OG MURDER NOVA CATASTROPHIC FAILURE! NOT SURE WE'LL MAKE TO SEASON 2 OF AMERICA'S LIST NOW!

Traveling on Wheels
7 followers
4 Video Views·Nov 7, 2022
Today we're headed to the track one last time before America's List with the OG.
Man I don't know what's wrong with my cameras or my camera that I usually use
for this type of stuff. However the past three SD cards I put in it eventually
got the SD card error message. At first I thought maybe I just had a bad batch of
SD cards. I don't think that's it. So what I'm trying to say is we did a big nice
video of getting the OG ready. We changed the third member in it. Put a
different gear in it. We went from a 430 to a 457. I don't know. Should work out. We'll
find out today. We also, you've seen the dyno video of the OG. On the way home we
blew up Sean's Duramax. Bad luck in 2021. So there were a lot of you in the
comment section. Get a F-350. Get a F-350. Well little did y'all know we'd already
bought an F-350. Different color than what we normally go with. It's black but
we got it for a good price. Still expensive. It's 2018 all-stock. The
previous owner did a mild leveling kit on it with some spring spacers there.
These things ride amazing. Whenever Dave pulled the OG home after we broke down
in Sean's Denali, I rode with Dave and man that thing, his truck was super
impressive. So Sean got to looking on Marketplace. Searched four or five days.
Found this one and we bought it. Our initial plan was to take my dually to
Fat Fabs. Take my dually to Fat Fabs. Get a helper bag kit installed and notch it
so that we could tow the gooseneck without any trouble.
Sean's just not cool with not having his own truck. So found this thing. It's
amazing. It's just a work truck model. Just the XL. So it's got the rubber
formats and everything. It don't have the seat massagers and all that.
We did get some amp steps put on it because this thing is up there. So these
things are pretty cool and make it way easier to get in and out of this monster
truck. Because these things ride so amazing it means their leaf springs
just they're not quite as heavy-duty as like the ones on our Duramax. So what we
did was called our buddies at Summit. Got a Firestone helper bag kit and we
bolted that deal on in less than an hour. Super easy. It's like 750 bucks from
Summit. Comes with a compressor, gauge, switch. All that good stuff. Like I said
we did a video showing all this stuff and I lost all of it. I mean hours of
content is just gone. I can't recover it. I've got a program that's pretty good at
recovering stuff. It didn't work. So there's Daddy Dave. He's always showing up.
It didn't work. So I just lost that content. So here we are. This is a last
test day at the track with the OG. We got it loaded up. It's ready to go. So once we
get to Thunder Valley we'll turn these cameras back on and see how fast and
slow we can make this thing. Test session before America's list. What we
gonna do? We're gonna try to go fast and then we're gonna slow it down and try to
go slow. So mentioned we changed the rear gear net. We went from the 430 to the
456. Still has the 136 blower on it. Same gear set that we had on the dyno.
We picked up 500 horse on the dyno. Well yes and then he made changes to pick up.
Every time he made a pull on the dyno it picked up 150 to 200 and then after it
made the 2350 he made another change and he said do you want to dyno it? He said
it should pick up. It should pick up the same. Yeah. You know and I said no. So
probably picked up a little bit more. What are you gonna do when this thing goes out there
and goes 4.0? That's what we're gonna try. We're gonna see how fast it'll go this first pass and then after that we'll try slowing it down.
I mean if you need to stand outside and watch the car for any reason just let me
know. I'll jump in. You can watch it. I'm here for you. I'm here for you. Keep that
right here. I'm here for you. I'm gonna keep that right here. What do you think
about your new tow rig? I think, I'm not even gonna say it like that. I like it. I like it. So in our comments, the only reason I'm asking you this again is
because I lost all that footage yesterday. It's just it's just gone. I
couldn't recover it. So showed him we put the airbags on it. We got the amp
stips put on it. God dang Dave's got a whole entourage rolling in here with
him. Yeah he does. Yeah. So this is the first time we've really hooked on to the
trailer with the car in it and man it it's nice. I like it. It pulls good. It's
like it's not even back there. Yeah. Like and I know I say that about my truck too
but it's different. Yeah. This one drives good. It rides good. It's not the same. Yeah. So it it's a
nice truck. It is. Very nice truck. So we are here. We're we're here at Thunder
Valley. Like we said this is our last test session before we head to America's
List. So we're gonna see how fast we can go and then how slow we can go. How slow we can go. So
stick around. Total opposite of both. Yes. So first couple passes I don't really care. Like I said if the
thing runs 20s we're done. We're gonna start slowing it down.
