How to Carve a Classic Snowman -Full Beginner Friendly Woodcarving Tutorial

FreeHands
60 followers
65 Video Views·Nov 7, 2022
How to Carve a Classic Snowman -Full Beginner Friendly Woodcarving Tutorial
We are back with another beginner tutorial this is a this is this is a fun one this is our yearly
snowman and it seems every year we kind of increase the uh the uh skill or the look I
guess not the skill it's still beginner but uh I like this one a lot and it's gonna be a fun
little project and we're gonna add or maybe add a tool or two if you feel so inclined you don't
have to you can do the whole thing with just a knife so I'm using a piece of basswood today it's
two by two by six but I don't care if you do one and a half by six I don't care if you do
three quarter by inch and a half I don't care if you do one inch by three inch doesn't matter the
concepts are all the same it's just the starting point like last night this was my starting point
that uh I started with as a practice and uh learn a lot just show myself a lot and uh our project
today is this fella but that said I'm giving you lots of ideas in the meantime of ways to change
it from sticks to wire to valentine's to hockey to you name it like there's so many options and
if it was uh if it was Christmas it could be a gift you can have him holding stuff you can do
anything you want so like I said very interchangeable project and I want you to make it
your own I want you to use your imagination and uh you know if there's some little facet of your
life that is meaningful incorporate it but uh I'm just here to get you going and uh on that note
let's get going so right off the bat I've got six inches I'm gonna mark uh halfway
and that's our halfway mark and that's what it's gonna be so you got a little square or something
you can mark half all the way around or if you got good fingers you can long fingers you can
scribe it all the way around but I'm just gonna give this rough rough line around here
all right and there you go I'm gonna use uh I guess it's an instant 7-8 OCC tools knife
and uh here we go we're just going to uh come in if you're a beginner make sure you got your
safety equipment on I know it's hypocritical of me to say but it's your fingers all right
so I'm just taking little v-cuts around all the corners
and basically what we're doing is this halfway mark is the neck all right so now we're going
to go deeper and deeper and like I said we're going to come across we're going to join these
two all right just like so same thing around here we can take little bites from each side
come in and then do the middle there's many ways it's going to cut like I said we're going to
introduce some more tools so if you want to take the uh a v-tool you can take a v-tool run a v-tool
across all right that's not going to get you all the way but it's going to give you a good start
all right but anyway that is what we're going to do and we're going to keep on doing it until
we've got a real nice deep separation word it's been a word
all right I want all the sides to look like that all right that's probably about a half inch deep
on a two inch piece but anyway it's just a good a good separation now my head of my hat I don't
want it to be the same width as the body and we're going to round everything but let's say
right across the top here too I want to uh I want to lose about a quarter inch in the sides
I'll do this side here just by taking the corner off all the way up you know and then we'll just uh
if you got a saw you can cut it off all right we're just showing you uh I'm just gonna say
all the options all the time like I said we'll make this as easy as you can a two inch piece
there is a big difference from holding that uh smaller inch and a half piece in your hand
to holding a big two inch piece but it's a little bit harder to hold or you can feel it more anyway
so then there we're taking off a quarter inch off that side now we want to bring our neck back again
right so moving right along I'm going to do the same thing on the other side but this is how this
is going to go I'm going to do one side and then I'm going to do the other side but just removing
a quarter inch to thin the head from the body shape right now we got both sides done like I said
we could have cut it and it's not much it's only a quarter inch on each side but now we have
shoulders a little bit right and snowman doesn't really have shoulders and I should say too common
practice when you do a little man is you want that uh shoulder you want you'd have it uh up on an
angle but it's a snowman so that it's piled up so it's not going to have the uh the same angle
all right so now we want to uh mark our head I think uh let me find the I'll just measure on my
stick here but yeah probably about an inch and a quarter up or so I'm gonna do that and then again
