DIY ELECTRIC FIREPLACE MAKEOVER *under $900* (Stone, Mantel, & Built In Shelves)

Buildable Earth
37 followers
2 Video Views·Nov 3, 2022
The moment we have all been waiting for, the fireplace makeover.
In this video, I am sharing with you all the process of taking this
basic wall and turning it into a dreamy fireplace makeover.
If you're not already subscribed, make sure you do so because on this channel,
I cover all things DIY home design and decor. So without further ado,
let's get into building a DIY electric fireplace mantle built-in shelf system.
I'll talk about reviewing our planning process in depth for this video, however,
it's already going to be long enough so I think I'll just save that for another time.
To get started, we drew an outline on the wall of where we planned on building our frame
and where the built-in cabinet and shelves would go.
From there, we removed the baseboard so we had a flat wall to work with.
We then measured about 12 inches from the wall to accommodate the depth of the cabinet
and future rocks so that way they all ran flush.
We then took those measurements outside to build the frame.
I originally thought we were going to use 2x4s, but we ended up using 2x2s instead.
It was perfectly fine and sturdy in the end.
As the frame starts to come along, you see where the space is left for the fireplace and the TV.
What is really important when building the frame is to make sure that the structure is sound.
We ensured that the frame was sturdy by adding toggles or
smaller wood blocks every 12 or 16 inches or so to make sure that it was all a tight and sturdy fit.
We manually nailed the frame together with larger nails and then brought it inside for a test fit.
Okay, so we just did the fitting for the frame and when we brought it inside and we held it up,
we realized that we need to make sure that we have enough space in case of TV maintenance
or we need to get to any cables.
Right now, it's easy because there's nothing here,
but once we build the wall, that access is going to be a little limited.
The good thing is that our TV mantle actually slides left and right,
so if we do need to do TV maintenance, we can slide our TV all the way to one side
and then tilt it to get access.
That's good to know if you're doing your fireplace to make sure
that you still want to have access to anything that's behind there.
We also tested the fireplace in the face of the frame as well.
This was good because we realized we measured the wood to the face of the fireplace,
not the actual part of the fireplace that needs to be screwed into the wood,
so we went back and added wood for a perfect fit.
This is a Touchstone brand electric fireplace that we ordered on Amazon,
which I'll definitely link below for you.
The price was not that bad for this wonderful quality.
After we felt good about the face of the frame, we started working on the side pieces
and then once we made them, we brought them all inside so that way we could do another test fitting
and then once we felt comfortable, we started screwing it all together
and securing the frame to the wall and the floor.
The framing was almost done, but I wanted to enclose the TV,
so we added more wood to the back so that way I could lay down plywood
later on to create the enclosure and then we did a final fitting for the fireplace.
And because the girl wanted to save some money on our cabinet built-ins,
I stole our kitchen cabinet.
I've always wanted to do floating shelves in our kitchen anyways, so it worked out.
I'll probably make a video on that in the future.
This cabinet is going to be so great because we can hide our electronics
and we're also going to switch out the hardware so it doesn't match the kitchen cabinets
and look like we just took it from our kitchen.
Wow, this is going to look so cool.
The next day, John's dad came back with some stronger pressure-treated wood
for the frame around the fireplace because we wanted it to be a little bit stronger
and it definitely was.
We also had to move our doorbell slightly down, so we moved it behind the TV.
After the frame adjustment, we cut and added one half inch drywall.
To secure this to the frame, we glued it down using liquid nails
and then screwed it to the frame.
That night, I started working on the mantel because I wanted to get it installed
before they actually started adding stone around it.
So for this, I wanted a rather skinny mantel, so I created my own size.
It's very custom and I still don't have any other saw except my jigsaw,
so this is what I used to cut my wood.
I'm still waiting for Lowe's to hit me up with a collab.
No, but seriously, Lowe's, where you at?
When coming up with the design for the mantel, I created toggles,
also known as these small blocks in the middle,
to create support within the mantel and give me a framework
so that I could install this first piece to the fireplace setup
and then nail the front top and bottom while it was already screwed onto the wall.
I'll get to that part shortly.
For the stone installation, we used airstone from Lowe's.
Before gluing using the airstone paste,
we planned out the first row or two to feel comfortable with the way the stone's lined up
and plan how we would combine it aesthetically to make it look natural.
If you're planning to do a DIY stone fireplace,
I highly recommend using this airstone.
Not only is it significantly lightweight, but it's also made out of recycled materials.
It only takes about 30 minutes for the glue to cure,
so if you make a mistake and need to remove a stone, you can.
With the airstone, they even sell boxes of corner pieces
so that you have a nice rounded finish at your edges or where a wall ends.
They even have videos from the company itself on how to apply it,
which I will link in the description for you.
