Carve a Simple Woodspirit in 15 Minutes - Complete Beginner Woodcarving Lesson

Wood carving: Tips and Tools
229 followers
Welcome to this complete beginner wood carving lesson.
And I'm calling it a wood carving lesson today instead of a whittling lesson because today
we're going to add an additional tool. Instead of using just the knife we're going to use the knife
and a v-tool. And if you're not familiar with the v-tool you can see my video introducing the
the v-tools. And actually I developed this process a couple years ago when I got a new v-tool and I
was just playing around with it and my thought was could I carve an entire face with just a
v-tool and I can't quite do it. We're going to use the knife a little bit but we're going to use
the v-tool to do almost all of this. This is a great practice activity for getting comfortable
with and really working out your v-tool and you can do it quickly and simply. These are a lot of
fun you can do them quick and as you can see you can finish them in all sorts of different ways.
I find them a simple and fun project especially if I want to experiment with different paint
techniques. It gives me something easy and quick that I can do with that.
So let me get those out of the way and make a quick note about size here. So I've been using
one by one pieces for the complete beginner series so far. I'm going to do this on a three
quarter by three quarter by three inch piece on the right. This is just a fun little size I think
but three quarter inch by three quarter inch might be a little bit harder for you to find.
This will scale perfectly to a one by one by four. The proportions will be exactly the same
and I'm not going to talk about specific measurements just fractions and proportions
anyway so you could follow along with a one by one by four. It'll just take a few more minutes
and be a little bit bigger which is absolutely absolutely fine. Okay all right so let's go ahead
and get started. Our learning goals for this project are to carve a simple wood spirit in
15 minutes and our goals are that you'll be able to carve a simple face and make clean cuts with
a v-tool and that's really what we're introducing here is how to use the v-tool and make clean
cuts. Now I'm making a strong assertion here which is that you can carve this in 15 minutes.
Our video is probably going to be a little longer than that because I'm going to explain it as we go
but I do believe that you can do this if you practice just a little bit in about 15 minutes.
I can actually do it in about 10 minutes if I want to but 15 minutes is a reasonable attainable goal
for these I believe if you're using the v-tool and you learn the process. So let's begin.
I'm starting with again this is a piece of three quarter by three quarter by three inch
and I'm going to find about where the middle of that is about halfway up on one of these corners
and I'm going to go kind of just below the middle and that's I'm going to make a little mark and
that's where the bottom of my bottom of my nose is going to go. Okay so that's going to line with
about the bottom of my nose. I'm going to start with my knife and I'm going to make a straight
stop cut in and carve up to that and I'm undercutting where the nose is going to go.
Now you can choose how deep to make this but I would recommend you make it a little bit deeper
than you probably think you need to because it'll get rounded out and that should be a pretty good
depth there. I'm really going almost halfway across there almost halfway across the um the
side the flat face of the side in order to get that width. So that's the first thing I'm going
to do is just carve underneath the nose carve that out. Next I'm going to come in and I'm going to
draw um I'm going to draw in the lines where I want my eyes. I'm going to make those lines about
as wide as the nose about halfway across and instead of going straight across I'm going to
angle them down just slightly for where the brow is going to be. This is kind of marking where that
brow line is going to be. Okay again with my knife right now I'm using my one and a half inch
deep hauler knife a great go-to knife right now. I'm going to put in a stop cut straight into that
line and then I'm going to go just underneath it and carve up to it at a little bit of an angle.
