How to Carve a Super Fun and Simple Penguin - Full Woodcarving Tutorial

FreeHands
60 followers
15 Video Views·Nov 7, 2022
How to Carve a Super Fun and Simple Penguin - Full Woodcarving Tutorial
Hey guys back again with another super simple uh carving tutorial today. Uh this week I had
penguins on the brain and what do I know about penguins? Not much. A few years back Sarah
Bearclaw had a article on Woodcarving Illustrated and uh that was her little uh her little penguin
but I have this igloo over here and I wanted to make some penguins to go with my igloo
and I thought uh I'm gonna come up with my own little penguin so this week I uh I farted around
and made a whole whack of different ones but I tried to do one with a coat I was gonna do
one with a parka and real quirky fun ones but then uh I ended up uh just going like old school
traditional simple little uh simple little penguin and uh I gotta say I like him he's got the real
folk art feel to it he's uh it looks like your grandpa made it right just a really uh light light
paint and we're gonna walk go through and we'll do the painting and everything and uh yeah we're
gonna do something similar to this now you'll see that this is a five inch piece of wood
and I recommend that and you can carve one on the other side I'm not gonna do the other side of this
one because I like that the thumbnail pic but uh grab yourself a piece of one by one whatever that
may be and uh I'm doing something different today because everyone's always talking about how my
basswood is this or that and uh one by one by five basswood but a listener sent me a piece of
huon pine now I know nothing about huon pine except for the fact that it's from Tasmania
I carved this guy already with him and it's uh it's probably harder than my worst basswood
it's a little bit stringier but I just I'm going to use a different kind of wood just to show you
so you quit asking me if this wood will work or this would work but just try it just try your
wood whatever you got and uh stay away from like super grainy like oaks and stuff that you can
really pull the grain but uh yeah give give a different wood a try for a change and uh we'll
let's do it all right well I guess I'm not done talking about wood because uh here's a piece of
basswood I'll show you how that cuts yeah here's a piece of uh walnut you know a little tougher
still doable nice shine on the cuts here's a piece of uh cherry see how that cuts same thing
a little bit harder but uh doable still doable we do we should be doing some v-cuts here so yeah
very uh the harder wood is very uh holds the cuts holds the details all right okay and then I grab
this is a this is tulip so think tulip think poplar and the same look at that all right so
let's not worry about what wood we're using whether your basswood's softer than my basswood
or or what but uh yeah so let's just take our project and we're going to use like I said
piece of huon pine I've uh marked this down two inches down okay so that's two inches
down and it's a one by one all right and I'm doing a I guess this is five inches just so I
something to uh to hold on to while I carve and uh we'll talk about that in a minute you can see
at this uh at this two inch mark I'm just going to undercut it so our carving is going to be above
that so just think about this as uh as your warm-up curve and uh it's nice to have this
undercut like that and it'd be very easy just to cut it off when you're done but it also lets you
see the bottom of your carving if I go around like that I'm using uh I'm using old faithful
today this is a helvey inch and three quarter you can use the OCC tool you don't need inch and
three quarter you can use an inch and five eighths you can use inch and a half you can use an inch
and three eighths you can use whatever you have in your hand I really want to get away from uh
the thinking that the tool is the uh is the end all and be all of the carving
all right so yep like I said just undercutting that so no we haven't started yet that's where
we are so let's just go ahead and start let's look at our piece of wood here and uh let's say
it's halfway all right halfway let's go up just a little bit farther and that's it that's all
we're doing this is going to be the bottom of our beak all right so I want to get that in there
nice right on the corner like that okay there we go now I'm just going to take from the point
now we're just going to go swoop it back like that all right now let's just leave that alone
for now see that and uh let's go around to all the corners let's just knock the corners off see
you see how that pulls if you have problems with that you just go the other way
nice clean cut all right so let's just pop off all these corners
same in the bottom too to the bottom there you go that's what we got four uh flattened corners
and we got our schnauz beak pointed out here obviously this is not a traditional
penguin because if it was it would be more of a pointy dowel looking beak on it all right
so now let's just think about the height of it let's put this guy in frame here
see the uh the height let's just choose where we want to be and uh I don't know say three
here's a secret you can always make your beak smaller but you can never make your beak bigger
