We Got A New Bullet For The OG Murder Nova! 540ci of READY TO ROCK!

Traveling on Wheels
7 followers
35 Video Views·Nov 7, 2022
What's up everybody, Phantom here. As you seen in our last video, we're kind of screwed. A couple
weeks ago we blew up a small block in the new car, and then we put the OG back on big tires,
took it out this last weekend, and on a third pass we just totally destroyed the big block.
So we're in a bit of a bind. Pretty much right after it happened, Sean got on the horn,
started calling everybody we know to see if they had anything we might be able to buy from them to
get this thing going again. We found a few people who had parts laying around that we
could have taken to the machine shop. We just don't have time for that. So I finally found
something. One of the guys at Proline messaged him and said he had a customer who's got a motor
ready to go. So we jumped on it. It was about two o'clock yesterday afternoon.
We were on our way home, and they dropped me off in Memphis. So now I'm here at the airport
fixing to fly out to Philadelphia and pick up this motor and drive it back home. We're going to get
it put in the Murder Nova so we can be back out racing again this weekend. So as soon as I get
to Philadelphia, I will check back in, show you guys what we're buying, and kind of keep you up
to date on our road home. Alright, well, I've landed here in Philadelphia after a short battle
with the rental car company. I have a Tahoe, and I'm headed to pick up this new motor for the OG.
It's supposed to be a pretty sweet piece. Sean's talked to the guy. He showed me the details of it.
Looks like a good deal. So as soon as I get there, I will pull this GoPro back out, and we'll
check this motor out together. So stick around. Here it is. 540 cubic inches of badass.
Got this motor out of an Outlaw 10.5 car, and it has been fast. We're talking 390s in the 8th,
6th flat in the quarter mile, and has been 250 mile an hour. So it's definitely a nice piece.
It's a 9.8 inch deck, new century block. It's got AJPE billet heads. It will be dry deck now,
so we'll actually lose quite a bit of weight here. You know, you figure probably 100 pounds
in just the block going to aluminum from iron. We won't have water in the engine anymore,
so we'll lose quite a bit of weight there. It's got a sweet billet intake. Unfortunately,
to get it running this weekend, we aren't going to be able to use it because it faces to the front,
and all of our setup faces to the back. So this is it though. The new bullet for the OG Murder
Nova. Man, it's about time we put a real nice piece in that car. It deserves it. So I am going
to shut the hatch on this Tahoe, and I'm going to roll west towards Memphis, and we should be
meeting, I believe, Jeff Lutz somewhere around there, and he's going to help us stuff this thing
in and handle any fabrication needs that we may need. So stick around. I got about a 14-hour trip
ahead of me, and then we're going to shove this deal in there. Yes, sir. I don't know if Thompson
made that one or not. Yeah, it's a Thompson. Oh, this is a Thompson, right? Yeah.
No, it's got a button up there. All right, everybody. We have united the car and its new
motor, or new to it. It's not really new, but new to it. We are here at Jamie's Discount Muffler
and Auto Repair in Olive Branch, Mississippi. They've been kind enough to let us kind of set
up a home base here so we can get this thing put in. Sean is getting all the front accessories put
on it right now, and then we're going to drop this thing in in between the frame rails. What
do you think, man? It's the first time you've laid hands on it. It looks like a nice piece, man. I
mean, it's obviously not going to be a deal that we're going to just sling in there and fire it up
and go race it. It's going to... Mine's not this nice. This has a lot of stuff on it that mine
doesn't have, and so we're going to change some ----, you know? Sir, this is yours now. Okay,
I get that. It's a nicer piece than what the OG's accustomed to. No doubt. No doubt. No,
the OG's never had an engine this nice. So, I mean, this thing's got billet heads on it. So,
we have to figure something out with intake. We got to spin it around. I'm hoping that... See
these bolts right here? I'm hoping that we can unbolt this and this whole deal will flip around
is what I'm hoping, and if so, we're in business. I mean, so far, so good. My inlet's coming from
the back. This one comes in from the front. And it's way bigger. And it's way bigger,
and not to mention everything. All the little stuff is going to be different. The throttle
linkage is going to be different. Everywhere that everything plugs in is going to be different. All
my vacuum lines are going to have to be longer to run up here. All of mine run into, you know,
to the elbow, you know, which is right here in the middle.