I'm going to come down a little bit further and do that again and I'm going to do it on the other
side. I'm going to make my stop cut being careful not to cut all the way across it's probably a
little safer to do it like this. I can rock into it that way without cutting all the way across
the side of the face and then I'm going to carve up to it. Now as I'm doing this I want to make
sure I keep this centered and I don't really have to draw a center line because the the corner of
the the piece of wood is a center line but what I want to do is watch that the lines that I'm making
above the nose that this angle coming in is staying in line with this corner above and this
corner below. The other thing I want to do is make it level so I can see that this is coming down at a
more shallow angle than this one. I'm just going to recut that a little bit to even those out and
I'm going to keep carving down a little bit further on the nose and a little bit further on the nose
but I'm trying to pay attention to that right side of the line and keep that in line with
the corner above and below. I'm going to do that a few times until I've got a nice
symmetric cut. I'm not going to go all the way down to the tip of the nose. I'm going to leave the tip
angled like that and I just want to make sure that I've got that ridge of the line going right
up in the middle. If this is going back about halfway through the face of the wood
this is probably going back at the deepest part here about a quarter through to the side of the
wood here. The next thing I'm going to do is I'm going to take my knife and I'm going to flatten
this corner above the eyes above the eyebrow here. I'm just going to flatten it out with a push cut
and then I'm going to take that hard corner that I made and flatten that out. I'm going to extend
that kind of all the way around the sides here if I can and I'm just going to make a nice flat
clean surface for the top part of that face. What I'm doing there is I'm just kind of shaving off the
saw marks, the machine marks, making a completely fresh piece there but I'm also rounding that off
and then that creates a nice profile for me there. Now the nose sticks out well and I'll have a little
bit of a brow there. Let's go ahead and flip it around. I'm going to do a similar thing on
the bottom under the nose. I'm going to cut this down kind of straight straight down flat and then
I'm going to take that to the side like this. You'll see I'm breaking a little bit which means I really
need to be carving the opposite direction here so I don't get that breakage and carve right up
underneath the nose like that. Now I've rounded out that edge on the bottom side and the main
thing is to kind of, we'll get it better in a little bit too, but you want that nose to stick
out like that. Next thing we're going to do is try to carve the nose. I'm going to
draw these lines on for you. I'm just going to go a little bit out to the right at the top of the nose
outside the brow. I'm going to draw a straight line down to the outside corner of where I stopped
in undercutting the nose. I'm going to do a similar line on the side so I've got a roughly
symmetric kind of trapezoid when viewed from the front for that. This is where we're going to
start with a v-tool but first I'm going to put in a stop cut. I'm going to put the tip of my knife in
right at that corner right along the eyebrow line and I'm just going to stick it in pull it out.
It's going to give me a nice little stop cut. I'm going to do it on the other side as well.
Stick it in and pull it out. It's going to give me a great stop cut and now what I'm going to do is
I'm going to use my v-tool. Today I'm using a quarter inch 60 degree v-tool but use what you
have. A quarter inch would be a good size for this. If the angle is slightly different or whatever
that's fine. What I'm going to do is I'm going to carve along this line on the edge of the nose.
I'm going to kind of tilt to the right just a little bit as I get up there and get cut up to
that stop cut I put under the brow. I'm going to carve right along the side on that line right up
to the brow. That stop cut was perfect. It popped right out. If you forget to do the stop cut you
can do it afterwards. It's just a little bit simpler to do it first. Same thing here. I'm
going to carve right along that line but then kind of tip to the left straight into that and
I've defined the outside edges of the nose. A couple more knife steps now. First thing I'm
going to do is I'm going to kind of round off the bottom corner of the nose and to do that I'm going
to take the tip of my knife and put a little undercut right underneath that corner there.
You can't even see that I cut anything out but I'm just sliding the tip of my knife under the corner
and going at about a 45 degree angle popping that right out of there. There's a little bit
of messiness there. I'm not going to worry about that right now because we'll actually address that
in one of the later steps. Do the same thing on the other side. Just a flat undercut under
the corner there and then pop off that hard corner at about a 45 degree angle like that.
Okay, great. Then to finish my nose I'm going to just do a straight stop cut on the front of the
nose to flatten it a little bit and do a few more cuts here. I'm going to do on the front. I've got
a flat spot coming up here. I'm going to push straight up the front, not too deep. I'm just
going to go straight up like that. I'm going to turn it to the side. I'm going to go one cut from
the side up to the top. Turn it upside down and do a similar cut from the side. What I'm doing is
I'm getting rid of this hard line on the edge of the nose. So a very light, in this case, a pull
cut right up on the side. Okay, that's pretty good. Then I'm going to just very lightly round
off the bottom tip of the nose. You can easily spend a lot of time here and this is where you
go from a 15 minute wood spirit to like a 30 or 40 minute wood spirit. You can spend a lot of time
here but the purpose of this is to just be kind of a quick and easy one. I'm just giving you a
really down and dirty quick and easy way to make a nose. Next thing I want to do is
finish the eyes. I'm going to use the knife for that and then we're going to be down to almost just
the v-tool for everything else. What I'm going to do is I'm going to put my knife back in the tip
of the corner of the eye here under the brow. I'm going to extend that stop cut so it goes from the
eye further out to the side here. Then I'm going to go about halfway down the nose and I'm going to
cut up to that stop cut. One thing I forgot, which I usually do first but I'll do second here,
is I'm going to add a little stop cut right along the inside edge of the nose and that's going to
it easier for that piece to pop out. Remember I just repeat those cuts if it's not coming out.