like I said with the shoulder that we don't have the angle the hat we want to have an angle and
we want that hat as part of the head we always the mistake is to have it looking like it's sitting
on top of it but it's actually part of the head so I'm going to go give it another quarter inch
on the back quarter inch lower so now we have that angle right and this is all rough we're just in the
rough in stages right but see that we're gonna have a little angle so now I'm gonna do the same
thing only this time I'm gonna keep one side flat under the hat I want flat even though we're
gonna round the whole thing we're going to uh keep that flat not a not a v not a v up to the hat this
is the under the brim of the hat we got lots to do this is just the basic roughing in area where
it's going to be all right come across anyway you get the idea and come up underneath the
brim of the hat which will be rounded and changed the long knife is nice a bigger piece of wood
all right so there you go I'm just going to rough in the rest of the hat
and then we know where it is see how we got the hat wrapped in nothing is rounded nothing
has changed but now we can go around we can start taking off some corners a little bit of
vertical rounding see what I'm going to do here is on the corner if I come down on a corner
right now I've made two more corners and take those corners off and take those corners off
and keep taking corners off and pretty soon you're round right if I go a little bit heavier
take the corner off take the corner off if you get that little uh see how the grain is pulled
you go the other way anywhere you hit that just do it the opposite way
and soon enough you're going to have around a round ball head
I'm going to go up to the up to the hat it kind of went down the first time
but before we get carried away we got a whole body to do this with so
let's shift back lower do the body all right
okay same thing we're gonna come down just peel it off so on this one here
let's turn around this way not much of a swale but since we got a bigger piece of wood and we've
narrowed the head we're gonna have a little bit of a little bit of a swell here but not too much
okay so it's still just a nice little shape that's what we're going for
all right so we're going to come down the thing so we made two corners
and come take those corners off right and if you do if you peel the
wood a little bit it's okay because you're going to cut this many times
all right
just coming around now we've got a big angle here so we're going to do that swell in
I should note too that let's just do this for happiness sake this is always going to be the
front because of the angle of the hat all right and then we start rounding in the shoulders
down corner this way corner this way
all right another corner corner makes two corners take those corners off
I just had a thought before we get this totally rounded let's find the center of our arms which
but let's come down oh what do we got here let's say I grab the tape measure too
I'm gonna say an inch all right good same on both sides
so an inch down
all right now what I'm gonna do is I'm gonna take my drill here I'm gonna drill a hole
that hole is going to be too small for anything that I'm going to do for the arms in the future
but that has marked where it is so now as I'm rounding my way around I don't have to even
think about that again but where the center is I'm never going to lose where I want the arms all
right but so we're just doing the vertical rounding right now same thing in the back
I think I stabbed myself corner
okay I'm gonna go around to the back rounding it just like the front here and uh we'll start again
all right let's have a look at this so you can see here I've got uh our corners pretty much
rounded there's still a little flat spot in the middle here we've brought our corners
almost to center but not quite that's okay for now but I like the idea of uh visually
rounding the corners vertically before we do the or yeah vertically before we do the other way
all right so the top here we could go a little bit closer to center too same same as the bottom
like try to get that rounding just about to the center of the previous corner all right
it's working the way around the corner
so
all right let's stop for now and uh now the bottom the body this is too sharp of a corner
so we're just going to come around maybe from the almost that inch down again
now we're going to bring it around into that right tight into that line again
so here's a thought see how this one and I'm going to do it on this one too
I took a cut a piece of t-shirt made a scarf right so we're adding different uh different
things to it like it's not all going to be wood I have the broom here too I'll show you how I made
that later but so I cut this out of a piece of a cloth but if you wanted to carve one in
this would be the time when you draw it in and carve that in but I'm not going to do that
