Repairing Inside Corner Cracks, over 20 inside wall cracks done quickly

Building in Progress
145 followers
5 Video Views·Oct 27, 2022
Wow, I got hired to fix cracks all over this crack house.
Not that kind of crack house.
It just had cracks everywhere in the walls
and on the inside angles.
And that was due to settling of the foundation,
which they've resolved.
And I'm gonna show you how I fixed that next.
So what we got is this ugly crack
all the way up and down this inside angle.
This one was caused by settling.
This is a modular home.
They poured the foundation when it was wet.
They didn't do it right.
Well, they've now came back and fixed it.
But since that, or before that,
they came in and they tried to caulk it and it re-cracked.
Well, we're gonna show you how to fix that the right way.
So because this is actually cracked and sticky now,
we actually have to clean that up.
We can't just caulk right over it.
We are just gonna caulk it.
But first thing we wanna do is cut out down both sides
and just try and cut out to the cracked part and no further.
So, and I'm gonna cut straight across here
and come down this side
and make sure you have a nice sharp utility knife
and just take your putty knife.
Now it's ready for caulking.
Okay, if you get a really deep one,
like we got right up here,
that may take two coats of the caulking.
So I'm gonna show you.
For caulking, what I like to do
is put the label straight up, cut a 45.
That way, if it rotates, you always know how to realign it.
I'm using this fast dry latex caulk with silicone,
not pure silicone.
We gotta lay in quite a bit on this one.
So we're trying to kind of round it out a little bit
and fill it in.
So use a wet cloth, wet your finger
and just go down through here,
try and do it so you guys can see what I'm doing.
Now I'm just gonna wipe off the excess on this tape.
And then what you can do to round this out
and smooth it out better
when you gotta do that heavy fill
is take your wet cloth and make it into a ball.
Okay, so once you smooth that out,
wipe it until you get it to where you want
and that's gonna be good enough for paint.
And once you paint that, it's gonna look pretty good, guys.
Hey, let me show you another way that works pretty good
for smoothing out that caulking bead
and a lot of you will like this.
Okay, so we'll run a bead of caulk right up through here
and that should be a decent little bead.
And then we'll see about smoothing this out now
when I do this with my finger, I wet it.
So I'm gonna wet this thing and start it out that way.
Now the angle you hold it determines how much it wipes off.
So we'll go a little steeper.
Okay, I actually didn't put enough caulking in there
for this thing.
So let's put a little more and do that again.
So I finished off that little spot there with my finger
cause it didn't have quite enough,
but overall I'd say that actually works.
So if you struggle with caulking, can't get a nice bead,
try one of these.
I'll put a link to it in the description.
And hey, you can see everything came out nicely.
Now, hey, if you're into short
and sweet drywall training videos,
check out my three minute drywall school coming really soon.
I'm already editing videos.
We'll be launching those soon.
If you like things like woodworking, automotive
and general vlogging, check out my other new channel
called That Kelter Guy Creates.
Links to all of these in the description.