after you've cut it all right so okay now the eye shell we're going to take the center point of the
beak and we're just going to make these little angle cuts on here just roughing it in for now
but I mean how simple and fun is this carving all right
a little bit angled back go ahead and go to the top you can cut that right off you can see how
big our eyes right now it has the uh kind of has that owl feel to it if you've carved the owl
now the beak is going to go down so I'm going to take that across like so
and like so all right kind of towards the edge of the eyes should have a carving glove on by the
way if you're a new carver keeping that nice and clean nice sharp edges and we're going to take
the corners off of there so right there that's that's too wide all right so now I can make it
smaller like I said you can make it smaller but you cannot make it bigger there we go
bring that up again there you go now reset the uh the eye shell all right
this should be there should be a point on the you know I'm saying the center point
should be raised in the center of the eyes
we can just kind of smooth that peak around there but uh yeah that's pretty much it
okay so from there we can go over just below the beak here and let's just start
just a little scooping a little scooping all the way around you can see that now that's
scooped even a little bit more even I'm gonna do that all around just below the beak
the bottom of the beak level don't be afraid we're just uh just gonna thin that head up
make sure they look similar when you look at it trying to see this I'm working over top of my
camera all right it's not so bad I can go a little bit thinner
maybe that'll all come out in the end all right and then let's just round off the uh
the head and every time that we go around like that we're gonna leave this ridge which we're
gonna go back right smooth smooth it out let's work your way around the head
yes we want that nice top to be rounded right around just a few little stages and steps
and we'll have that in this watch we don't have when we do repetitive cuts we don't want that
the ridges all right so smooth out the ridges nice and around
there we go we can bring that back a little bit lower there's no uh
wings on the on the side all right that's where we're at all right where we knocked the corners
off these are going to be where the uh little side wings are all right so I'm going to uh
introduce a v tool into this and let me uh show you why in a second but basically
that's going to be the flat here is going to be our uh our wing really so we're just going to
go on each side of that flat spot so it's easy to see on both sides
but I want to talk about the v tool really quick and why we should use the v tool so let's say
this is my uh my penguin all right now I want to make a wing on here so I'm going to go like this
right I'm going to go like this all right same thing on this side all right
coming up here okay so there's our wing okay now I'm going oh that's nice that's good
and then I should go a little bit deeper and then I'm going to go a little bit deeper like
this you know I'm going to cut it again like this and then before you know it I've got all these
extra little gross little cuts all right so I'm going to use the v tool so that when I
lay this out all right all I'm going to do is uh take that v tool and come up this way
and come up this way you know I'm going to lay that out and then when it's time when I'm happy
when it's time to commit I will come back with my knife and let's do a real sharper inside cut
nice and clean I'll commit to it and that will be it all right not with there's no uh no incidental
cuts in the in the side like that okay so let's just use a v tool on this and uh like I said we
can just uh we can wing it get it and wing it that's the one side same thing on this side
I'm going to uh come back and clean up all that stuff still all right so we gotta make sure we're
about the same height from the bottom I'm just going to come up maybe a little bit of a curve
all right let's make those
somewhat similar on this other side and with the v tool again we can uh we can clean these up we
can make one bigger or one smaller to match but uh you know there you go all right so now I'm
going to come underneath on the bottom I want this to come down I want that base rounded in
almost to that the cut mark that I've made below all the way around
maybe a little bit more in the back even a little bit taller a little higher
to give some shape and uh I still have these saw marks but like I said we're going to clean that
all up after but we just got the uh the wings in place and uh just working our way around the
carving cleaning it up a little bit of time take these uh come on pine don't fight me
all these little saw marks off we want every piece of that wood always cut so that we don't
because this the paint and stain or whatever you do it will always take differently if you
haven't cut the face of the wood now it's pulling so I need to go the other way
um all right we're going to uh bring that down now since we're going to call this like maybe a
a pocket pocket penguin or something I want to have the feet but I don't want them sticking out
too much before let's stop there you see the shape I don't like the shape on the back I want to bring