but I did that let's see same idea as the coat on the last year's we just cut that in before but
we're not doing that so we're not going to worry about it but it is an option if you want to carve
in your scarf instead of uh instead of adding to it but I like the idea of mixed media now a little
bit more now all the while that we're doing this coming back into that we're also we're creating
another line that we're going to smooth out after I'm not worried about being super neat
and cleaning up all my cuts we're still roughing it in but we're uh we're getting close to
not roughing it in but we got to get that hat roughed in first before we can say that
all right so now you can see we've kind of created this little edge here and now we're
this is where they're a little bit of flat spot in the center we're going to kind of just smooth
that all in there the more knife glasses facets in my mind the better but I'm going to texture
this one after can you see a little bit of that texture in there I'm going to purposely do that
with uh something else after the fact but if you don't have a gouge then you want as many facets
as you can get
we're gonna this is gonna be a little bit deeper before we're done but
but there's that uh there's that hole see how see how that can be a handy reminder after
after rounding all this just be kind of guesswork of the actual center
all right now I can do the exact same thing on the bottom and uh maybe a little bit longer
why don't we just draw a little line around here
I should have sanded the bottom makes it easier to write your name on but
anyway so that's where I'm going to aim for I'm just going to show you this corner here
and then I'm going to do the rest so there again we've created that little edge
and then by the time we're done we should not have any of that flat spot that we left
it'll all be just nice facets all right
all right nice heavy heavier bottom I like it I'm going to do this all the way around the bottom
all right facets are your friends I've got that I don't think I've got any of those little flat
spots left at all so I put a facet on every every little piece of the bottom of this fellow
all right and uh yeah it looks good the paint will uh take different to the
outside edge of the wood that's why you want to make sure it's all cut all right now we got this
hat and we're going to come back towards the hat but not remember we don't want that hat
sitting on top of the head so the bottom is going to be lower than the top or longer
angle that makes sense I want the uh I want this part inside the hat we do come back a little bit
but not as drastic as in the bottom the same thing we want to take off all those
every everything needs a facet no no no continuous edges let's just move my way around
I'm going to get the whole head shape like I said a little bit longer angle on the bottom
because that angle we want that going into the hat it's a rounding I should say we might as well
clean up the uh the neck nice and sharp and go a little bit deeper let's really clean that
nice clean edge all right there you go I will work my way around and we'll come back and uh
while we're doing this on top here too let's let's uh let's make a nice sharp
clean bottom of the hat even though we're gonna end up knocking most of it off but we want a nice
clean clean cut in the bottom all right all right I'll finish up the head there is our shape now I
want my two pet peeves are addressed is that the head goes inside of the hat so if you think about
that ball like that's your that's your snowball all right so just make sure the hat doesn't sit
too high on the head and the same with the the body this head is smushed down onto the body
it's not it's not ball to ball it's it's placed it's stuck it's there it's not going anywhere so
all right we've got our arms marked now something I thought of too would be a good time while we
still have a little blockhead here put your center line on the hat and then uh we can continue that
down right through the body because we're gonna we're gonna put some some buttons and a nose and
eyes and whatnot all right but there you go that's where we're at and uh yeah so like I said
before we get too far the more facets the better and well depending on what how you want to finish
it I'm going to even add even more facets later but if you're just going to use your knife then
that's where you're at so the more facets the better and also uh the hat now looking at this
guy here something I don't like is the hat that's kind of boring it's just straight up and down as
long so you can think of start thinking about hats you can make any kind of hats I grabbed the
pumpkin head here gave him a hat like that okay I'm probably going to go with the hat like that
look at last last year's snowman see that last year's snowman has a little bit more character
