Maintenance & New Mod! - Audi A3 8P

MotoAdventuresYT
21 followers
19 Video Views·Mar 6, 2019
Thank you for watching! make sure to subscribe for more videos on this Audi A3 8P!
Comment down below and let me know what you think about this video as well as what you want to see in the future!
Heat Wrap -
https://www.ebay.co.uk/itm/Universal-Car-Exhaust-Pipe-Tape-Engine-Protection-Foil-Insulation-Thermal-Tape/303024012010?ssPageName=STRK%3AMEBIDX%3AIT&var=601959944754&_trksid=p2057872.m2749.l2649
https://www.patreon.com/MotoAdventureYT
https://www.instagram.com/motoadventuresyt/
https://www.facebook.com/MotoAdventuresYT/
https://twitter.com/yt_motor
https://www.youtube.com/channel/UC37q8BO_nT18vvoPK88vxjw
what's going on lads first things first before I get stuck in to this video
basically I've got a new air freshener cool so got my air freshener in I know
some people have these still stuck inside the bag but yeah I'm not gonna do
that so let's get this thing so it's gonna be a cold start
there you go boys best step best way to start a day a couple cookies a choccy
bar and two bottles of Ribena happy days let's get this job done
okay lads so basically in this video I've got a couple little bits to do
which I'm gonna be focusing on the engine bay so yeah I'm gonna try and
pretty up this engine bay a bit in one of my previous videos I said that I
have this logo which I do I just need to glue it into these little holes and I'm
also going to put gold heat wrap tape on the intake this pipe and that pipe so
yeah it's gonna be quite a different one I know some of you guys might not be too
keen on the gold but you know I thought why not I'm gonna be different and I
think I'm gonna like the look of it so I'm gonna go ahead give it a go first
things first so I'm definitely going to fit the little logo as that's the
easiest thing to do you take the engine cover off turn it upside down and you
can see that factory these actually have glue that keeps these little pins in on
the other side so I'm gonna go ahead I've got some better glue Gorilla glue
and I'm gonna go ahead doll up loads on here so these pins can definitely stay
in there the spanner and the torch just here just to hold the engine pack the
cover down so it's flush okay so just finished putting all the glue on these
little pins so I'm gonna go ahead let us dry and get started on stripping the
intake ready for the gold wrap which is over here so this is what I'll be
wrapping it with I'm gonna try my best not to get any wrinkles or creases or
anything like that alright lads so here goes nothing I'm gonna go ahead and
trying to start from the well I should restart from the bottom go round and
then stop at the bottom again so this is the top half as I've
taken the sticker off there so there's a line which shows where the intake is
actually being covered so if I start from about here I'll pull it while I
unwrap it so far so good okay that looks alright that's gonna be the top
so now I'm gonna go ahead and finish doing the rest okay so this is where
we're at so this is the top of the pipe and this is the bottom obviously there's
a bit missing here but you're not gonna see that when it's on the car I think it
looks alright it's not too wrinkly or it's not too many creases I think it
looks alright yeah so I'm gonna go ahead and whack it on the car right now okay
guys so I've just got the air filter back on put the tube that we wrapped in
the heat wrap back on and I think it actually looks really nice now up close
there are you can see a little bit couple wrinkles here and there but from
a distance it looks pretty sick I must say myself like so yeah I'm pretty happy
with that everything's all tight I did put a little I adjusted the bracket
because it was sitting a bit too close to the battery so I'm gonna go ahead and
whip this one off now hopefully that's just straight easily comes off and then
we'll go from there okay lads so I've gone ahead and put the
engine cover back on basically this is held on by this clip as well as a bolt
down there and there's another clip down there which I cannot get to it so I'm
gonna have to leave that one to another day but at the minute I'm happy with this
it looks really nice otherwise yeah I'm happy I've got this sorted fine now I
could do a little bit of a clean the excess glue that's on there but yeah so
I hope you guys enjoyed this video it was quite a quick one it's just a little
bit of a maintenance or modification engine bay video but yeah so if you guys
want to see anything more on this Audi A3 make sure to subscribe like this
video and comment down below what you guys want to see next so I'll see you
guys in the next video
