Thank you for watching! make sure to subscribe for more videos on this! Comment down below and let me know what you think about this video as well as what you want to see in the future!
What's going on lads, how's it going? Today's gonna be a little bit of a different video
just because I don't, I'm not, I haven't got my GoPro on me so bear with me, I'm using my phone
but I did want to get this video done. But today we're going to be de-wipering the R32.
So if I quickly turn the camera around, this is how we are now. I'm gonna go ahead and pull down
the boot. So we're gonna go ahead and get the wiper off today. Since you guys, since I last
spoke to you guys, a lot has actually changed with the car. I've got the whole car ceramic coated,
hello, I've got the whole car ceramic coated, I've changed the engine oil,
what else have I done? Not really a lot, I've got the dash cam mounted, otherwise I've just been,
I've just been keeping on top of like keeping it clean and keeping it all tidy inside.
But otherwise I've literally just been working all the time to get the,
pay for all the mods. So yeah, so basically it's gonna, it should be quite an easy video.
I've got the bung here which is basically, if anybody's seen my video about the Audi A3 and
how I changed the wiper with that, I think it's gonna be basically the same sort of job,
probably even the same panels. So it looks like it'll probably be, obviously the lights,
the lights are on the boot with this car so it might be a bit different. But yeah, I'll go ahead
and I'll get started, try and get this panel off now and then we'll go from there. I've got some
gloves on now. First thing I'm going to do is take off this little cover which basically covers over
the bolt. There we go, just a little bit of force to get it off. How does that come off? That pulls
off like that. Okay, get that off and out the way. I've actually got some more tools as well.
I've got this tool kit, basically it's, well it's not really a tool kit, it's just a box basically,
but it did come with some tools which is pretty cool. Obviously I still got the same tools and
all my little bits and bobs I got around here, but otherwise, same old. So that looks like 13.
Grab myself 13, 12, 13. Okay, now hopefully, so that's come off. I'm not really worried about
the nut coming off, it's actually getting the wiper off itself can be quite difficult, but I'm
hoping it won't be too bad, but we'll find out now. Okay, yeah, wiper off. It was actually a bit of
pain, so what you have to do really is just tap it, get WD-40 on it, and then I used a long
screwdriver and a cloth and basically pried it underneath the arm and then pulled up and it
actually came up, but you do need to tap it all around if it is really bad, because someone's
actually had this off before and greased it a little bit there, but that didn't really help
to be honest. So I'm going to go ahead and start cracking on with trying to get these panels off
the back here. It should be pretty easy from what I can see. It looks like it stops here,
so that will be just a straight pull down, pull down, take these off just in case there's any
screws to hold this panel on, which does not look like there is. So that looks good. Take that side
off as well. There we go, and then I think, oh I think it might be screws in here. Yeah, there is.
So there's two screws, one each side, and then I think the rest will be clips.
So this is what it looks like. This is the water hose for when you're sprinkling your windscreen,
your rear windscreen even, it's dripping all over my lovely boot. So yeah, you basically just pull
that clip back and you just pop it off and she's solid, she's good. And this, it was in there like
that. I used a flathead screwdriver and just pried that back a little bit and she's a good one as
well. So just put that there for now. And now we just have three bolts here that'll come off and
then we're good. We'll go from there. Okay lads, so I've just taken out the three bolts here.
This is your wiper motor. It literally just basically fell out, so that came straight out
and this is what you're left with. You've got your, yeah, you've got them too.
And this is sort of your little seal, so you want to push this through
and there she goes. And then you've got this lovely looking hole, which if you don't have the,
if you don't have the little plug, then you are absolutely screwed. But luckily I do have it here
somewhere. But anyway, I'm going to go ahead and get some window cleaner on this, clean this all up.
And I've got some seal, sealant on the shelf over there. Where is it? It's not on there. Okay,
that's brilliant. So I'll have to have a look for that, otherwise I'm going to be screwed. But
anyway, I'll go ahead, clean this up and then I'll get back to you. There with the window cleaner and
that, I've got some masking tape and you just want to mask around the area that you'll be using
sealant. I'm actually going to mask up here as well because I don't want any sealant up here at
all. I just want it to be a clean job. I don't want any fricking sealant everywhere. But can I
just say how much of a stunning day it is in England right now. And it has been actually for
quite a little while now. It's actually been, sorry mate, has actually been spot on weather,
but yeah, it's been really, really warm and always sort of clear sky. It hasn't rained
for fricking ages. But yeah, I'm going to go ahead and I'm going to put some tape on the top
there. And you're also going to want to put tape, take your little banger out, just move that over
there, put that on the floor there. And you're also going to want to put tape around, as we clean
this window as well, put some tape around this area as well, especially on the paint, just so
as minimal as possible that you can get any sealant anywhere other than where you want it to be.
So I'm going to go ahead and tape this up and I'll come back to you guys.
So I've just cracked on with taping up this side and even already like I can tell that this is
going to look fricking sick. Even though the arse of this car already looks sick. I do need to get
some more. I do need to get some spaces I think for this car because I don't know, I just feel
like they could be a bit more wide on the back. Like if the wheels were a bit more fair around.
My Audi they were 8.5J wheels, these are absolutely standard so they're 7.5J.