We did that at 18. So yeah I don't really know. We're probably ideally I'd like to
make two passes and get a teen and possibly a 20 and then I know man what
are you gonna do? I I what are you gonna do? Hey at some point man whenever you
blow up so many Duramaxes you got to swap and do what ******* everybody else
is having good luck with. Like Dave loves his. Ryan loves his. Chuck loves his. I
mean hey I pulled that thing. This is the first time I pulled with it. It's pretty
******* amazing man. I hate it. I hate the fact because dude hey I'm I'm bowtied
till I die you know. But what are you gonna do? You like the Ford? No no. I ******* love the C.
I'll be honest with you. I'm already at the point right now where I should have
bought a nicer one but man I'll never buy something. I'll never buy something that
is top tier. I don't know if I like it or not. So I found this one used. I feel like you could sell this black one.
Oh I know what you feel like dude. A white one. I know I gotta have a white one. I found this one. It was what I found. It is what it is you know. You said you would never sell yours. I promise you I would never sell it. He will at some point.
But when I'm done racing I don't need it. So I pulled that thing. This is the first time I pulled with a loaded
trailer and everything. It's ******* amazing man. Like it's nice. I pulled my Open the other day but you know
of course it just had the 55 on it. It wasn't a whole lot. But now we put the airbags on it. It's nice.
Did you look at any of your gauges? Like all the EGT's and training temp and all that bullshit? No. Me neither. I love it.
I couldn't really tell that the trailer was even back there. Like I was only probably doing 80 on the way here because we were going through traffic.
But I mean I know riding home with Dave after the Duramax blew up I was super impressed with that truck.
It just goes man. I know. What are you going to do? You got to go buy a nice one. What are you going to do?
As soon as you can. Yeah. As soon as your bank tells you to go ahead and show up.
So we've made, this will be our third pass. Between the first and second pass you heard a knock and the burnout.
Pulled the valve covers off. Checked all the rockers. They were fine. Yeah because normally when that happens we change a couple pushrods.
What do we feel? Yeah. Well it wasn't the pushrods. It wasn't a rocker. We were about to send it. It's fine.
For the record I hate sending it whenever we don't we never found a problem. Right.
Because I clearly heard it knocking. I just happened to kneel down. I didn't tighten up the pushrods though.
A little. I tighten them up a little bit. So just happened to kneel down in the car
and seen a bunch of metal shavings or aluminum shavings. It clicked. Converter bolts were loose.
They were loose. We got it. We just pushed it back over here. We didn't make the pass.
Got it up on the pro jacks. Tightened all the converter bolts. Now we would never make a pass
if we knew that the car wasn't 100%. Ever. Ever. If these cars weren't 100% we'd never make any passes. Yeah.
So we got that. What'd it go? Like a? The last pass I went a 25. Well on the second pass I went a 30.
30 flat. Come back over here made some changes. You actually put some rear steer in it or took
it out? I put some more in it. Put some more rear steer in it. And then the car went straight as an
arrow. 425. 169. 169 mile an hour. We're still real light early. Yes. We're only leaving at 5,000
which I know that sounds like a lot. The last time we were here we're leaving at 5,500. Yeah. So that'll
put it in perspective a little bit. Yeah. We're still real hard on the traction control early
and that's just jerking timing out of it. So this last pass we, this is the last pass. Like we're
done after this pass and we wouldn't have moved all that traction control up quite a ways out of
the way. Yeah. So it should, if it moves it'll go pretty fast this pass. Oh yeah. So and also to make
a long story short this is not our last test session before America's List. No. No. We need
some fast passes and then like we said we gotta slow it down. And we're thinking to slow it down
to what we need to slow it down to we're probably gonna have to change to put the smaller blower
on it. Yeah. I don't know if slowing this blower down will work for what we need. Yeah. Yeah. So
that's kind of where we are. Car's about ready to go make this last pass. Just letting the
transmission cool off just a little bit more. I don't know. I'm kind of hoping we see a teen
out of it. I'd like to see sub one second to the 60. Yeah. That'd be pretty cool for the OG. I 100%
believe that a couple more passes and we'd have it. It might go this fast. Yeah. Track's decent
on the starting line so you know we got that going for us. So I guess we'll go over here
get the training cooler off and get up there and make one.
