We were able to break $70 bolts because of Jake Torren and Thomas Hollinghurst were so generous. The Petzl Coeur Pulse (https://amzn.to/3bjDQEf) is a removable bolt that does not require any tools... after a perfect 12mm hole is drilled and cleaned). Thank you Bobby Hutton and Mike Rogers (@wolf_in_the_weeds) for destroying things for science with me. MBS is 25kn in shear and 20kn in tension. We got 47kn in shear and it pulled out at 17kn in tension.
You guys have been asking for the Petzl Core Pulse to be tested
for a long time and we're finally going to do it. Stay tuned.
I am Ryan Jenks and this is Bobby Hutton and we are testing the Petzl Core Pulse today
and we have found the middle of nowhere so since we are social distancing and it's hot out I'm
going to take that off. Happa Design partnered up with us and on slackline.com store we have
the shirts, the hats, this mask or whatever and all the vectors are on there for free if you want
to print your own stuff. So Jake Torrin and Thomas Holinghurst made this possible because these are
expensive and about 500 other people made all of our hydraulic systems and dynos and everywhere
we're at today possible and about 500 other people asked for us to test these things and
here we are. We got these a while ago but we wanted to test it in real rock since a lot of
people have concerns about us testing things in concrete. I wanted to do something this nice in
real rock and it's finally springtime so we can. Let's go over the product, the features and all
the ways you can die with this thing because apparently there's a lot of them. So the Petzl
Core Pulse. Core stands for heart and pulse and pulse stands for it beating and it is a 12 millimeter
and we're going to talk about that because they are not joking. That is not something that has a
lot of tolerance so we're going to find out about drill bits and their tolerances. Basically what
does the package say Bobby? On the back of the package shows you how to lock and unlock it.
Needs to be deployed to put in and then you will die if you use a two bladed bit. They want you to
use a four bladed bit much like this one. All right we're going to measure that with our our
measure-o-meter or calipers and find out exactly how many millimeters that is. It has a three year
guarantee. I'm not sure from what. I love warranties and guarantees on bolts. It just makes me giggle.
So it has a pretty standard hanger that doesn't spin on it. It is embedded into the bolt so if this
black knob is down you can lift the sleeve or the side plates up allowing the wedge to go into the
and when you release it that goes back down making it tight against the sides of the hole
and if you screw it up you can't close it. It won't move. So it's a pretty nifty design. It's
intended for being removable and for being a short-term bolt possibly. It's pretty nice
actually but it's just funny that this is 316L stainless which is great for long-term bolts and
the pulse is eight millimeter and this is core pulse which is 12 millimeter. They got two sizes.
What do the instructions say Bobby? Something that was interesting to me is it looks like they
really don't want you to use that for sport climbing. The next one don't factor two on this
which of course makes sense and then don't only use one bolt. Yeah this is because there's one.
They want you to use multiple. This looks like industrial application because that is the only
place I ever see a double rope ascending system. They don't want you to install it upside down
and clip a carabiner through it. Well you might try that because that looks fun. And then all
normal bolt stuff. Yeah install it straight. That's a really good graphic. Maybe we should
steal that for the bolting bible. This is the maximum braking strength. For the 12 millimeter
we got 25 if you pull it in shear and 20 if you pull it in tension and then here which is really
nice they have the deformation where it actually is the force you put on before it's basically
screwed up. Yeah and that that's probably very similar to the working load. And it's nice if you
are using a removable slash reusable bolt and so at six kilotons you no longer can use this thing.
Three for the skinnier pulse. Installation of the anchor. So you drill it with a four bit
not a two bit or you die. You brush the hole out, squeeze, push, turn, lock and then placement
indicator is if it's sticking out if you see that little bit um space right there then
I guess you die because it's not in the rock all the way. So there's an indicator we'll have to
check that that it's not properly engaging in the hole which is interesting. Now here on
Bolt Busters from the beginning we've always wanted to test three in shear and three in tension.
