Audi S3 8P - My New Rear Lights!

MotoAdventuresYT
21 followers
18 Video Views·Jan 4, 2021
Rear Lights - https://tinyurl.com/yyklrkml
Reverse Light Bulb - https://tinyurl.com/yaxld4vl
LED Brake Lights - https://tinyurl.com/y8zyfv5m
Gommits - https://tinyurl.com/y9njrb29
Instagram - MotoAdventuresYT
Facebook - MotoAdventuresYT
Twitter - YT_Motor
YouTube - MotoAdventuresYT
Thank you for watching! make sure to subscribe for more videos on this!
Comment down below and let me know what you think about this video as well as what you want to see in the future!
https://www.patreon.com/MotoAdventureYT
https://www.instagram.com/motoadventure
https://www.facebook.com/MotoAdventuresYT/
https://twitter.com/yt_motor
What's going on guys and welcome to another video where this is a pretty exciting video for me
because I always think that these make a huge difference and I believe that they'll make a
difference on any of you guys if you have a pre-facelift S3-8P this is definitely the mod to
go for. So of course it's another sunny day in England absolutely lovely weather outside and
we've gone ahead and we've got the nice facelifts rear lights to go on to get rid of these ugly
pre-facelift lights and if you guys haven't seen I did not want to go ahead and make a
video on it because I've already made a video on it but I've gone ahead and painted the S3 wheels
my these actually came out so much better than the originals that were on this car that I made
a video on 10 times better I'll go ahead and whack some pictures up for you guys of what taken now
and it just looks so much better right in every angle it's definitely what the car needed just to
especially when it was done it actually like looks like my car like it doesn't look like a
standard S3 anymore which is completely what I wanted and even better we've got the lights today
so I'm gonna go ahead put these on as well as I'll show you guys I'm gonna replace the grommets
which basically these lights are held in with grommets that are like two grommets here
and I'm gonna go ahead and show you guys how to replace them the best way and just the best
possible outcome from the replacing them really because sometimes when you're putting these lights
in you can push the grommets in they fall into the car and unfortunately you can't get them back
like even on this one where I've completely stripped it I've still not found one that I've
pushed in before so yeah once they're in there they're long gone so I'm gonna go ahead and get
these lights out it's very very simple you've got this little hole here and you just put either a
13mm socket over the plastic nut or you can use a flat head just to take that out and then once
you put that out it's literally super easy just pulling from this side to pull the two pins that
are inside grommets I'll show you guys in the video and then the whole light comes out so I'll
go ahead and give this a try just one-handed but this is the plastic nut that goes in there
and just screws onto a thread as you can see I've used a flathead screwdriver just to untick that
out so once that out literally all you gotta do is come here and just pull it like that and it's
all come out already and then once it's out you can see there's the thread that the nut goes onto
there's the two pins and these are the two grommets I'm talking about so these if you get
this right wrong you can push them in and once you're in they're forever gone so I'm gonna head
and undo this pin it's very simple you just want to push that pin down and pull and then once it's
out it's done okay so I've got the light out this is the another set of lights which I did not fit
because these aren't the right ones this is basically there's like a preface this is for
the preface A3s and I wanted an S3 preface light so I've gone ahead and sold them ones and then
bought the correct ones so we want to do guys is get all the bulbs out your carriers because
them carriers will not fit sorry this carrier will not fit in the new lights because they're
slightly different bulbs so I'll go ahead and show you guys once I get this one out but it's
very simple pull these clips back just literally that'll start coming out you get the other side
as well but so there we go super easy literally just pull these pins back both at a time and then
pull the casing back and you'll see it comes out very very easy so I'll go ahead and link you guys
in the description to this LED bulb super bright reverse light you can see a lot more at night
what's behind you it's just a definitely like a cheap little upgrade and it makes a lot of
difference it looks a lot smarter as well so yeah go ahead take all these bulbs out I believe this
one might be different for the new set but I'll go ahead and cover that in the video once I get
these lights out and I'll show you guys so as you guys can probably tell the difference this is the
A3 so like there's just cherry red and then with the S3 facelifts it actually comes with a nice
tint around the back and it just looks so much more tidier you can already see like that's so