So that wasn't our last test session. Come to find out.
We made a good one on the last pass. Went one flat 270 something. After the pedal. Yeah. It
was it was fast. However converter was still too tight. Way too tight and the converter were just
we thought we could do some stuff to get there with where we were and we're just not going to
be able to. And then upon further inspection the converter was broke. It was. I'm glad we took it
home and pulled it apart because it could have been a lot worse. So because the converter was broke
we got it out. That 10 ain't fitting under there. But we know warm the lash right now is 15.
16. A tight 16. A tight 16. So what? Nothing. What? What was you gonna say? Well when we checked it
on the dyno it was 10 cold and 18 warm. Yeah so then I made them 16 warm. Okay. Tight 16. So it's
probably gonna I'm gonna have to go in here and get my like eight or something. Hey and then from
then on that's what I'll leave on that. I'm cool with them being 16 at at warm. We've never really
done it warm until the other day. Yeah. Now I know. So I just did it at 10 and that's why they're so
loose at warm because they were 18 and if I miss one of them 20 and that's probably why we've been
hurting push rods. So if I keep them a little bit tighter they may not get a run at it.
You know? Yeah. Does that make any sense? Yeah. Okay. That's just the way I'm making sense in my head of it.
I don't know. My ---- I tighten it down and go run it. So I don't know nothing about lash.
Gear lifters do that. Yeah. They make their own sponge. So we got home Monday night and didn't do
----. We got the car out of the trailer Tuesday night and found the converter was broke.
I hauled ass and uh got our converter fixed. Yes. Yesterday. Got it put back in last night
and we're here at the track fixing to make some more.
Yeah. Just putting laps on these. Oh there those are. I don't know whose these are. Those are mine.
Oh. They say zero zero seven on the back. I got those like gap spark plugs.
Oh that sucks. What? They're they're all way too big. No. It goes down to like
they're just all mixed up. Oh. There you go. It does.
Why? How the **** are they mixed up? Oh you know. I got the ones that I need where I need them.
So yeah. That's where we're at. We're here at Thunder Valley again.
We got a looser converter. The loosest converter we've had in the car so far
and uh fixing to see where we end up.
Okay. So car's ready to go. A new converter. Fresh fluid.
Ran the valves. Make sure they were all right. Shawn's strapping in the car and then he's
fixing to roll up here soon. So uh we'll see see if we made the right move or if we're going
to be changing this converter here at the track. So it's coming up shortly.
So
a good sight after a pass. Well running valves. Well I missed what you did before you're running
the valves. Yeah. Push rods. Got on the radio after the pass. Said it was noisy so I had to
come down and get you instead of driving it back. Yeah. I said we got a push rod. Yeah.
Well you said it was knocking but you know I didn't want to go there. I used to always
want to get out after a pass and go yeah got a push rod. You know after you've done it so many
times. Yeah. Like you know. So. And now we know. This is what we mean when we say got a push rod.
We don't know why it's happening.
So
so 2021 wasn't done having its way with us just yet.
We broke the motor on that last pass. Loaded it up. Just got it here to the house.
And I don't know. I guess we'll get it pulled out. Get it pulled apart and see what all is
broken there. We're not in the best of shape. It's Thursday. We have to leave for America's List
Tuesday. So five days from now. And we have a broke motor. So. Yeah. We just know it's broke.
So it's not good. We don't know. Like I said we don't know what happened yet. We don't know
what all is broke. But it's broke. I know it's broke as soon as I felt it. Like we've had
rods come apart. I 100 percent do not believe that this was a rod problem. I think something
else happened. Yeah. And we'll know whenever we pull the thing apart. I don't know what kind
of problem it was but. It's a problem. It's a problem. So. I guess we'll see how easy this
thing is to get out of here. Yeah. I mean we've been getting a lot of. A lot of fish rods. Like
I don't know. Something's just not happy. So we're going to rip this whole thing apart. And
these rods. I mean we kind of did the math on everything man. And these rods. I mean honestly
they should make a thousand or a hundred passes in this deal. Easy. Pretty easily. The last motor
had what 50. This last motor had 75 passes. 75 passes on it. So something else happened. Yeah.
