Intarsia Knitting for Beginners + CUTE Hat!

Handy Creators
62 followers
51 Video Views·Oct 29, 2022
If you're looking for a fun Halloween project this year but you kind of want to challenge
yourself a little bit, this colorwork knit bat hat might just be the project for you.
With this little hat you can learn how to knit with two colors at once,
a really cool technique if you want to make some interesting projects,
and how to catch long floats, another technique that's really necessary to know for colorwork
You can have it worked up in a couple of short evenings and enjoy it this Halloween.
Now I know I always say this but the yarn really makes this project more interesting,
this time with the marled kind of heathered look in this sugarbush shanty yarn.
If you do decide to substitute for this pattern you do want to check your gauge
and make sure it all matches so your hat fits as you expect it to.
Now if you're new to this type of yarn and how it comes in hanks, kind of a braid like this,
the first thing you need to do is unwind it. We can't just use it straight as it is
if we were working with a skein or a cake of yarn. Remove the ties and wind it into a ball or a cake.
Now if you haven't seen yarn like this before, you probably don't have a yarn swift or a ball
winder. That's honestly the most efficient way to take a hank and put it into a usable
cake or ball of yarn. So as you can see if you don't have one, no worries, lay the big long loop
around your knees if you're by yourself and just wind it around your fingers and wind it into a ball.
Okay so first up, the cast on. So wrap the yarn around the needle 20 times to guesstimate how
much yarn is needed for 20 stitches. Then fold it over however many times you need for your cast
on number. As always you can view the pattern completely for free on my website, or if you
prefer to have a copy in hand to print or save for later, you can pick up the pdf from my shop.
I'll have a link to both of those options in the description below so you can do what works best
for you. Now if the long tail cast on is new to you, go ahead and drape the yarn over your needle
and make sure to steady that with your finger and gather it in your hands like this.
Then swing the needle down and grab the loop on your thumb, swing it up and grab the loop on your
finger, then drop the thumb loop over the tip of the needle. Then keep going for as many cast on
stitches as you need for the size you're making. Alright when you have all your stitches cast on,
lay it flat like this and make sure the braid is along the inside and there are no twists. That's
really really important. You'll also need to add a stitch marker so you know where the beginning of
the round is, and then knit the first stitch to join the two ends together. Then knit the
second stitch as well. So the next two stitches will be purl stitches, so go ahead and pull the
yarn forward and purl twice. And that's the repeat, knit two, purl two. If you've done
everything correctly at the end of this first round, you should end with two purls. Then
pass the marker over and work the same repeat, knit two, purl two. And that's all we'll do for the
band. Another way to look at it, if it's easier for you to visualize, you're knitting the knits
and you're purling the purls. So that's the band repeat for this pattern, just a two by two rib.
Now the length of the band is a little different for each size, so you'll want to refer to your
pattern again for the number of rounds you should work this repeat. And when you get that finished
it'll look something like this. Now before we start the color pattern, we first need to knit
two rounds, and that's the same for all sizes. So go ahead and knit every stitch for two rounds.
So here's the color diagram you'll be working for the color work portion of this pattern.
Each block represents a knit stitch in the gray or the white color, and it spans 41 stitches and 25
rows. Now in your hat you have more than 41 stitches each round, and you will have more than
25 rows. Just keep that in mind for later. So if you look down here, this block represents the first
stitch of your first row. So you've got a one and a one. Now this stitch over here would be your 12th
stitch of the second row. So that's how you read the diagram. The numbers on the bottom are your
stitch numbers, and the numbers on the side are the row numbers. And if you look at the first two
rows, there are no white blocks or no white stitches, and that's the two rounds we just did
where we knit every stitch. So next we'll pick up on the third row here, and we have 20 gray stitches
first, followed by one white stitch. So I've knit up to that point, and I'm ready to add the first
white stitch. So get your white yarn ready, loop it over, and insert your hook into that next stitch,
the one that's a white block on your diagram. Then loop the new yarn, the white yarn, on your needle
and pull it through to finish the stitch. Then it's a good idea to tie this to the back and secure it.