To cut the stone, you can either use a handsaw or a power saw,
which also creates a lot of dust and is a little smelly.
While simultaneously working on the stone and the built-ins,
I started by screwing in the first white shelf,
and this is so that way when they started putting the stone,
they could cover up the white shelf too.
I went to Lowe's to get some plywood cut down,
which I brought back and glued and nailed down to enclose the TV.
For the stone to set and not fall,
we added a temporary piece of wood above the cutout for the fireplace
so that the stone dried level.
We removed that wood later after the stone fully dried.
Adding the mantel also helped us plan out how the stone would fit around it.
We definitely had to make some custom cuts to make it all flow evenly.
I was really proud of how this mantel idea worked out.
It probably would have looked better if I either bought wood
similar size to what I was going for or if I had a better saw.
Now you can see what I was mentioning before,
where we nailed the top, bottom, and then the front.
I did make some carpenter's error in my constructions of the mantel,
and it was a rookie mistake to think I could fix it with wood filler.
If you are watching this, please do not do this.
Do not ruin your project by using an entire bottle of wood filler to act like wood.
It's meant to fill nail holes and nothing more.
I do think there is stronger wood filler out there to help with this,
but this is what I had on hand.
Anyways, I love sharing my mistakes because we all have them and we all learn.
It's 100% okay because we're doing things ourselves.
I mean, come on people, you gotta be proud of that.
I tried my best to sand it all down and even knock out some of the yellow
hues from the wood filler, but alas, it's perfectly imperfect.
I'm very grateful it's the top that I messed up and not the front.
Because I have a bad track record with staining wood,
I was beyond thrilled to have found a wonderful stain combination
courtesy of Angela Rose Foam.
I'll definitely link her website below because she's a DIY queen.
After applying pre-stain, I went in with this Early American and Weathered Oak.
With the Early American, it gives a touch of brown,
and then I went in with the Weathered Oak to
knock off some of that gold-yellow tones that are in the Early American.
And unfortunately, my camera died as I was applying the Weathered Oak,
so this is footage from my phone instead.
Anyways, this stain combo is magic.
Thanks, Angela!
And of course, I went in with the final clear coat of polyurethane.
As I made progress on the stone, I started installing the cabinet.
The first thing that I wanted to do was cut out the outlet box so it was still accessible.
I piloted the holes first and then used my jigsaw to cut out the hole.
I even took off the outlet plate so I could get the exact shape right.
The next thing I did was screw it into the wall and fireplace.
It's really important that when you screw it,
it reaches a stud or else it will not be fully level or supported.
The next thing that I did, and probably one of my proudest moments, was drilling this hole.
I had to drill through the cabinet and the white shelf
so that way we could run the cords through to the cabinet.
To do this, you need a strong battery charge for your drill,
increased power, and speed.
This was no joke on my end.
I had to go back and use my oscillating tool to remove more of the baseboard
so that way we could fit the second white shelf.
To secure the shelf to the cabinet,
I used the same wood screws we've been using for the whole project
and found a drill bit the same size as the screw
so that way I could drill a bit of the hole first to ensure the screw goes in deep enough
that I could then cover it with caulk later and make it flush.
After screwing the shelf to the cabinet, I made sure it was level
and took my corner brackets to secure the shelf to the wall up top.
Now this is not the best way to create this, I'm sure,
however this is what we did.
It worked out perfectly for us because there wasn't much space before the staircase began
for us to add more of a structural framing for the built-in.
In the end, it's still pretty sturdy and I paint over the brackets to make them more invisible.
I wanted to see how the stone was going and wanted to point out a few things for you
if you're doing this.
Sometimes the stone begins to slant,
so what they did was added little small pieces of stone in between to keep them level
so that way the next row would be even.
They also added this piece of wood just like down below
so that way when they set the stone on top it could dry all level
and then we can remove that piece of wood later.
With the corner edges, we also did it around the TV as well
which again, I really like the corner pieces of this airstone.
Also for the corners, they alternated where the lines and stone met up
similar to how we did with our flooring so that way it looked a little bit more natural.
After they finished the stone, the last step was for me to finish the shelves and install them.
I used the same stain combo as the mantle.
Pre-stain, early American, weathered oak, and a top coat of polyurethane.
Installing them, I used four of the same corner brackets I used before
and made sure the shelves were level.
Well, I hope you guys loved this video!
If you did, leave a comment, like, subscribe, do all the things!
This was probably our biggest project and I know I say that after every video
but it just seems like the more we learn and the more we keep dreaming,
the more projects we do in this house which is great.
I think for 2020 though, that's going to be about it as far as our big projects go.
If you have been here for the ride and have seen us transform our house,
thank you, thank you so much!
I see you and you are very much so appreciated!
So, well, with that, I will see you guys on the next video!
Bye, guys!
The moment we have all been waiting for...