It's not like we put a new set of rods in it and they weren't as good as the last set. Right. You
know what I mean. They're. These are good rods. And something had happened. You know. So we'll
pull it all apart. And figure it out. So. If you want. You start draining that and pull off the
foot. I'll start pulling the headers off. Yep. Yep.
It's pretty safe to ******* say that it dropped that valve first. So that piston. That's not a
custom fancy design in there. Like this is not attached to anything. This valve hit it.
And did all of the damage. At least the sleeve looks okay. You know what we can see.
Yeah thanks. As soon as we get to the bottom side of that piston. It's probably not going to.
I mean you could probably bump the motor again. It might throw that piston out. No. Because remember
this guy. Oh yeah. This guy. Just hold it to a stud. No you hold it to a stud. It doesn't reach
up here to me. Isn't that what all the old dudes say. The stud finders. The stud finder. You gotta
touch your stuff first. Yeah. Okay so. The valve broke. Hit the piston. Broke the rod right. It's
what we're. That's kind of what I'm going with. I think this side. You got your big ass. I 100%
believe that. Yes. Because you don't break a rod after. Yeah. After 26 passes. I mean. Especially
when the 26 passes a 540. Some people do. Like we have. It's not like we haven't before. Yeah.
Just saying that's not what happened here. Oh we're doing that again.
Oh yeah. It's just teeter-tottering. Where's the other one?
So now the process of getting the heads off is rather interesting. This is the worst
thing ever to get these heads off.
Okay well. Monkey can you get to that to knock this piston out? That's it right there. Go ahead.
Piston was installed upside down. Yeah that's what. That's the whole problem.
That's the whole problem. Oh I need a longer one. Hang on. You're good. I just had to get it at a
point. Struggling. Oh yeah it cranks. This will be on the right side.
Turn it over. Oh yeah. Even that other. That rod is. Yeah. Looks like it's got it.
I mean. Kind of looks like you could turn it. I mean of course we won't ******* know but.
Monkey. I can't see ---- in there. I'm gonna. Let me. I'm gonna turn this until it's up.
Look in the cylinder monkey. Yeah. See.
That's the biggest issue right now is if we're gonna have to buy a crank or not and I've.
Like I said. How many times we blow up the. Twice. Three times. Three times. Three times a lady.
There's a lot of. There's a lot of transfer. That's what it looks like. Well there's a lot
of ---- missing out of the cylinder walls. Oh yeah. No it's. It's. Blow it up.
That's a pretty good gouge in it. Go back a little bit.
Pretty fucked. Yeah that's a big old dent. I mean. I've seen them weld them before. I know.
By Tuesday. Yeah. Damn. I think that place is up in Denver too isn't it?
Mile high. Yep. Here in just a little bit.
Man. Well. But we won't be able to get this one fixed. Like we may be able to get this one fixed
but not to run. Like after they fix those they gotta nitrate them and all that ----.
Like they gotta go through the heat treat process and all that again. All of mine have anyways.
I don't know. I mean I ain't no professional but that's what I was about to say.
Not one to judge another man's crank but this thing looks bad. Yeah. I mean it doesn't look
great. This cylinder doesn't look that bad though. Just at the top. Not like up in here.
I'm just not sure how much material it's supposed to be. Yeah. I think it's broke off. Supposed to
be gone off that screw. I don't know. I would imagine that we need a sleeve. What was that?
Bearing? Bearing. It was all black. If you look at the bearing in front of it actually you can see
that it's got a gap in it too. It was chewing away. Which if that one was starting to seize up
it could have been transferring through. Oh yeah. I'm sure that whole deal was hot.
All right well let's uh I'm gonna shake that pan out and uh at least put the pan back on
it so that it'll sit flat in the bed of the truck. I'm gonna give this thing a couple of
ease when I put this deal back together. Oil pressure ain't what it once was. Well
I guess that's it for now. We're gonna get this thing to our engine guy in the morning
and figure out what needs to be done from here. Yeah.