There's lots of stuff. All my oil feed lines are different. I mean, luckily,
at least the motor plate bolted up. Motor plate bolted right up. There's some stuff that
isn't going to go back. We can move this. It's not a big deal, but it's a whole bunch of little stuff,
and we are supposed to race it in... What's today? I think Wednesday. Today's Wednesday. We're
supposed to race it Friday. You know, luckily, we're... Man, I hate to even say where we're at.
I hate to even say that we're in Memphis, but... I mean, honestly, we're in Olive Branch, Mississippi.
Okay, we're in Olive Branch, Mississippi with the fastest guy that was on Memphis Street Outlaws,
you know, Jamie, with the killer cab, you know. Luckily, he's got a shop here. This is about
midway. Once we blew my ---- up, we were lucky enough to holler at him, and he let us
store the car here. You flew to Pennsylvania. The east side of Pennsylvania. I flew to Philadelphia
and picked this thing up in Darby, Pennsylvania. And then drove back here. I drove home, got
all the pieces, parts, anything extra that I may need, and then we met back here. We've got a couple
of days. Tomorrow morning, Jeff Lutz is in the area, so tomorrow morning, we are going to...
Hopefully, we're just going to stab this thing in. If we get this thing stabbed in, get the converter bolts in it,
get the bellhousing bolts on it, it's going to bolt right up. So, we can do all the little ----
tomorrow. We ain't going to get it done tomorrow, but... Hey, he did tell a story a while ago. Yeah?
He said it's obviously something he can't just sling in here and go race. I can't. But it's
Wednesday, and he's racing Friday, so he's going to sling it in. I'm guessing that it's probably
not going to get raced this week. It won't be for lack of effort, though. Well, I mean, it is what it
is. I'm not... I couldn't afford this thing in the first place, so I damn sure can't afford to go
tear it up. So, I'm going to go wave, smile at the people, let the kids sit in the car, you know,
and do what I can do. Cheer on the rest of the 405 guys, you know? But up until then, we're getting
this thing in the car. We're going to get as much done as we absolutely can. No doubt. No doubt.
Like I said, Jeff Lutz is here. We're going to sling it in. Lutz is going to yaw yaw some stuff.
Yep. The biggest issue that we're going to have is this is a 9.8 deck. The old one is a 10.2.
The headers aren't just going to bolt right up. There's going to be a little bit of a difference,
and that's when Lutz comes in and yaw cuts everything. Lutz and then our boys at
Stainless Works sent us a bunch of brand new stuff so we can build new headers. And when you got Lutz
and Jeffrey, they're going to make some ---- happen. And they're going to yell at each other,
and it's going to be funny. Yeah, it's going to be pretty funny. But the cold side has definitely
got to be all changed, and so does the hot side. This is... I don't even know a throttle body that's
this big. That's a big boy. It's like the 125 or something. Ours is the 105, but this is like a 125
or something. So, I'm not real sure what we're going to do about that. I may be ordering...
It may be easier to just order a 125. Damn sure it won't be cheaper. I'm sure that they make some
sort of... Damn sure it's going to be the cheapest route. The cheapest route is for Lutz to yaw that
deal off there and weld a new one on. I don't know, man. This is a nice piece, and so I want
to take my time with it, and I want to make sure that everything is done right. There's a bunch of
stuff that this thing obviously has that mine doesn't. This deal right here is awesome. I am
not going to mess the camsync up again. I promise you that. So, this is what we actually had trouble
with last week when we tried to start the car. The camsync was off. Yeah, this is a fixed camsync.
It is what it is. You tell it what it is on the tune, and that's what it is. That's what it is,
just like my other car. So, I'm hoping that my valve covers fit right on here. It's a big block
Chevy. They should. They look exactly the same. Just because the heads are billet don't mean anything.
My coils are on there, and my evac system is not like this. This is like the new car.
I need to adapt everything from this to what this is because all this is nicer.
So, it is what it is. Hopefully, like I said, this thing is going to come right off of here.