in his hat so I want to add a little bit of character probably by uh by tipping that back a
little bit so on to the hat first thing I'm going to do well you pick your hat to start with you can
put any kind of hat on here you know if we had thought about it too we could have made this into
a uh you know that could have been a toque or beanie whatever you guys want to call it
you know the toque I like the top hat idea you make a farmer hat straw hat like I said any kind
hillbilly hat but I'm gonna make this type of hat only uh maybe just just kick back or
sideways a little bit but anyway first things first is you knock all these corners off of here
and all right now on the brim of the hat I'm gonna be cautious and I'm gonna leave extra
meat at first okay so I'm just going to go like this and down all right and obviously that is not
going to be the thickness but this is going to be become a very brittle area and it's very going to
be very easy to break so the rough work we're going to leave extra extra meat and uh try to
avoid that all right I'm not going to give a really super big brim
for all those people who are going to ask me where do you get your basswood I'm going to tell you
uh this basswood here came from more in the states it came from more rough outs than basswood
so if I find you asking me during in the comments then I know that you did not watch the video so
all right and as far as stropping my knife goes I stropped this knife
nice and sharp just before I started so I have not if I strop my knife I will tell you
but I have not touched it at this point
all right so you can see I'm just working my way around getting a little bit of depth
when I'm happy with the depth
and I think I'm almost there I don't want it too too deep
that's the oodles that is oodles let's stop right there
somewhat the same all the way around so I said I wanted that hat to kick back a bit let's do that
too much
I'll look better in a minute so again if you only had a five inch piece of wood
not a six inch piece of wood then uh you have a shorter hat you don't have to have a hat that long
I'm gonna take this over here the hat if a hat sits on an angle like that surely the top should be
somewhat back here so we want to take that off the top
so when you're cutting end grain like that that's uh that's a tough cut but you'll know
that you want to sharpen your knife when you start seeing little white lines but I don't
really have any yet so we're still good still good maybe a little bit of a hollow in the
top of the hat continue to bring it back now I want to come right from that bottom corner
but I made a mistake in the fact that I'm finishing down to that edge but I want to uh
I want to get that thickness so I'm just going to split the difference here
I'm going to run that
yeah so we have we have a thick edge and we just split it in half I do not recommend ever
coming down to a wire edge because that's just so brittle and it's such an easy place to break
right that's what we want on that side the same thing I'm gonna split the difference
now it's a little bit droopier
right
all right let's get that in there
we could bring it to one side or other
now let's stick with that let's just give it lots of character
so
see that we don't want any of these flat spots
corners off get that saw mark off all right that's a funny looking hat
so how are we going to fix that thin it thinner down a bit on the side
now we're coming back funny looking hat
so
this little folds here and there
There's one on this side. Make your hat your own. Do whatever the
Same hell you want, right?
There's no rhyme or reason to this one. That's for sure
You can put a little buckle and belt idea on there
You know what?
Some character here
Wrinkles and folds
There we go
All right, if I change it I'll change it off-camera
I'm not doing any thinking. I'm trying to trying to film and think in the same time
Not easy for a man like me
All right, let's leave it. Let's leave it alone
Call her a hat for now
One thing it could do a little bit of a little bit of an upturn
See what I'm saying?
A little bit of a
What do you call that? What do I call that? What was it? What's my word?
What's my word? Curve! I want a little curve. A little bit of a curve for the hat.
So now just by going underneath there
Here and there I'm taking away that sharp edge
Then I said I wasn't gonna leave and I did leave a little bit
But we're just just kind of beating up this hat a little bit. I gotta leave this hat alone. Move on Doug
Leave the hat alone
right there is
our body and our hat
I talked about
Options and how you can change it up to really make it your own and for now
This is where we're at and we've got lots of good good facets on this one. I'm not
It's actually too good to do what I want to do with it
But lots of facets that are gonna catch the paint
So I'm not going to show the painting of this because you can paint it any way you want and you can go back and