much darker compared to them so yeah I'm gonna go ahead get these bulbs out this is the bulb
carrier so it's brand new bulb carrier so that's even better so this seal will be brand new in there
and then I'll show you what bulbs these ones take okay guys so this is the new cluster and this is
the old cluster so basically the only difference is this top bulb is instead of being a normal
round bulb like this like that it's actually like a interior light one which I've got one here and
it is canvas so it's no errors or anything like that I've changed it to LED because you know why
not I'm gonna head and see what it looks like when it's actually in the light if it's too white
because obviously these are meant to be red if it's too light white then I'll just change it
back to the original because these are normally yellow we'll see how it is and then the rest of it
is basically ready to go in the car now I've tested it make sure you guys put the clusters in
test it before you put everything on because I've done it before where I put both three lights on
had to take them off then put them back on then take them off it's just better to just put your
cluster in see if it works and then go ahead from there so I'm gonna head and put these lights back
in very very simple all you want to do is make sure these pins grease them up a little bit so
they fall inside the grommets a bit easier so for example the WD40 spray it inside just so when you
put the grommets when you put the metal pins in they slide right in instead of catching on the
edge and then pushing them into the car which is exactly what you don't want if you guys have done
that or if you guys take your light off and realize that you have any of these missing I'll
go ahead and put a link on ebay to a set of these that you can get two at a time which look like this
like that very very simple to change just grease them up push them in because I know that this side
is missing one that's why I've got a set there now already look at the difference
that looks just so much better insane and then this is the old
---- light so I'll show you guys what it looks like when you put it in reverse you'll see what
the reverse light looks like the clutcher don't know if you have to have the ignition on
oh yeah oh it doesn't look as good on camera
ah you can sort of see it it's literally a bright led like I can't even look at it it's actually
that bright which is exactly what you want because it lights up everything behind you
I think one of my parking sensors have got has either failed or it's got something in
something interfering it because when I put it in reverse it just doesn't switch on
the sensors anymore but I'll have a look at that later on okay so I'm gonna go ahead and move on
to taking this one out and to get the new one in but already 10 times better okay guys so I've
gone ahead got this light out so I've just this is the grommet some of that so this is the original
one and I've just put this one in now uh what you want to do is just glue the back of the grommet
so here's another one for example you want to put glue all on the back of here so that
when you put it in it hopefully it resists from falling in if if any pressure did come to it so
that's glued in now go ahead and let that dry and then I'll do the same as I did on this side
just get some wd-40 spray it on the hole and just uh hopefully the light will just slide in
um without any issues at all but uh yeah looking good okay so the same thing
as you'll see is um the opposite side to what we've just done will be a bit different so this
is the fog light uh and the fog light bulb is actually different to the other sides um but
that's literally all that's different other than the obviously the one I told you guys about before
so I'm just gonna swap over the ones that are the same and then I'll go ahead and get the
pack which I've got here I'm not too sure if I have the link for these I'll go ahead and check
my eBay and see if they're still on my purchase history but most of them are just canvas led
lights and you'll see them literally straight swap and uh make sure they're canvas so they
don't get any errors um and then uh yeah and there we are both of them are on looks so much better
I'll go ahead and put a before and after picture up now 10 times better so much cleaner oh man
like I said guys this is definitely the mod to do for your pre-facelift version of the S3
um I know it's absolutely filthy isn't it it's really bad but uh that's probably where the uh
why the parking sensors aren't working because there's probably so much dirt on them but yeah
it's so much better I'll go ahead and leave the link in the description for the lights um and I'll
just if I can get the bulb link I'll do that as well and the grommets will be in description as
well um but uh yeah guys I hope you guys enjoyed this video uh I'm gonna head and tidy up now
get everything all packed away and yeah I'll go ahead and catch you guys in the next video
and uh yeah see you there