that way in I want a real punched feel to that even more let's be on the bottom
yeah nice sloping back okay sorry uh on the feet on the front here I want to have feet
but I don't want them sticking out because I don't want anything that can break so let's just
you know something like this see these are these are tiny on this one we'll go bigger on this one
all right just something like that so again let's take a smaller v-tool and I'm just going to
run that around just like that all right now if I'm happy with that I'm just going to stick
my knife in there just to make it a finished look I'm going to cut down into it just a little
a little edge all I want nice paint transition and uh just a little bit jutting out around a
little bit from this side and you can decide if you want to split them or not I guess we
like I said don't want these sticking out in the air let's let's uh let's split them
just a little bit looking around that
all right might as well create a little shadow on the bottom too
there we go just going to cut that to where cuts join nice smooth transition there
a little bit more of a v a little a little chip out of there same on the bottom it's nice to
create a little little shadow nice to create a little shadow that's even on both sides okay
all right now let's get back to these uh these wings all right let's look at these I want to
sink that a little bit more a little more a little more shoulder on there keep looking at them make
sure we're happy this one seems a little bit uh higher so I'll just bring it down okay now that
we're happy let's take our knife we've used our v tool so there's no cuts or anything but
let's just commit to that shape and spot come in here take a big v cut nice and deep so you only
have to do it once okay same on the back it's that going back over and over and over and then
you start making all those sloppy little extra cuts now we're still going to round these a little
bit but it still has the outside edge see that nice and nice and clean
take the sharp edges off that grain pulled a little bit here I don't like that all right
same on the other side there you go why won't you come off come on let's get a stubborn one
all right let's just round all the sharp edges off
take away any corners
and you really got to find which way the grain wants to cut
I mean all in all that's the the bulk of it you can go around and clean up and fine tune
but I thought to myself for the penguin colors okay there's white every penguin there's so many
different kinds of penguins but I thought without painting the eyes and just putting
the dots in the eyes that kind of brings that that stomach color to the head and we can go
ahead and color the whole head all right so that's all I was thinking a lot of uh I know
made a v-cut to separate the colors but we can do that just with the uh the paint all right so we
don't have to worry about that too much so let's just draw in our little cartoon eyes like I said
we're only going to use these for uh the little dots but it's nice to uh have that extra bit of
so that's it I'm just gonna cut them in a little bit of an angle in and down a little bit of an
angle in and around all right stick my knife in the bottom take out that corner same on the other
side slice on the bottom first and think of that corner I'm going to come up from that corner
around and around just finding that other cut all right now we can just kind of clean it up a little
bit my pencil marks are outside of the eye so I may have to slice them off but overall a very nice
simple eye and yeah so I will clean off those pencil marks
and go a little bit deeper too maybe
okay
all right let's just go around give it a a quick look around all the uh
any sharp edges
there's one right here the beak I don't this is not a chicken or
I'm gonna put that beak a little bit down
we're gonna just kind of round that a little bit down there I can live with that
see that so it's not really pointy it's just kind of hooked down all right if we want to do that
little little corner here just to the shelf that way we have a paint line
right through for the beak without mixing it up
I think
I think we've got it I think we've got our little pocket penguin or whatever we're going to call
this one I don't know why I like the idea of pocket penguin what does that even mean
I think I'm thinking like a comfort bird comfort bird pocket penguin but what an easy carve eh
fun that's what we want fun and easy all right I'm gonna go cut him off before we paint so I
can clean up the whole bottom but uh I'll go cut him off and uh I'll meet you at the paint table
I've cut off my little my little penguin but obviously he would be easier to paint if you did
the five inch stick but I'm just pretending we didn't okay but I always have something to hang
on to I really like the idea and you can always like I said flip it around and make two at once
but you can make a little paint stick by uh this is a drywall screw I just uh cut the
drywall screws are hard so they actually almost break off the uh the head and drill a hole and
just glue it into a stick and uh just screw that right in the bottom and then you don't have to uh
don't touch your carving all right because common uh common mistake and uh I've done it myself