I'm going to repeat them until it does. Don't pry or anything like that. Perfect. Do that on this
side. I'll remember to put my tip stop cut along the edge of the nose. I'm going to extend this
stop cut under the brow out just a little bit and then I'm going to go about halfway down the nose
and carve straight up to that until I pop that chip out for the eye.
That's good. I accidentally made that a little deeper than the other one so I'm
just going to come back and make this one a little deeper. Keep it as symmetric as I can.
Good. I'm going to do two more things to finish the eye. I'm going to add this stop cut. I'm
going to extend this stop cut just a little further out, maybe halfway between there and the edge
and then I'm going to go if I went from halfway up the nose to here I'm going to go come out to
here starting about a quarter of the way down the nose or halfway between where I started before in
the top of the brow and I'm just going to extend that out just a little bit. Make it a little bit
wider. Same thing on this side. Okay and then the last thing I'm going to do for the eyes is I want
to make some nice deep holes for these inside eyes. I'm going to take the tip of my knife.
I'm going to poke it straight in here alongside the nose but under the brow and then I'm going
to do the same one here to the right side right under the brow. I'm just sticking the tip straight
in and then I'm going to come here and I'm going to carve, pull it up here, just a little triangle
out here really deep, deep as I can and see how that creates a nice just deeper shadow right in
there where the eye socket would be. That's all we're going to do for the eyes. Really simple.
So I'll repeat the same thing on this side. Those hard deep tip cuts in the corners. Repeat those
cuts as much as you need to to get that chip out and you've got those nice deep eyes right there.
Very good. All right while I'm there I'm just going to very lightly clean up the tip of this
brow. Just very lightly because I've got kind of a hard line there. Clean that up. Okay perfect.
So that is my eye. All right next I'm going to make the last couple cuts that I'm going to
actually use the knife for here. I'm going to put a stop cut right along this corner edge of the nose
right here and I'm just going to stick the tip of my knife in there. Okay I'm going to do the
same thing on this side. Just the tip of the knife right along that corner. Okay and next we're going
to carve the mouth lines. So I'm going to draw those here and have them come out a little bit
and down and it doesn't have to be perfect. However you want to do this is fine. Right out
that angle of the nose coming down like this. It's actually a little further down than I want
but that's okay. For the sake of clarity I'll probably start about here. Okay now I'm going
to take my v-tool again and I'm going to carve right along those lines and as I come into the
nose I'm going to lean to the left just a little bit straight into that stop cut. Perfect. Same
thing along here. I'm going to come up this time I'm going to lean to the right a little bit straight
into that stop coming to the nose. Now if you're new to using a v-tool you're doing this very
carefully. If you're pushing too hard you could easily pop off and lop off half of his nose
and we don't want to do that. You wouldn't like it. You wouldn't like it.
So be careful if you have to make that cut a couple times you can. You know maybe make it a
little bit deeper. If you need to do it a couple times that's that's fine. Okay and then I am going
to get my knife out here one more time and I just like to soften this edge here. Watch the tip of
your knife when you do this so you don't dig deep and dig too deep into that smile line. Pull those
off. Okay good. That got a little bit messy so I'm just going to come back here and clean it up just
a touch. Okay and I've got a couple extra lines here that's just extended down underneath the
nose there just a little bit so I'm just going to redo that undercut. Pull those out cleaning up
as I go there. All right so let's add the smile next then and what I'm going to do is just kind
of draw a smile from one side to the other and do that about like this. I find the easiest way to do
this is to start at the bottom with your v-tool horizontal and to cut and then curve up as you go
into that corner of the smile line and turn it around do the other way horizontal and then curve
up. This is an example where anytime you're doing a curved cut with the v-tool you might want to do
it a couple times to make it clean. That's pretty simple. Okay then the next thing I'm going to do
is I'm going to look and I'll mark it with my pencil so you can see it but I'm going to look
about halfway between that smile and the nose and I'm going to draw just a little line perpendicular
to the mouth line right there and right there and I'm going to use my v-tool and just put a little
notch right there and another one right here and extend that back maybe just a little bit more.