Look at even dry brushing and I think I will probably end up dry brushing the white
I won't have such a dark color behind
But I'm gonna dry brush the white on and I have videos on all that stuff
In fact, I just did a video on painting Groot where I kind of show some other techniques
but what I'm gonna do with this guy is I'm gonna take a
Gouge and don't get caught up with the numbers or whatever the size is. You don't want a medium-sized tool
you probably want a palm tool if you have a palm tool just a
This is a number seven
Yeah, this is a number seven gouge and
But like I said any flatter gouge, you don't want to go too deep, but I'm gonna take that gouge and I'm just gonna go
I'm just gonna pop
extra facets on the whole thing that I just carved
I'll bring you down
just to show you what I'm doing here, but
of course
I'm not going to
go too crazy with the
You can go rough. You can go rough. You can go lines. You can do anything
You can go the other way and just make it like really rough
but I'm gonna get you down to my level here and I'll show you what I'm doing and
Then I will just go on and continue to do it because I'm making this one for me
so I want one that's different and
Like I said, you know, you see pictures all the time and a
Lot of my tutorials everything looks exactly the same
And I want everybody to start
my goal this year is to teach people to
Not to be rude. Not that like I say to think to themselves but to change things and to make them yourself and
Make them your own and then you can be
Me proud to call me wrong, but that's the texture that I'm going to so I'm gonna bring you down for one minute
So I'm just staggering
And they're gonna really be picked up with the
Since I'm gonna dry brush them the dry brushing is gonna catch all these little little high spots
So does it make a big difference nope
but just one extra little step that you can do to
Maybe it maybe it gives it a little bit more traditional look
Or what is traditional right, let's see that how that's accentuated
and then
facets, right, so I'm gonna go ahead I'm gonna do the whole body like this and then I'll come back and
We'll pick up from here
But before we do that
Let's do exactly what we did for our arms with our buttons and our nose. So
No-brainer, I'm gonna put the nose
These are my eyes. Let's put the nose
like so and then hum you can put it however many buttons you want, but since I'm gonna have a scarf here, I
Think three buttons is gonna be good enough
so I'm going to take a
smaller
drill bit again
And then I gouge them off
But no matter and no matter
All right, I'll be back
right, I
Think we just about got it. It's funny even with the gouge you can start to make patterns
I like it. I really like that
I
Did take a minute and I kind of play with the hat a little bit more I couldn't
Don't like it the way it was
still don't love it totally but
We give it some direction anyway, it's kind of flopped off to the back side
There we go
There's our
texture, like I said don't have to do it, but this one's mine and I
Want to do it. I really want to see the dry brushing of how the dry brushing is gonna pop on there
one thing that says that you're a super beginner like I used to always do I
Would caution you to or ask you to go watch some of my painting videos
I probably got two or three of them now and I do do things different all the time, but
earlier
snowman videos or
earlier
Carving videos. I tended to always
Paint solid. I don't paint solid at all anymore. I just use the craft store paints. I like to
To water them down now. I don't like to
Paint solid. I think this gives you that just a richer a richer look more
folk art even
Then
There is our textured up fella
Okay now
You have seen like last year's snowman. We did our eyes cartoon eyes and we carved the nose in today
we're going to I'm gonna use just a dowel and
This is my little board my dowel and my corresponding drill bit. All right, so
From that I'm going to
Pop the nose in but before we do that
Like I said, I'm not gonna do cartoon eyes
I'm gonna do very very simple eyes and let's say those eyes are here
I'm just gonna take but a little bit of a deeper a deeper gouge. Maybe a number number eight number nine
Let's go number eight. I'm just gonna put a little
little thing like that
And that's it and I'm just gonna paint those on there a little black dot and a little white
black and white dots
That's it. All right
so in the mouth
both I'm going to
Just carve in a big happy smile, you know, another idea for the mouth would be
Buttons you do like five five buttons, which I'll show you in a minute
For now
Anyway, I'm just going to
Stick my knife in there
so
The other way I don't want it to be too
Open just putting a mouth in for most sake
And in the end, I'm gonna put one little cut down
Take just a teeny tiny little chip out of there. See that?