But with some spaces I reckon they'll be pretty cushty and I reckon that will make the back of
this car look a lot more thicker. But we'll get there. I have seen someone online so I'll go ahead
and I'll get them when I can. But I'm going to put some more tape around this I think. Actually
where's the actual thing. Yeah so this actually goes on like that. So it will actually be sticking
out a little bit which is fine. I'm going to put some tape up here and then I'll get back to you.
Okay lads so I'm going to try and do this as best as I can. But basically this is the
sealant I have. It's super RTB silicone. Good for like oils and whatnot and water obviously.
So I'm going to basically just put it around the edge, cover it a little bit.
Maybe put, I don't know if I need anything on there really. But I'm going to go ahead and fill
this up and put it in and then I'll get back to you. If I can I'll put the camera on here and
record me putting it on. But yeah. I'm going to have to use my glove to get it around anyway.
Shout out to Jason my main man for you know donating this bottle to me because I did not
actually buy this bottle. Jason actually let me borrow it and then well I haven't given back to
him yet. So I'm just going to go ahead and just smother the thing. I mean at the end of the day
I can just wipe it off on the outside anyway as long as it sticks. So I'm gonna go ahead and put
this on the car quickly back in a sec. Okay so this is what we're looking at. Basically I've
got it in there, got the sealant on it and I'm going to pull the boot down. It looks all right.
I think I do need to push it in a bit more actually. So I'll get some more gloves and I'll
get that in flush and I'll come back to you. What we've done now is I've got it on there
and it's flush. The sealant is actually drying. She's flush, looks spot on. I'm liking it.
And while that's drying I'm gonna go ahead and start blocking off
the water hose which is not here. Where is it? I've lost it.
It's there, right here, right here. I'm flicking blind. So I'm gonna go ahead and get you your 1920
old-fashioned pliers and you just want to go ahead and yeah just snip it off. You know
over. So now we've just got a random tube. It's going to squirt out water every time
if I press it you know what I mean. But we're not going to do that. We're going to get a nice screw
in there. I'm going to cable tie it. We might even put some silicone in there just to make
sure she's definitely all bunged up and not going to piss everywhere when we're driving.
And then we've got this tube. I've got a little 10mm socket bolt in there which is actually
sort of like a wood screw in there. Put the silicone on it. Cable tie it. Turn the tube around
so this sort of pinches it. Cable tie that. Put it back in the cable holder. Got this still dry.
I might start taking the tape off because ideally it doesn't really matter if you want to start
putting all the plastics back on because it doesn't actually touch it. Otherwise just freaking
leave it and I'll go ahead give it a wipe on the other side and we should be kushty.
If you get one of these I'll put them in the link in there in the description. This actually has a
sticker, a white sticker underneath all that silicone which you basically just peel off and
gets rid of any excess silicone which obviously that's a bit too much but you know you get the
picture. I'll wipe it all down later and hopefully it should look good. Okay lads so basically I've
just got the panel back on. It was actually very easy. Just basically hit around the panel,
put the two screws in. One there, one there. Even if you have an Audi A3 it'll be exactly the same.
Now I'm missing one bit and that's this. I'll just scratch the ---- out of that but you know
here's what it is. And then this clicks back in there. That's in there, that's all good.
That's all clips back in. Done that, done that. Is this in? Yeah. So you just want to hit around
make sure, ah I didn't even take that bit off. Just make sure you hit it all around so all the clips
are in and then we can work on the exterior. So we'll take all this off, we'll wipe all that down
and then we should be done. And I've just got to tidy up all this. It's a good idea to just keep
your wiper motor separate. Keep it as well as the screws and everything. I know that I cut that
little bit here. Even just hold, keeping hold of this so you can keep that end and put it back on
that line. So if you ever wanted to sell the car, whatever you can crap on,
put it on if you wanted to put it on. But yeah I did see this was in the
little cover panel thing. There's a little bit of glass which I don't know where that's come from.
Nothing's smashed so unless it's something to do with the rear lights, the glasses
sound. So it's a bit of a weird one but anyway I'm gonna go ahead take this all off and get back to you.
Okay lads, so I've just finished up the car and it looks so much better. Check that out.
That looks so much better now. That's actually a really good job I think. So uh,
I've actually got sealant, silicone on my hand. That looks so much more tidier. See what I mean,
it just needs a little like, a little inch more out. So just so it looks a bit more thick. But
one day when we have the bigger miltech pipes on there and if we get some lowering springs or
whatnot maybe in the future, at least we'll have this done. De-wipers. That's actually a really
clean job and I will put that bung in the description. It's good for Mark 5, Audi A3s,
S3s. I believe it's all the same size and basically the same install as well. So
I'll go ahead and give the whole car clean tomorrow but I'm gonna go ahead and let that
dry just so I don't soak it and then next minute if I can get water down his other boot. But yeah,
I'm gonna go ahead and end this video guys. If you liked, make sure you like the video
and subscribe if you're new because I know that I haven't uploaded in about a month. I know it's
quite bad but I've just been constantly working and I need to work to buy the mods so I can record
for you guys. But yeah, I'll go ahead and see you guys in the next one. Make sure you subscribe
because I'm gonna keep uploading this video. Uploading to this channel whether it takes a
week or up to a month. There'll definitely be a video on this channel eventually. So yeah,
I'll go ahead and see you guys in the next one.