is uh you're trying to paint something and your fingers always touch it and mess it all up so
a little paint stick works wonders or just don't cut it off so one of the first things I want to
do here is uh the eyeballs now that's strange to do that first but the fact of the matter is
it's gonna have two layers of paint so I want to get that black solid color eyeball in there so
that I can put the white dot after it dries all right so actually I see one little chip I don't
like here but anyway uh take a little uh toothpick or if you got a stylus I'm just gonna take a
oh a decent sized stylus I'm just going to uh put a couple eyeballs in here very simple
like I said toothpick works just as good but now that can be uh that can be drying while we work on
the rest of it all right we can put our little reflective dots in after it's dry so what I'm
I guess I'll keep that black out I'm going to make a wash with the black all right so that's
just going to be a little just a smidge of black and lots of water black is such a strong color it
will go a long ways we want it to be very antique-ish I'll try the back here just to see
okay that's pretty pretty light all right so we can add a little bit more black a little more water
all right but like I said I'm going for myself I don't care if you paint this any way you want
you can paint it purple for all I care but uh if you do it light like a stain it's gonna have that
like I said that antique folk folk art look which uh well I love it so that's why I'm doing it my
way but you may do it any way you like now when we get to these little uh wings here I'm going to
try and keep it clean on the inside of that wing all right I want that to be the uh the side of
that light colored belly and the same thing I'm going to go from the eye here and I'm going to uh
make a little line across the eye all right but I'm going to keep it coming around a little bit
just the feet here you just kind of see that line okay so I'm going to go ahead and do the rest of
him but those are really the two things that I want that eye to the wing wing to the foot see that
there you go if you get too much here don't be afraid this is why I like the water base
we can uh we can kind of soften that edge with water too all right so it doesn't have to be a
hard hard edge we can really soften that with some water and not make it so hard all right
I'll finish painting the black and then I'll bring you back okay there's our
black kind of a stained looking fella all right you can see how I don't have any real hard
hard edges between a little bit of water pull it out like I said we're trying to make this uh
we want that antiquey antiquey feel look we want it to look like grandpa carved it all right
so I'm going to use orange and uh again who knows what color I should use but
same thing I'm just going to really wet that up again and uh attack the beak I can see I didn't
get all the black on my paintbrush so it's a little bit of a browner orange on this
uh all right coming up to the eye very careful very carefully
a lot of people don't love painting I actually really enjoy the painting process
all right there's our there's our schnoz and uh
if you want to do the feet a different color you can do the feet a different color
you can do whatever you want all right I'm going to take this over my black eyeballs are not
really dry yet so I'm going to put the hairdryer on this we have to uh put a little reflective
dots on so the same idea with the uh toothpick or whatever I'm just going to put those little
white little white dots on the corner of the eye that just seems to just bring it to life
puts his soul in them look at that changes changes the look of them doesn't it but again
we gotta dry that now then our options are uh are endless really we can uh we can use
what I'm going to use linseed oil you can use a tongue oil of any kind you can use some kind of a
feed and wax you can use a salad bowl finish whatever you want but I like the oil
because you're going to see the oil is going to give us some depth it's going to soak in so
I'm going to uh just paint them with uh with some linseed oil all right and again as we always say
let's uh be careful with your linseed oil rags
you know when I uh when I edit this video I'm going to say why do I keep saying like I said
like I said like I said too much too much like I said but that just gives this oil
it's just giving it warmth and depth already and uh like I said like I said in the beginning
I want this for some reason I want this pocket penguin and yes I think I'm going to call it the
pocket penguin I want to uh I want to look like grandpa made it you know I just wanted to have
that aged aged look so let that sit for a minute soak in a bit but look at that he's so
looks so warm I just love it all right well there you go folks I don't know why but for some reason
I just got great satisfaction from this silly little carving it's a fun simple easy to do
stress-free take your time use whatever kind of wood you want and uh have fun with your carving
carving it should be a meditative relaxing and fun and if it's not that
then uh why bother why bother right so have fun with it take your time enjoy your hobby
in a simple simple little project that's gonna make you uh tickled when you're done so
all right guys fun times see you next time later
