Making an EASY DIY Bench for Beginners | Woodworking

D&P
34 followers
13 Video Views·Oct 24, 2022
Here's how you're going to make a simple yet modern bench for your dining room or inside your house.
I chose this modern design with these metal bases. I'll have a link below in the description box for
those. And I went with cypress lumber for the top. It's got natural rot resistant properties and it
has a really cool rustic look. After choosing the lumber, I first went over to the miter station.
I want to cut several of these planks down to approximate dimensions as I'm getting ready for
the milling process. Once I completed all the rough cuts for the two bench tops, I then laid
them out on my table and I wanted to make a few reference marks on where I was going to place my
hand pressure for the jointer. Squaring these things up are going to be very critical. Here's
a pro tip. Well, did I just call myself a pro? I'm not a pro. I do have some great machinery and tools
but calling myself a pro, I wouldn't say that's quite right yet. At least not this stage in the
game. But in case you didn't know, if you don't have this machinery, you can order wood pre-surfaced
or pre-milled from a sawmill and it doesn't cost a whole lot. For example, if I wanted to order
these cypress boards from a sawmill and had it pre-surfaced, which means squared up, it would
only cost me about 10 cents a linear foot. So it's worth the time and especially worth the effort
if you don't have the extra tools. Another DIY tip for beginners, make sure you alternate the grain.
You can see they're up and down here. This will offset seasonal wood movement and when I first
started this business seven years ago, for whatever reason, I refused to believe that that mattered
and I almost went out of business with all the warpage that I was receiving from my tables.
I had to build several tables for the second time, which meant no profits. It almost crushed
me in my business. Don't skip this step. It's super vital. I get asked quite frequently,
what tools would I recommend when starting your woodworking journey? And I always say, get clamps.
They're absolutely vital. I didn't begin my journey with clamps because I started this business
bankrupt, food deprived, and almost homeless. So I didn't quite have the money to purchase clamps.
In my case, when I started, I used to pocket hole all the boards together and join them with screws
and that works too. So if you don't have any clamps, that's fine. You just got to make sure
you alternate those end grains. The metal bases came raw. I kind of like this because I can put
my own finish on it. It won't be powder coated, of course, because that's premium, but I did get
a can of spray paint and I'll have it linked in the description box below. It came out really nice.
You can see here how dull and flat it is as the client didn't want any type of sheen to it.
And sometimes a powder coat can relieve a really slick look, even when it's a matte version. After
my tops were glued up over four hours, I ran them through the planer just to clean up the rough glue.
That just saved me a ton of time and sanding and it makes the process a little easier.
Now I'm going to align the metal bases on the bench tops so I can make my reference marks with
where I want to place them. We're going to have to route a little space where they're going to go
and this will offset any type of movement like racking or shifting back and forth as you want
these to be completely strong. I'm going to go a quarter inch deep on the routed inset for these
bases. Now you could get away with three sixteenths, but I wouldn't go anything less than that. I find
that a quarter inch is the sweet spot and that's what I would go with. I love watching these videos
as I do a voiceover because it's really fun getting to see myself make it. But something I
want to disclose with you is this routing process actually wasn't as simple as the video appears.
Although it's pretty straightforward, it gave me a crushing migraine just due to how I had
to hold my neck and the router at the same time. It was really difficult. The process is easy,
but come on, everything you do in woodworking is going to take a little muscle and a little effort
and it would never be as simple as the video makes it look, right?
The bummer about going with cypress wood is it's generally pretty old and it usually comes with a
lot of cracks and knots that you have to stabilize. I love using this CA glue. I'll have a link down
below for it. And in case you're wondering why I'm using white, it's because I had already
previously made this client a dining table and they had white epoxy resin in all the cracks.
So this is just helping it match. They didn't ask for it, but I thought it would be really cool
and turns out they were super excited when they saw what I did.
Time for a little finish work. I love this stage of every build because it means it's rearing the
end of the project and it's really satisfying to spray. I've got this Wagner sprayer and I
love it. It's really good. It's a DIY sprayer. It's a great one for beginners. Since this video
though, I did step up my game and got a Fuji Q5 and it is amazing. But this Wagner gets the job
done and I still use it today. I just kind of use it for outdoor projects. Instead of watching the
finish dry, let's take a nap. Now you're still going to get seasonal wood movement, contraction
expansion every season. Now with the holes on the base, I drilled them out to be a little larger
than a quarter inch and the screw shank itself is a little less than an eighth of an inch,
which means I have greater than an eighth of an inch all around the diameter of the screw shank
for movement. Now you could drill extra holes so that way they would be slotted in the metal base.
That's actually ideal, but I have found that when it comes to benches and a top that's no greater
than 18 inches deep, this is more than sufficient. Well, I hope you guys enjoyed this video and I'm
looking forward to the next one. Don't forget to subscribe and turn that bell on. I'll see you
later. Peace.