It's not like a ton of samples but it's enough to be able to draw some conclusions from. Well we only
have three today so we're going to try as many things as we can with the three we do have. So
we're only going to install one right now and we're going to pull it in shear. We're going to pull it
normal and see what happens and if it breaks super normal standard and boring then we'll get
creative and do all the things we're not supposed to do with these. We're noticing a interesting
I don't know if it's a problem or not but this is open so which means we can open it and then
closed is when it's in its locked position and these two are stuck on its orange piece and so
that orange piece can't rotate around this side. It's just the problem is these black parts are
stuck on them. You can see it moves that what looks like a washer but it's more like a thimble
and we're going to try to figure out why it's stuck because you always have pliers with you
when you're on the mountain. Yeah I'm you can feel it's not good for it. Wow. So petzl carabiners
have a reputation if you screw them too tight and then load them they lock and you need pliers
to get them undone. Really? Yeah I have bootied three or four petzl attache carabiners because
that's happened like on an anchor and then they couldn't get it off and I happen to have a
Leatherman in my pocket and was able to get it off. So we'll use some tools that I always carry
every time I am out climbing and see if we can get this to unlock from the unlocked position.
So with the pliers Bobby got it to be unstuck. I think this is a good time to bring up. It's
anywhere between $45 and $70. The sites that I saw you can get it in that $40 range. It only
costs about $20 shipping. This is not sponsored by petzl in case you can't tell. If you have it
unlocked position too tight apparently it gets stuck. Before we put these to the test let's talk
about their use. They are temporary bolts in case you can't tell from the removability of them.
Now for myself I like temporary bolts or removable bolts in high lines that I'm not gonna leave up
or I don't want to leave the bolts because maybe it's a high traffic area. And Bobby
where would you use these? My use for removable bolts is when I am developing a route. So say
I don't have good access to the cliff edge and then I don't have a tree or a boulder to tie my
rope around and get to the cliff edge I'll put in a removable bolt. These are what I use because
they're a dollar a piece and I can just zip them out when I'm done. And they go in a smaller hole
so less to carry, less to use. I can reuse the hanger because the hanger's not getting damaged.
$1. $70. Hypothetically speaking if we needed temporary bolts for something we're not going
to use again aka holding down our hydraulic for the test you're about to see we love our
Titan screws. We use them all the time. Titan screws are not PPE rated and this is more I think
designed for industrial applications. So we like to test bolts for all the situations you would
find yourself hanging from them. So the four point drill bit gives a rounder hole which is
very important because this bolt has a tight tolerance. If you use the two point drill bit
that I have a bunch of it is not going to be super good enough. It was actually pretty hard
to source a 12 millimeter four point bit in the United States and we have that source on
slackline.com store and you can actually get five percent off on that drill bit. This is a problem I
had for over a year with the fixed triplex bolts. I kept getting different 12 millimeter drill bits
and they were not there was a huge range there and so I finally found a drill bit that would work
because Fix at the time did not sell a drill bit on their store and so I had to go to another source.
I'm pretty confident that this 12 millimeter four bit drill bit will work. It's not precision
equipment and it's I don't know when you wallow if you accidentally don't drill it straight and
you start to turn your drill a little bit that could change it. That's definitely bad for these
they say that specifically. Now let's look at the bolt itself. I just feel smart with calipers
and the fact that I'm probably saying that right. 11.83 when I squeeze as hard as I can down and
the hole is going to be 12. So if this goes all the way up that these flanges go all the way to
the end of the hole which means there's no gap here you want to have that gap right there which
means these are not all the way to the end otherwise 13.67 and you're gonna die because
it'll just slip right out because the tightest tightest tightest you're gonna get this in is 11.77
so 11.7 to 13.7 is the range so if it's at 12 obviously it'll be safe. The drill bits are 12.2
still safe but once you hit that mid 13s range this thing's going to not going to grab the sides
of the rock. The whole point is that the wedge of this thing is opening this up and pushing it
against the rock. Let's let's just break stuff I know you want me to skip to that and in case
you can't tell we have chapters in the timeline below so you can skip all this talking if you
don't care about the weeds. Since we like to get into the weeds we have measured our hole
so depending on how I do my angle that is 12 millimeters and we lock it and then you lock it
yeah so this gap right here is really important that means the side flanges are pushing against
the side of the rock and not just chilling at the bottom. How hard is it to pull out?