We can flip this deal around because this is a nice piece, and I don't know how much of this
is going to hang out the hood, but this engine definitely sits higher in the car than what the
new car does, and that's the reason we got a flat hood on the new car, and the elbow was sticking
out of the OG. So, we're going to start flipping, and twisting, and sliding. Well, I see a problem
back here already that may keep us from putting it in. There's no dowel on the back of the
transmission, and I don't like that. I can go and get it. Luckily, I went by and I took everything
off. There's no what now? There's no dowel on the back of the- Oh, yeah. That's a problem. Yeah.
Somebody should have noticed that. I FaceTimed you. That's your fault.
Luckily, I went and got all this type of stuff for the oil sending unit, which is right here.
Mine will just go right in there. This right here is what I'm assuming that they fed their turbos
with. I don't know what size this is. I'm going to have to pull this off and see if ours is the
same size. It'd be nice if it was a dash six. I feed my ---- with a dash six. I'm not sure what
this is. That is definitely a dash eight. It's a dash eight. I don't need a dash eight. So, there's
another problem. I don't need a dash eight to feed my turbos. I don't really know who does. Which is
crazy, because they have the same turbos we do. We're probably wrong. We've never hurt turbos.
Man, why do you say that? We haven't. ****. We're going to hurt one this weekend. No,
we ain't. This thing ain't going to start. As long as you don't hurt his feelings,
I'm going to be mad at you. Then, I honestly don't even know what this is.
Do you have any pieces to your other motor? Like what? Like the intake.
I didn't take any of that. Hey, I brought it. That one ain't going to fit. It's not going to
fit. I know, but Lutz says he knows how to take care of it. Yeah, I bet he does. I believe in
Lutz. I believe in Lutz. Lutz can make some ---- happen when most people can't. So, as of now,
we're just going to kind of figure everything out with it. Figure out if we can at least get it in
the car. Then, like you said, we'll figure out all the little stuff and go from there.
And then, once we lift it up, I'll move this and then we just...
All right, show us that knot, man. That knot got me nervous.
We're going to pick it up about this far and let it sit there for a second.
He said that's right. We're going to let it sit there for a second.
These guys told me when I used to go up there every time I was street racing,
dude's whole trunk lock was torn out. Dude said, I bet you won't pull that car out of here.
Guy said, I bet you better not lose the keys. I mean,
the screwdriver is older than that motherfucking trunk.
I know one thing. The cab had FuelTech on it and I wish I had it back on this car.
I like it.
Man, this just gave me little issues that FuelTech never gave me.
You got me nervous.
We're hoping you didn't get kicked out of the Cubs, guys.
Did you get your patch?
No.
They got thrown out, man.
I did get a brownie.
They did give me a brownie.
We could have had a regular knot like that.
Yeah, yeah, yeah.
How to cut that ************ off, dude.
I can see what he's thinking about that.
Yeah, yeah.
But you said this will hold, so we're good.
We're going to wait on that dowel or?
Oh, yeah. No, we're testing this deal out right now.
Yeah, it's going to be a good time.
We are testing out the Cub Scout 9.
Man, the Cub Scout 9. I'm holding this motor right now. I'm just letting you know.
Yeah, you let go.
I got a murder number on life in my hand.
Unravel.
Some little dude in Mississippi.
Okay, hold that, man.
We want to know you're in Mississippi.
Yeah, but there's no sense in it. We ain't got no dowel.
Oh, yeah.
We're just testing the knot right now.
Oh, see, you're making me feel important and ----. I ain't doing that.
I see how you are.
Hey, we're in Mississippi with a Harbor Freight cherry picker,
a strap pulling a billet motor,
and the guy that got kicked out of the Cub Scout's knife.
Okay, yeah.
His knot's going to do the job.
It's going to do the job.
You want to let it set back down?
I said we let it set back down.
He don't want to hold this thing.
He don't know what he's got.
I can just barely hold it.
Yeah, but if you let go.
I got it on the side.
Ain't no sense in it.
You know, you let it down.
Hey, he don't know if your knot's got a two-minute shelf life or a ten-minute shelf life.
Yeah, exactly.
I have six kids.
Let's not waste what we got.
Yeah.
I have six kids. My shelf life is irrelevant.
That'll work right there.
Huh?
Weight reduction.
Yeah.
All right, guys, we got the motor.