Now going back to the diagram, that's the only white stitch of this round, so I don't have to
worry about knitting with the white again, but we will need to carry it along the inside so the floats, or the
stretches of yarn in your non-working color, don't mess with the sizing or catch on things as you're
trying to wear this hat. So as a general rule of thumb, you'll catch the unused yarn after working
about four stitches. There's a couple different ways to do this. First is what you might do the
first round or two when you're still kind of figuring it all out and figuring out how to work
with two yarns at once. And the other way I'll show you, you'll probably do as you get more
comfortable working with two colors. So for this more simple technique, insert the needle first
and wrap it with the color you want to catch. Then pick up the working color, the working yarn,
and wrap the needle as well, but remove your first color wrap from the needle before you finish the
stitch. Now you see the white yarn is caught along the inside and I can work four more stitches before
I have to do that again. Now I know what you're thinking, this is terrible. It's slow, it's clunky,
and there's just no way I want to do that for an entire project. I get that. So here is the more
efficient way to carry floats along the back side of this project. Now the first thing you'll need
to do is get your color situated first. So hold them out from the project and make sure the color
you want to carry, the white yarn in this case, is underneath the working yarn. Then gather both of
them in your hands. And now to catch the yarn in this way, you'll insert your needle to knit. Make
sure the needle is below the other yarn and knit as usual. Then as you're working your next few
stitches and you don't want to catch the yarn, make sure your needle is above it when you knit those
stitches. So there's a couple different things you're keeping track of throughout the colorwork
portion of this pattern. The color diagram and working the colored stitches as shown there, but
you're also catching the non-working yarn when you're beyond those 41 stitches. And you're doing
so every four or five stitches. Now I know it sounds like a lot to deal with, and to be totally honest,
it kind of feels like it for the first couple of rounds. But the more you work through it, the
easier this will get. You'll be catching the yarn like a pro and only focusing on the diagram at the
beginning of the round when it's needed. I don't do this type of knitting a lot, so although I already
knew how to do these techniques, I still had to kind of warm myself up and it took me about five or six
rounds before I was knitting like this. Just remember when catching those floats, when the needle is
under the non-working yarn, you'll catch it in the stitch. And when the needle is over the non-working
yarn, you won't catch it in the stitch. So with the techniques you just saw, work yourself through the
colorwork portion of the pattern. We'll pick up with the crown decreases next. So this is what your
project will look like when you have the color diagram completed. Now for the crown decreases.
First of all, you can go ahead and trim the white yarn. You're not going to need that anymore.
And make sure to keep your marker in place. Now for all of the sizes, you'll work some number of
knits before the first decrease, and that number is size specific. So you'll want to refer to the pattern
for the size you're making to get those specific numbers. And then my decrease, which is a knit two
together. So to work that stitch, insert the needle through the next two stitches and knit them as if
they were one. Then your repeat begins. Work your knit stitches followed by another knit two together.
Then every decreasing round is followed by a knit round. And then we'll work another decreasing
round. Are you seeing the pattern here? This time the number of knits before the decrease is one less
than before. So I had 12 stitches between my decreases before. Well this round I'll have 11.
Then my knit two together, and repeat. So that's the general theme for the crown decreases in this
project. You have a decreased round followed by a knit round. And every time you come to a new
decrease round, you'll work one less knit between the decreases. Now as you continue to decrease,
eventually the stitches will no longer stretch around the needles. When that happens, you need
to transfer it to a set of double pointed needles, or in my case, a longer corded set that's in the
needle size, so I can work the remaining rounds using the magic loop method. So transferring
the stitches is as easy as knitting the stitches onto the new pair of needles.
That being said, it's best to make the transfer on one of your knit rounds, not your decreasing
rounds. You will want to switch over to a locking stitch marker if you have one, or a paperclip or
a locking marker. And you'll knit half of the stitches on the new needle. Then slide it through
a little bit, flip it, and work the remaining stitches. So this will create the loop on the
side you need to make it all work. Okay, when all of the stitches are transferred, flip it so the
working yarn is towards the back, and slide the front needle through the stitches. Then pull the
back needle out, leaving a little bit of cord on the side, and continue knitting with that needle.
Now this is probably a decreasing round for you, so don't forget to work your decreases
when you're supposed to. And when you get to the end of the row, flip it, push the front needle
through the stitches, and pull the back needle out of the stitches. And that's always your starting
point for the magic loop. The front needle is where you work the stitches off, so the stitches need to
be on the needle. And the back needle is the one you use to knit the stitches, so you have to pull
that out and put it in place. Keep going with your crown decrease pattern, and we'll pick up with the
finishing techniques next. You'll have a few stitches left on your needles for all sizes when
you finish the crown decreasing pattern. And make sure you trim yourself a nice long tail. Thread
that tail on a yarn needle, then insert the needle through the first stitch knit-wise, and slide it
off. Then into the next stitch, and slide it off. And keep going for all the stitches on your needles.
Then pull the tail to fasten it up, and run it around the opening several times to secure it.
You may even want to flip it inside out, and run it along the inside as well before you trim it off.
I found this pom-pom in my collection, and it matched perfectly, so I decided to add it to my
hat. Now this step is totally optional. You can use a faux fur pom-pom like this. You could make a pom-pom
yourself, or you could not have one at all. Then all that's left to do is weave in the ends along
the inside. That's all for now, friend. I hope you enjoy this project, and it opens up your world to
even more colorwork knitting projects. Don't forget to check the description below if you have
any questions at all about the supplies I'm using, or the pattern. You'll find links to the pattern
there, which should answer any question you might have. If you haven't done so already, I would love
for you to be a part of this community, so hit the subscribe button so I can keep inspiring you to
make something that makes you happy. If you are subscribed, I just want you to know how much I
appreciate your support, watching, liking, commenting on my tutorials. That stuff, although it doesn't
seem like much, is an incredible help, and it really keeps this channel alive and thriving.
There's honestly no way I could keep doing what I'm doing without your support.
Happy knitting, and I'll see you in the next one.
