1956 Rudge Town Bike - Vintage Bicycle Restoration - 95% Complete
5 Video Views·Nov 16, 2022
So let's start off. If you haven't seen what this bike originally looked like
go and check it out first. It will definitely be linked at the end of the video
but I'll also try and put the link in the description. But you can see how it started off.
But you can see how it started off. You can see how it was just painted all blue and horrible.
But now it is this beautiful wine red. Had a fresh powder coat on it and it's got new
decals all over and it is ready to be centered in shot, correctly exposed and assembled.
I think I'm going to change out the rod brakes for another set of rod brakes, don't worry.
I keep on thinking about changing them to calipers which is easy enough done
but I'm not. I'm going to try and run with the rod brakes. Unfortunately as I found out during
the powder coating process you can't powder coat chain cases or small things like that.
You can do mudguards, mudguards are fine but powder coating chain cases does not work.
It actually destroys them. The heat from the powder coating process melts all the,
I don't know, silver solder holding it together and yeah ruins it. So unfortunately the chain
case got destroyed in the powder coating process but that only means that I get to see the lovely
Rudd crankset in full display all the time now. So yeah enough of that luck, let's get on building
it. Well I was progressing nicely but I think rain's about to stop play. It's gone all dark,
it's drizzling. So yeah it's getting there together. Mudguards look great on it.
I've swapped them out by the way, they're not the original ones that came with the bike.
I'm going to put a rack on but that rack isn't going to fit it looks like.
So I'm going to try my other one that I've got and then yeah hopefully the rain holds
off and I can carry on. Still on yesterday's brightness but another day, another build.
I spent last night cleaning a bunch of stuff, cleaning the wheels up, they took a while
and realised that the front wheel which I bought to replace the
knackered one that was on this, it wasn't stainless but the rear was so front wheel's
got stainless now. Unfortunately that one had a bent spoke or a couple of bent spokes
and all the nipples are destroyed, they're corroded. Every time I try, well half of them
which I've tried to undo and replace have just crumbled and the other half have been
replaced already so I need to cut a few spokes on the front wheel and sort that.
Rear wheel's ready to go, got some white walls to go on and the only other issue I have at the
moment is the bottom bracket. I have no idea what's going on there, the bike should be 26
threads per inch as it's a rally heritage era bike. The cups that came off the bike will not
thread in for some reason, no idea why but 24 threads per inch will. Now when it was powder
coated I did lightly screw in a 24 threads per inch cup each side, like literally lightly just
so it bound and it locked the threads off. I have no idea if the person powder coating the frame
decides to wind them in a bit more and then the threads have been damaged but for some reason
24 will go in now but it still bottoms out before I actually get it fully threaded.
So I've left in a little bit of a conundrum if that's the right word there, I could take it to
the bike shop, get them to chase the threads so they're 24 threads per inch but they will be
slightly weaker. I mean the two threadings are close but they're not ideal to do that, I doubt
they'll have a 26. So unless I go for a threadless bottom bracket like a damaged thread bottom
bracket but then I will lose the Rudge crankset because those don't come in cuttered.
So yeah I'm going to carry on now, I'm going to start fitting the rod brakes back to it
and I'm using the nicer set that came off the Rally Superb that I just turned into a single
speed a while ago, so yeah that's going to go on. Well that's quite some transformation at the
moment but it hasn't been an easy build, not in the slightest and it's still not quite finished.
As you can see the last thing to go on is the Sturmjacht gear cable.
I've apparently run out because I can't find one anywhere, I thought I had a few
knocking around but I haven't so I'm going to stick one of them on order. I'm also sticking
on order a, what do you call it, a half link chain because as you can probably see it is
super close to the edge of the dropouts where I want it there. I can't have it too far back
otherwise the mudguards rub so yeah half link will solve that and apart from that it's gloriously
clean apart from the whitewall tyres and ready to go, yeah really happy with it. Of course I've had
the niggles along the way, the chain guard that was meant to be on it disintegrated in the powder
coating, I didn't realise that was a thing so be warned if you're going to do that it's not
going to work. The rest of the bike, the wine red has turned out beautiful and the decals as well
really set it off. Whitewall tyres make everything puff but I mean on the plus side not having the
chain case on I do get to see the rugged chain wheel out in the open air so that's nice.
Where have we gone next? Oh yeah I stuck on the brake set, the nice clean stuff off another bike
so that's why I had to fiddle about with the handlebars and change the levers over because
this one required much longer rods for the section from the handlebars to the
first joining. Honestly rod brakes have been a little bit of a learning curve trying to get
them all set up and working. Oh the sun's come out but yeah no it's looking good it's looking good
so yeah with the sun coming out there hopefully it will stay out for this
you've got the beautiful wine red I'm really happy with how it's come out
I yeah from that painted on blue to the wine red that it is right now it looks
absolutely stunning and I think it should have been roughly a wine red before.
Dynamo lights of course I could get them on we'll have to do a bit more refurb on those lights
here she is now like this video has probably gone on way way long already but I needed to
share it today I needed to get it done it's already up for sale so yeah if you're interested
let me know I'll get that gear cable on get everything bettled nicely so it's rolling along
and yeah shall we leave it there and then go for a ride once I've got that cable I think we will
so I mean if you've liked this woods transformation leave a like comment subscribe
and all that sort of jazz and then yeah well there's oh wait there's one more thing
whoops right here the luck the luck that is the bane of my life I do have a replacement
the old one got kind of smashed out I do have a replacement it's currently in a frame
so I'm gonna have to work that free and fit it hopefully if not I'll make some
bungs and stick them over but anyway beautiful wine red beautiful chrome and beautiful
whitewall tires so I will leave it there that is the Raleigh Industries logo again like comment
subscribe and all that jazz and I'll see you in the next part when we go for a ride touch wood