Well, the new to us motor dropped in late last night.
Took a little persuasion.
We had to cut one of the crossbars out that used to go under the old van on the old motor.
Nothing important.
Yeah, yeah.
Nothing that our buddy here can't yaw yaw.
Just a bunch of stuff.
No, he said that we don't even need it.
Yeah.
He looked at everything.
That was his weight.
Oh, okay.
You don't even need that.
Okay.
Jeff Lutt says we don't need it.
We don't need it.
Keep an eye on it.
So as you can see, we got it in late last night.
We loaded up.
We come to Holly Springs, met up with our buddy, Jeff Lutt.
Unloaded the car.
And I believe he's already got a game plan on how we're going to get this all to work.
So it's going to be ordered parts, race parts, solutions, parts on the way.
And mainly that's it.
Like pretty much everything that Jeff needs to do what he did.
Stainless works, which we already have.
We've already got all the stainless work stuff.
And then we got all the, you know, we hollered at Wade at race part solutions.
And he's pretty much got everything else because all of this is going to have to go,
you know, yeah, yeah, yeah.
Pulling the firewall.
And Lutz is going to come right through there with stuff.
So it's going to like, it's going to be a little more involved than what we had initially
planned on, but we don't want to.
But, but there's no way around it.
It's such a nice piece.
And we've kind of thrown this car together for the last decade.
It just deserves better.
So she's going to be badass.
Well, also just for clarification, the reason we can't race it this weekend.
Mainly is the intake.
We even, I brought the old intake hoping that everything we could just, even if we had to
change a few little things that we could throw that thing on there, everything would work
back.
You know, throttle body, throttle linkage, everything would work back.
That's not the case.
It didn't even come close to bolting up.
So it really put it into perspective because I'm going, that's a 10.2 intake.
It don't matter.
This is a 9.8.
It'll be fine.
Now it's one side, one side will bolt up and then the intake itself is just crooked as
hell.
And it ain't even anywhere close.
Turns out that almost half inch is, is quite a bit.
Yes.
Turns out there's a difference between a 9.8 and a 10.2.
It's crazy.
Who would have known?
So we, uh, at least we have a game plan.
We, we ordered, like I said, we ordered the stuff that we had to order.
Uh, this thing, we went ahead and called already and ordered a clear view filter system.
There's no oil filter on this.
The OG, man, it was a big block Chevy.
You got a spin on what, what was it?
Uh, the 51062 or something like that.
Yeah.
But we had the, what on it?
Oh, the system one, the system one deal.
We had the good system one deal on it.
And obviously we can't put that back on this one.
This one, uh, has to have an external, you know, like, like the new car has, like all
Jeff Lux's cars have.
So.
Which is cool.
And we'll, and we'll do a video on it later on.
Cause not everyone knows what that is.
And it's a super cool idea.
No doubt.
And, and I honestly, that the, the system one filter is amazing, but you can't see through
it.
You know what I mean?
So this deal in between rounds, we could pump it up and be able to see if there's any kind
of contamination in it.
You know, if bearings are going, which still, if you're in between rounds,
it's just so, you know, exactly.
That's just so, you know, it's like, you just want to go.
Oh, I mean, honestly, if I'd had a clear view on this one, we might've known.
Yeah.
I mean, if it was eating the bearing up before, which, uh, that's why I kept showing you
that drain plug.
What?
That's why I kept throwing you that drain plug.
It wouldn't have ---- on it.
That was just like sludge stuff.
That's I'm fine with that.
All of them are going to have that, but it is definitely going to be extensive, but it's
we'll get through this weekend and then we'll head to Jeff Lutz's shop on Monday and knock
this whole deal out.
Anybody else that wants to see another buddy of ours that showed up here?
Look at this guy over here.
Oh, Mr. Top Fuel.
This guy right here has been helping us work on the car.
And every once in a while, I still step back and go, holy ----, Clay Milliken's working
on my car.
You know, this guy goes 330 miles an hour.
I don't care who you are.
You were a Clay Milliken fan way before you had any idea who any of us were.
How many IHRA World Championships you win, Clay?
I mean, you dominated for like a decade.
You just rolled on them.
And not to mention, I don't know if a lot of people remember.