What that's going to do is just give me a nice little cheek line. There we go. Okay next step
is going to be the eyebrows and so you can do these a number of different ways. I'm going to
make these nice and tall so you can see them good and then have them come down here right about in
line with the edge of the nose come straight up and then have them come out and taper down to the
end of the eye areas. I've defined it here and I'm going to attempt to draw a roughly symmetric
one on the other side. Now if you have multiple v-tools this is where you might get a small one
out. A micro tool might be really helpful for making these lines but I'm going to do this all
with one v-tool just so you can see that I can't I don't want to make deep cuts here I want to make
a light cut here so I'm just going to very lightly with my v-tool just barely in follow that line
carefully and slowly see how slowly I'm going so that I can control that curve and come down and
so I don't run off it and there's one. Do the same thing on the other side very shallow cut
again if you have a micro tool or a smaller one maybe an eighth of an inch or one or two millimeter
that would work well here but I can do it with a bigger one just a little bit more carefully
like that and then next I'm going to make similarly shallow lines I'm going to start
right at the corner here and I'm going to go at about a 45 degree angle back
and make one line and then I'm going my goal is to make three cuts here so I'm going to
go about another third of the way across and then another and make those three lines perfect
same thing on the other side about a 45 degree angle and I'm going to do one two three so that
is oh we forgot the edges of the nose let's do that real quick and then we're going to do the
then we're going to do the eyes. The last thing we missed here are these little notches
on the sides of the nose and we can do those you guessed it really simply with our v-tool
I'm just going to mark in a spot really right above
right well right about in line with where I started cutting up to the eyes where I'm going
to put that maybe just beneath it okay and then the easiest way to do this is to undercut the
nose and tip of my knife right under the side of the nose there tip of my knife right under the
of the nose there and then I'm going to use my v-tool straight in on each of these lines
there you go cut off that corner of the nose and cut off this one okay now again you could
spend a lot of time here playing with the shape of that and I'm just giving you a really basic
way to start it okay so if you want to come back here and make this a little narrower above that
by all means feel free to do so but this is the the quick way to do it and there's so many ways
you can turn this into the one hour wood spirit but that's it all right so the last thing we're
going to do is obviously the most fun part which is going to be carving the hair so I do you know
more complex wood spirits like this where I really try to make sure that I carve every inch
and you know every corner is is is rounded and I spend a lot of time making sure that's even
but what I'm really going for in this case is something that's clear and simple and actually
leave some flat surfaces in between because when I paint and finish it those surfaces give me nice
nice depth so I'm going to show you with a pencil although I don't normally use one right above the
left brow how I'm going to do this what I want to do is make kind of a a wave and I'm going to
start by going to the right actually curve back to the left and then back up I'm going to make
kind of a wavy line I don't want straight lines and you're going to have to fight the grain to
make a wavy line now I can do that by being really short and careful the first time okay
there's a good first cut but really I want to make a nice deep cut so I'm going to come back
I'm going to follow the same line and make a deeper cut okay that's pretty good now I'm going
to come over to the right here a little bit I'm going to do a similar thing but I'm going to kind
of swerve off and then go up to the right and the main thing is I don't want parallel lines here
I want to leave separation so they're closer together at the bottom and more wide apart at
the top so I'm going to do a similar thing here I'm going to curve off to the right and then up
and I'll do this a couple times to make a nice deep cut okay I'm doing this intentionally so
that I have these closer together on the bottom and a big wide gap on the top and what that does
is it gives me space on the top to come up right in here and add another deep one kind of more or
less straight up but maybe curve it a little bit like that now what you might get is something like
this because your v tool is cutting against the grain on one side and with the grain on the other
side so if I turn it around and kind of run along this edge I can clean that edge up a little bit
so you might want to do that as you go through if you get any spots where it's kind of breaking
come back and redo that you can kind of tilt your tool to the side make clean cuts that way okay
now I'm going to come back over here to the left and I'm going to go just a little bit to the left
of that and I'm going to come up I'm going to curve off to the side this time I got to watch
my finger there even though I have my glove on so that might pop off okay good and now I've got this
