on my new discs or anything like that. And then I'm gonna go ahead and walk you through me fitting
these on the car. So I've also got the brake pads as well, new brake pads. I know my brakes that I
have on the car now are Mintex, but I just find that the Mintex aren't as good as everyone thinks
they are, and in the past have like overheated and started failing and everything. So I thought I'd
just go ahead and try and go back to the standard look and see how we go.
Okay sweet, so I've got both brake pads all taped up. Now if I have any paint on the actual disc
itself, it'll be all right, because the brake pads will just wipe off when I put them on the car. But
yeah, hopefully this comes out all right. It says high heat, it's sort of a matte black finish, so
we'll see how this goes.
Okay, so we've gone ahead and get the wheels off. I haven't got an impact gun, so I'll just do this
by hand. I try to do this quite fast before it goes night time, because it's about five
o'clock now in the UK, so it goes dark quite quickly.
So I'm going to go ahead and just open up the brake fluid reservoir, so we don't have any
pressure. There you go, it doesn't have to be all the way up, just a little gap there.
Okay, so I've gone ahead and pulled the handbrake off, so now it's just a matter of fact if I'm
doing these rear bolts. Right, so make sure you go the right way, otherwise you end up doing it up
What a twat!
Okay, I've got it. So these pads have still got quite a lot of life on them, it's just I
noticed over a while that they can overheat over some basically aggressive driving. So I'm going
to go ahead and change these out. You can see it's got some scoring marks. I'm not sure whether
they're just from the brake pad, or it's probably having a stone or two stuck in the caliper.
Copper grease, cool. Best friend is definitely copper grease. That is hot.
Okay, so I've gone ahead and tightened up the nuts, now I'm going to go ahead and do the other
side. Get the back ones off, there we go. Caliper off, so if you can just try and balance it up,
so it's got no weight on the brake line. Take your old pads out,
so that's just resting there. Take the disc off, a bit of copper grease on the hub,
cool. Get your new disc on, wind the piston back.
Going the wrong way. Yeah, that's good enough. Okay, where's my new pads? Right there,
cool. Like that, okay. Alright guys, so I've just finished bleeding the brakes again,
so yeah, there we go, that's my new brake setup. It's basically, I think it's called Bosch,
Bosch disc and pads, so it's probably not far off the standard setup, but I just wanted to
stick with these because I didn't like the Mintex disc and pads, I find they're not as
good as they were standard. These are quite old, but you can see how rusty these have gotten,
so they're not really ideal, so I'm pretty happy with this setup. I'll go out, go for a drive,
see how it goes and hopefully I can see some good results. Okay, so I've just put the wheels on,
they look very nice and I've also put the two grommets on this rear taillight as well, so now
that's completely solid as they came in today as well. So yeah, I'm going to go ahead and take
it for a drive and see how we go. Okay lads, so this is the next day and basically the brakes
have been awesome, there's so much more of a pedal response and I also feel like before I got these
brakes, the front of the car had more braking and stopping power than it did with the back,
but now I can definitely feel a big difference between the back is definitely helping the car
stop a lot more now with these Bosch brakes and yeah guys, definitely I would not recommend
getting Mintex, they were the first brakes that I've had on this car and yeah, they weren't amazing.
So they're basically just a budget sort of setup and yeah, I'm really happy with this
sort of setup. It's been a freaking difficult day because my window regulator has given up,
so I'm going to go ahead and get the door card off, I'm going to have to have a look at this,
it basically, when it goes up and down it just makes loads of crunching sounds,
so I think I'm going to have to get a new window regulator, so that's going to be a couple of more
bob, so you know, this is one of those things and it can't really, it's just one of those things in
life, but yeah, I'm really happy with these brakes, all the paint's come off now where the
pads hit, but you can see the centre's still black and it still looks pretty neat, so yeah,
I'm happy with them. So I hope you guys enjoyed this video, make sure to just like,
comment and subscribe, so yeah, I'll see you guys in the next video.
