Fix cracks in stucco hairline or structural, Caliking large or small stucco cracks

We Can
46 followers
21 Video Views·Nov 15, 2022
good morning folks kirk here with kirk giordano plastering and happy new year seeing that it's
new year's eve today what i'm going to do is show you guys how to do these cracks here i get a lot
of calls especially in the third year of recession now not for large jobs but for small jobs
um i tell folks all the time best thing to use on cracks here is just um this simple stuff it's
acrylic latex and it got a little bit of a silicone in it um what i generally use for my
stucco trades are this uh sikaflex and this np1 both of them are polyurethanes but polyurethanes
you can't really paint they're it's better than this right here but you can't paint it so it's
kind of useless for what we're doing here silicones don't use a silicone either because
the silicone will fill this and won't shrink as much as this but if you use the silicone you can't
paint that either it's silicone is great for a fish tank but it's not real great for this now
what i did is i cut my tip just shy of a sharp that way what i want to do is i want to go in
the crack not just on the surface i want to go inside the crack and i'll show you how to match
this texture by the way this texture is a float finish and somebody came around and did a text
coat over that with acrylic sand because obviously the house was leaking and this is a pretty large
crack here but this large crack is going to continue to come back and that's only because
we're on a huge hill if we were to shoot down you can see we're on a huge hill we got tree roots
everywhere so i'm going to temporarily fix this crack and it'll probably last five to ten years
but it will come back anyhow uh and if i use stucco to fix this crack it's just going to
pop back off and oh i'd say a matter of six months so here's what we're going to do guys
we're going to fill the crack now what i want to do is get inside the crack i want to fill it
completely full not just on the outside you get it just right it takes a little bit of time
just squeeze it in there don't worry about the excess coming off and going to the sides because
we're going to deal with that in a few minutes when we go to do the texture a lot of ways to
do the texture also but i'll show you the simplest way okay we're just we're squeezing this caulking
right inside that crack a lot of people call me and say hey come and do it and i tell them gee
you don't need me here's how to do it majority of people still say i'd prefer you to do it so
i thought if i showed folks they'd get an idea it's not that complicated and some of these larger
ones like this guy here remember we go in the crack i'm holding the tube right next to it and
filling it next i'll use my finger just to make sure i get it in there pretty tight so i'm getting
like that you could tear your fingers up doing this but trying to make a point here just use
my finger and i had a luxury of if i like to throw a little bit of sand on that but i'm not
going to do that this is a very heavy sand finish i'm going to take this sponge float just kind of
dab it now just like that i just let this latex here it does tend to shrink up just a hair that's
why i squished it inside the joint a lot of people will put it on the outside not get it real deep in
the joint get it deep in the joint that way when it dries it doesn't shrivel up too much and you'll
have to redo it this is not the best caulking in the world for this but it's the one i prefer
they actually have a 25-year caulking but it's usually for interiors this stuff here is like
three dollars or two this stuff here is about five to eight dollars or two but again you can't paint
so uh this is this is what i prefer and you just the sponge kind of brings the aggregate out or
bring you just kind of dab it like that and when this is painted you never even know they have
clear they have white they have all different colors but they're going to paint this anyhow so
no need using a clear you never can figure out why why do you use clear there you have it guys
it's it's pretty simple stuff i'm here to do a little bit of stucco work so i tell the folks
i'll fix those cracks for you for nothing but hopefully you can do this too and again i hope
everybody has a happy new year and we'll see you on the next one again this is kirk
kirk giordano plastering for those of you who want to do it but simply don't know how
don't get any easier than this bye