big flat area so I'm going to just come in the middle of there put a nice big one right there
same thing over here this is going to be more or less just straight off to the side
there's another one straight off to the side and see I'm going kind of back and forth
like that I'm going to do another one just between the eyes and the cheeks going
kind of down same thing here I've got some space underneath here I'm going to do a similar one like
that and like that and then for the beard underneath the mouth I'm going to do similar
to what I did on top I'm going to start down here and I curve one way back the other way
and then come down flat do a similar thing out here you can you can experiment with this and
obviously have fun doing different shapes what I'm trying to do is create closer together near
the bottom and spread out at the top because that gives me the opportunity to put these extra cuts
in there and then separate them so I can do that down here too just put an extra cut in there
and don't let's just go down the middle see how I kind of just go to the side there
that's going to just make it a little bit more a little bit more interesting
we've got a wide flat area here so I'm going to add a cut like that and maybe one more on this side
okay now one thing that I do like to do real quickly is just kind of go up and down these
sides and clean them up with my knife and what I do is I just add a little cut to the top of that
and then down to kind of clean those up sometimes they get a little messy but what it does is it
makes this nice effect of the hair just kind of tucking up behind as it goes up it gives a little
bit of a more interesting profile when you look at it from the front to see those sides like that
and then I flip it around and going downwards I do the same thing okay and that allows me to get a
clean line there and just gives me that more interesting texture on the sides of the of the
so that's optional but I feel like it's a nice simple way to add a little bit more interest
all right now we're almost done that's the large pieces of hair the last step is going to be add
small lines between these so you can see that on here and again if you had a smaller v-tool
you could use that to do these ones where you go basically along the flat surfaces I'm going to use
this one just again to show you that you can do it all with one tool but let's do this now
this is a little wide up at the top for two lines so I'm going to start in the middle I'm going to
hang kind of to the right I'm doing a shallow shallow cut here like we did on the eyebrows
and I'm going to kind of curve up I'm going to the right so that I've got this little bit of
extra spot here and I feel like I can add another little line there okay perfect I can go up the
middle here and I'm going to decide as I come up here am I going to go to the right or to the left
I'm just going to choose to go to the right and follow this flat area all the way up but then
I'm going to pick up here and do a similar thing to the left kind of hung to the side of it there
so we've got a little bit of space to do another one like that okay on this one maybe I'll go to
the left first I've got a nice space here for this I'm going up to the right okay so I'm trying
to avoid parallel lines where I can and just kind of filling in if I stay on one side that gives me
space to do another line on the other side and I can keep those curves kind of following along with
the larger lines I put in now here would be really tempting to do just like two parallel lines on
here but I'm going to show you what I'll do instead is I'm going to do one where I come up
a little bit further back like this okay and that left me enough space to do that one there
and a little tiny one here okay that just allows me to fill it up in a way that's not quite
completely parallel on this one what I'll do is I'll go kind of more straight out there
and then it allows me to fill that one in there and this one in here so I'm looking for little
ways that I could fill it in with some shorter lines but they don't necessarily have to be
parallel now these are kind of smaller so I'm just going to do kind of one short one on each side
in these little spaces and I'm going to follow a similar pattern down here so I've got
really only room for one line on this you do that somewhere over here you do that
and now I've got a space flat space for a small line there I can also do this
okay I'm going to start here and we'll go to the left on this one and we'll do one to the
right here okay I've probably got room for two lines here so I'll do one off to the right
one down to the left and actually we've got room for an extra little one there
on the corner like that okay and that's it you might want to come back and clean up some of
these lines just a little bit if you need to if you find that your cuts are tearing a lot as you
go through you can take a minute to strop your knife but that's it super simple I know we spent
about a half hour doing that you practice this you can easily do it in about 15 minutes here's
one of the painted ones and my favorite method for painting these is to put a watered down paint
on them and then after it dries to use an antiquing solution which will give you those
nice dark shadows in the corners I'll probably follow this up with a video on how to do that
but not today so thanks for watching I hope you enjoyed that and have fun making these faces happy whittling