on this side
Things gonna stick it in and I want to take just a teeny tiny little chip. That's it. That's my mouth
Pencil marks
Very very simple
But it's a mouth
Okay, let's punch in the nose
All right. We got our hole mark. So now before I do that, I'm gonna just take that little fuzzy over there
Drill
Now I don't
My down I don't try to put glue on here because it seems to
Affect the paint after so if I just put a little bit on there
It doesn't take much probably if you got your drill bit, right a friction fit is
Yeah, you hardly even have to glue it
There there's the nose
Pinocchio a snowman
All right. Anyway, I'm just gonna cut that
And now we'll just shape it
Again you don't want a super sharp point, but I mean we just wanted to look like a carrot so nice
You know those the dollar store is amazing like I buy all these little
Dowels the other day. I had showed moss
Glue and paints and whatever you want
If you have a dollar store nearby
Well, I know the American ones are even better than the Canadian ones, but basically
that's our nose and it's a
It's gonna be highlighted because I'm gonna paint it like a carrot. So it's gonna be orange. All right
so now moving on to the
the buttons
Change the drill bit. See I went a little bit again
Don't have to this guy has the same size dowel for the nose as the buttons
But I thought his nose was a little bit a little bit skinny so practice is how we change things. All right
A little bit of fuzzies, but I'm not gonna worry about them at all. Okay
Take our glue again the same thing
Push them in a little bit of glue mainly on the bottom stick it in
In
All right
We got okay, so we talked about ways that we can make this our own now one way is the arms now
Remember our old pumpkin man with the wire arms
Well, that's what I ended up doing last night and you'll remember how I took the three wires and I twisted them in the drill
And
The broom I've added a broom on this guy and that's just a dowel with some
Some jute twine stuck on it and I made another one with a stick earlier this morning just to
show you how I do that and basically just cut the cut the string and
Wrap it and lots of glue and buzz it up. You've got a little makeshift room
Something else I thought of too was
someone asked me if I was gonna do anything special for Valentine's Day other than what I've already done and
I do have videos on Valentine's carvings, but let's take these wire arms again, and I thought what if we
Will up a little heart and then by taking that little heart we can make our snowman
Bend those arms around and he can hold that little
Little heart that'd be kind of fun. All right, so there's another option for you. So anyway, like I said
Many options you can make a hockey stick and give him a hockey helmet for a hat
There's so many options you can do
But what I did this morning was I went out in the yard and when looking for some sticks
so
so for my
Project I'm going to give him traditional branch arms
Let's uh, let's work on these sticks instead of the wires
So on my stick hunt what I'm looking for is I want a stick that's gonna give me
Fingers yeah, there's our claws on that fella
There's a
Like that I like that what else we got here
These are brittle super brittle I
Just want some semblance of
Fingers
There we go again try and find something that
That has a hand shape and now like I said before too is I put those holes as a marker
To fit whatever you use whether that be wire or sticks or whatever, but on the same hand, too
They don't have to be drilled straight through the wire is nice to pull right through the body and then you can bend it around
the body but for these
Like I may put one hand down
You know, so I might angle that hole up or I might make it straight straight out. Okay
So it's up to you how you want to do your thing
If you found a perfect stick that had a little curl in it, you know
put it just you know make it to get it out in front and then the
like I said, I'm gonna do the same way deal with the scarf, so we're gonna have the
Scarf tailing down each side and then these sticks are gonna be either just a little bit out
Or down or however you want to do it. So there we are at this point
I'm not gonna put the sticks in until I have him painted and I'm not gonna bring you along for the painting
but I will bring you back for the finished product to show you how I did the arms and
Yeah, so like I said, you can do wire at a broom at a heart at a hockey stick and
whatever you want, but I'm gonna go and paint him right now and I'll show you the eyes and the
I'll bring him back finished as well do and
I'll be it. So
All right time for the big reveal
Here is our our snowman. I wish I had something to do this
Here is our snowman
I like them. I like them a lot. I like the texture what I did was I took a piece of
Felt and just cut a piece of felt
for the scarf and I used the twigs obviously for the handles and
Yeah, just dry brush that
the texture dry brush the hat
Well, I painted a very light brown nice dark brown highlight it with darker brown and then use some white on there
but
Yeah, I think he turned out. All right, and like I said, this is a beginner project
I'm sure that anyone can do it. But again make it your own
Use the wire use the broom use the heart for Valentine's do whatever you like hockey stick helmet
you know just your imagination is limit and
Yeah, have fun with it and make it your own. So
Hope you like this tutorial. I was a little bit shy on the tutorials lately
So I thought I'd give you another one just to to see if you guys are still interested. So
We'll see but anyway again, thanks for anyone who bought me a copy this week
I always appreciate it never expect it and until the next video, whatever that may be. I will see you then
Later guys