Well it's locked Bobby. I'm gonna get it to fail. Bobby's our new bolt buster.
Not bad. Oh that's nice yeah the uh fixed triplex bolts are not that easy.
All right so I can see a $70 value sort of. That was so strong I was watching the dynamometer
it gutted the crap out of this thing it ripped the hanger off the bolt actually stayed in
um this is an unusual result for us normally it breaks here like this we may have to angle grind
to get it off great so there's marks in the back side I wonder if that was machined in there or
if we did that look what Bobby just found that is an interesting result
that those snapped halfway down so this is our two point uh drill bit drilled that hole
that's the four point um visually I don't really see a difference so going in the two bladed hole
um it fits in there nicely but we notice there is some movement here um I can feel the bolt
knocking back and forth against the sides of the hole that part doesn't secure it anymore
other than it won't you can't push it down you can't push that down okay let's try the other one
much much less movement so you're saying the right drill bit's important
uh I would say so so something I've noticed with these is the hanger doesn't spin so right now
you can it doesn't you're grinding I'm wondering if we install this at the wrong direction and then
pull and twist under a load wondering if that will compromise it because when you're using
this these flanges seem pretty small or skinny and and if you twisted them would they break
and compromise I don't think they would I'm just overly impressed with this bolt at this point
most hangers don't even break at 47 kilonewtons so I'm pretty jazzed for $70 you better be impressed
so this has now spun and it has this gap under here so it did affect it okay the mechanism
looks to be okay it's straight so we put this in the hole again and I can manually turn it
and basically it's anti-climactic it's not damaging anything and the new ones I believe
have a free rotating hanger here so it's that's I don't believe worth testing further
what I do want to test is if you were to have the carabiner get lifted up for whatever reason
this is a lot easier with the other carabiner but that is what they specifically say not to do
that makes me want to do it there is six kilonewtons on this what's funny is this
bolt's pretty amazing but they say you're not allowed to like fall or anything on it
it's just meant for like repelling and doing window washing but that snap that pin off
that gap under there is because this side of the rock is higher but nonetheless that's what
happens when you do it wrong oh wow it came out really that that should go on the museum wall
okay so we just got to do the ultimate twist test because it rotated 180 degrees and then we kept
pulling so you're gonna damage a 70 bolt but you're not gonna die die they just you won't
be able to get it out again no you wouldn't that is really cool carnage ah it's it's coming off
that other pin too so it's these side plates eventually come off yeah so what do you think
of these mike i'm enamored by them yeah we have a set full sitting in a rigging room that we've
so it's nice to see how these are gonna break pull the sleeve back
set it and forget it all right let's pull it she's holding she's holding
oh she's still holding oh she's gonna blow she pulled out that is not reusable
slightly deformed but it's mostly damaged the location it's supposed to be sitting
i don't know if i can nope i can't fix that i did push this back together
oh wouldn't that be fun if we could use this again oh wow it's holding or or it's not oh wow
okay that was definitely less than the previous time you're not supposed to be whipping on these
anyways they're only supposed to be used in it looks like repelling situations which is pretty
impressive for a 40 kilonewton bolt so put in the comments below whatever we said wrong
whatever you know more about these and where you use them i don't know anybody personally that uses
these and i learned a lot from people in the comments i'm sure you learn a lot from people
in the comments below because they're always correcting me which is good it's a self-correcting
system if you made it to the end of this video you win a free subscription to this channel uh just
click that subscribe button and you are entered into win uh please click the like button and these
um subscribe things they really just change my life they don't cost you anything um if you want
some swag go to slackline.com slash store if you'd like to donate because this is a multi-day project
to film a couple of these videos not to mention all the hydraulics and the drop tower we're building
slackline.com donate uh is there anything else i need to plug bobby
he says that's good see you in the next episode cheers