Restoring a Queen Anne Chair - Thomas Johnson Antique Furniture Restoration

Thomas Johnson Antique Furniture Restoration
41 followers
7 Video Views·Aug 6, 2021
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine restores a handsome Queen Anne reproduction chair using parts from a donor chair in its set. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, call us at (207) 222-2266, or write us at [email protected]. And for those on the west coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson, Thomas Johnson Antique Furniture Restoration in Gorm, Maine. These are two nice
chairs. They're part of a set of eight and the style is from the mid-18th century. You could say
Queen Anne style, but these chairs are reproductions. They're made of mahogany and my guess is they're
probably from the early part of the 20th century. As these chairs fell into disrepair, they were
stored. Now we're going to fix these up. This chair is in the worst shape. It needs a new seat.
It needs a new rail before the seat. It needs a new spindle down here because the ends have
been repaired too many times. This chair is in much better shape, so I think we're going to
restore this chair and use that one for parts. In other words, this rail is broken here. I'm
hoping I can use that one and this backsplat is missing a section over here, so I may use
that backsplat. Once they're all repaired and tightened up, they probably just need to be
cleaned and waxed. I'm going to start with the parts chair because I'm going to take the seat out
and I feel like I'm going to pretty easily be able to get to these parts. The other chair I won't be
able to take apart, so I want to make sure I can get these parts before I start working on the other.
can I get this piece, which came from the other chair, in here because remember I'm not taking
the seat off. Before I do that, I know that the backsplat from that chair fits this rail because
they came out of there, but I need to make sure that this fits the crest rail. The dowels certainly
cut new dowels. I could just go by the length of their dowels, which is one and an eighth,
but I'll measure. The existing holes are about three quarters on this piece. That hole's about
a half. This one's more like three quarters, so maybe one and an eighth is about right.
All right, now let's see if we can get this in there. I've got a ways to go here. I'm going to
switch this clamp to the other side so you can see. Boy, I got a ways to go. I want to scrape
these tenons. Yeah, good thing I'm checking this. This one doesn't want to fit in there.
starting to complain. I'll just keep pressing this as far as I can. Worst comes to worst,
I'll have to trim these tenons a little bit, but I want to avoid that or at least keep it to a
minimum. Boy, I'm close. Okay, I'm ready to glue this, and I think here, you know, I can't really
see, but I feel like I'm going to I'm going to squirt some glue in on these tenons too. I mean,
they have to be separated somewhat at this point, so I'm just going to squirt some in there and
hope that it does some good. I'm using hide glue on this project. This comes pre-mixed,
but you have to heat it up. It's good stuff. This chair is a good example of how you do need to
I'll put the crest rail on dry just to make sure these are in the right position.
I think I can go ahead and glue this up.
So,
all right, now we can see if we can glue up these joints. So, just like the back section,
I've got to see how much I can re-glue, and of course, I'm limited by the fact that we're
keeping the seat intact. Well, I'm just noticing now, it was not obvious before,
but this spindle's been repaired before. There's a dowel drilled into the spindle.
It's interesting because the other spindle on the other chair had been repaired also,
but there they used such a big dowel that then the spindle split,
and you can see here where that dowel caused this part to split off also.
Well, I just hope that I can, you know, all these joints, I can spread it just enough to get glue
on the joints, then bring it back together and hope for the best.
That looks good. I think I'll apply some heat to the other side.
Well, I thought maybe it budged a little bit, but I'm not sure. You know, there may be a nail in
there. These marks, I realized, are marks from someone trying to get a nail out, and this other
one has a nail. I'll try to wiggle it out. Good. I better start marking these things.
I'm marking this one too, even though I don't think this spindle's going to come out of there.
All right, I think these side stretchers are good. They're ready to glue. This one seems fine,
so I got to figure out what I'm going to do about this big turning. Now, this turning,
I'm not going to try to get out of there. We have no idea how long these dowels are.
I get a pretty good idea here, though. All right, I'm ready to glue this up. You know,
all I can do is work as much glue as I can into these joints and clamp it up. There's nothing
we can do about these joints right now. Maybe later I'll use a little CA glue or something on
them. We'll see, but all the others with hot glue.
Really good, really good. You know, I could let the glue cool off a little bit, you know,
cooler temperature, and it would be a little thicker. It wouldn't be quite so messy,
but especially on a job like this, I feel like the heat, the hot glue will just penetrate better
and will help mix better with the old glue. Okay, I'll let this dry overnight.
This chair seems incredibly sturdy. It's like a rock.
So, now I'm going to clean the chair. I've noticed on the bottom and other places this
whiteness and stuff, which makes me think it might be a little bit of mold, like mildew,
something like that. So, I'm going to clean it with vinegar.
Usually, I'd mix a solution of like one part vinegar, two parts water. This is super strong
vinegar. It's more concentrated. So, I'm going to use like four ounces of vinegar and 24 ounces
of water, something like that. It's not critical. So, I'm just going to use a rag and go over it
gently. Remember, this is part of a set. I don't want to take off any color at all. I just want to
time to dry. So, the next step, I'm going to go over it with scratch cover using steel wool.
So, scratch cover, I suppose, is just, I think of it as like a lemon oil polish, but it's got
stain in it. And the idea is that the stain won't affect areas with finish, but they'll really
hopefully help out with all these scratches and abrasions and stuff that you see here.
And I'll use steel wool to apply it just to help smooth it out. There's some areas of the chair
that are a little rougher and also it helps as an abrasive to clean anything else off the surface.
And of course, that looks great at first, but we won't really know till this dries. All right, I mean,
you can wipe off the scratch cover right away. I'm just going to let this sit here for a while.
There's areas that I feel like might benefit from the oil sitting there for a while. And then I'll
wipe it off and let it dry. All right, this looks good. I actually ended up letting this sit here
overnight, but it seems fine. I'm going to wipe this down with a clean paper shop towel,
getting off all the excess. Boy, this old finish has really responded well to the scratch cover.
And it looks great. I'm still going to go over it. I just feel like no repair job would be
complete without going over it with the beeswax polish. I'm going to do that real quick. All right,
now I'll go over it with this rag. This is a rag that I've used for polishing for years. It's
saturated with the oil polish, and I'm just going over it to pick up any excess and even it out a bit.
Now, I'll let this polish dry for about an hour while I go eat lunch. Okay, I can just buff it down now.
Well, there you go. This is a really nice reproduction side chair. It's one of a set. It
came in in really rough condition, but boy, the finish just responded so well to the scratch cover
and the beeswax polish. And if you remember, I used the old parts chair and put in a new
cross piece here and the new back splat because it was broken. And I managed to, you know, get
this apart enough where I've glued it, but we managed to keep the old rush seat. I think it looks pretty good.
