DIY Fireplace Surround and Electric Fireplace Insert Build

How Do You Do It?
70 followers
76 Video Views·Oct 23, 2022
Hi everyone it's Melissa from Welcome to the Woods. Today I finally get to share the big project
that's kept me very busy the last month. I built a modern fireplace in my living room to be a focal
point where there was once just a blank wall. You might remember that I just redid our ceiling in
this living room and now those beautiful beams are going to guide your eye towards the center
of the room which is going to be this gorgeous concrete fireplace. The first thing I did was
build up framing and I this is my first framing project I did from scratch. I'd never like framed
up a wall by myself so part of me really didn't know what I was doing but I understood the basics
you know 16 inches on center build boxes and then connect those boxes to the wall the floor and
together. Because where I live in Minnesota is now freezing cold almost all of my cutting was
done indoors and I was happy to have a shop vac hooked up to my little miter saw to get all this
done without a huge mess. The depth of my fireplace surround that I am building out from the wall
is about 15 and a half inches and the whole thing is about 107 inches tall. My ceilings are just
slightly lower than nine feet. This project is actually sponsored by Dimplex. They gifted me
one of their amazing electric fireplaces to build this out their Optimist Pro 1000. It is so realistic
I can't wait to show you guys near the end of this video so stay tuned. But basically the fireplace
I'm going to be putting in is 40 inches wide so when creating my framing I decided that 67 inches
68 inches somewhere in there was where was how wide the surround was going to be. The opening
for my fireplace's heater box had to be rather large so I created this structure you can see here
where I have horizontal 2x4s coming across the front framing. Then on those horizontal 2x4s I
built down little you know blocks of 2x4s to create 16 inches on center studs on both the
bottom and the top. Now on top you can see I'm like I'm getting it attached to the ceiling right
now. Initially I decided to just do studs in the surround but then later I changed my mind and I
did end up putting in some blocking because my husband and I are still undecided if we're going
to ever put a flat screen TV up above the fireplace. He really wants one and I really
don't. We actually don't own a TV and I don't love them so maybe you guys can help me vote in
the comments if you think we should get a TV above this fireplace or not. I wanted to point out too
that you may have noticed that my framing is enclosing multiple outlets as well as a cable
inlet for a television. So this is fine because I can cut into my framing in the future if need be
to access these and actually the bench that I'm going to be building next to my surround I can
access from underneath to get behind and like plug in the fireplace and unplug it if I need to
service it. Because my framing for the surround is running into the 2x4 supports I ran along
the ceiling joists for my beam I'm going to just attach the fireplace surround framing to that 2x4.
You can see that I'm drilling kreg jig holes to do that so I can drill my screws up at an angle
into that 2x6 in the ceiling. So the bench that goes next to this surround is going to be built
in a similar way just creating boxes. These I screwed into the fireplace surround. I also
screwed it into the wall studs and the wall stud on the rightmost side was actually like
lined up right with the edge of the bench. So again I used my kreg jig so that I could access
that stud and really get the bench secure. I could have made this a floating bench because the system
the 2x4 system I made was very very strong in fact I climbed up on it and jumped on it
it didn't budge. But instead I decided to build some structure along the front just for extra
support if people are sitting on it and this also allows me to screw in the drywall because
I want to drywall the whole front face of this bench. Next it was time to actually place the
Dimplex Optimus Pro 1000 box heater in its spot. You can see that it is resting on my framework
where I put another 2x4 across the back of my framing and this supports like the back of the
box heater. This is totally level. Now I'm putting the cassette inside. This is the part of the
fireplace that actually creates the flame effect and we're going to be installing that later after
all the drywall work is finished. So in the meantime I just left like the cardboard inside
to prevent scratches and the plastic over the cassette to prevent any dust from getting in the
mechanics. All right y'all let's drywall. I actually really hate drywalling. I have some
drywall experience unlike framing. I drywalled a couple rooms in our house upstairs. I did the
taping and mudding and painting and then downstairs in our dining room renovation and around our front
door I both hung the drywall with help from my father-in-law and husband and then also mudded
and taped etc. It is so labor-intensive. Anybody out there who does drywalling for a living
kudos to you. So because this project was pretty small although I dreaded drywalling I decided I
was going to DIY and I am going to take you out in my garage now to show you where I was cutting
the drywall. Excuse the poor lighting. My garage does not have good lights. Before I started
cutting my drywall I planned out very precisely where I was going to make my cuts to make the most
of the three sheets of drywall that I purchased. If I cut them wrong or I didn't cut them a certain
way then I wasn't using the majority of the sheet and I was going to waste drywall. I was going to
use four sheets etc. So I basically scored the paper side of the drywall with a utility knife
then I turned it down and banged against it. It folded and again I ran my utility knife across
the drywall side the gypsum board side to actually release the cut. On the parts where I had to cut
like a U or a C shape because it was going around the fireplace heater I wanted a very precise
cut because I don't want to add any trim or casing around the fireplace box. I just want the drywall
to get as close as possible. So because of that I used my oscillating multi-tool to cut out what
I marked and this was a very good plan. The oscillating multi-tool cut through the drywall
like butter it was the perfect way to get a precise cut for around the fireplace itself.
For the drywall joints I used metal corner bead just because it's nice and sturdy. I'm assuming
that my kids are going to nick this up quite a bit since it's in our living room and then I used
the mesh tape like the grid tape that's sticky for a lot of the flat seams and then the like
perforated corner tape with holes in it. It's also adhesive for the corners where it met the wall.
Now it is time for mud. I'm using like a joint compound that's an all-purpose for the first
two layers of mud and I did a third layer with a very wide drywall knife I think it was 12 inches
wide. I'm using a fine finish mud so my surround was very flat and I did spend probably a week in
total like between hanging the drywall taping and mudding it so I'm certainly not fast but I'm kind
of a perfectionist and yes I did end up adding tape you can see that I initially started and
had forgotten to add tape. After the second and third layers of mud I also sanded with my random
orbital sander hooked into a shop vac as well. So I wanted to invite you guys right now to come
follow me on Instagram. I know I say this every video but seriously you guys if you aren't a part
of the behind the scenes action you are missing out. On Instagram stories you can watch me build
things in real time and you can take part in surveys and like polls to help me decide things
like if I should put a mantle on the fireplace and how high I should put the flames when I'm
installing the heater box. So go ahead and follow me the link is in the description on the video or
you can just search my handle at welcome to the woods blog. My drywalling did end up being close
enough to my fireplace box that I could just run a bead of caulk along the seam and it totally
disappeared. I love that my drywall is seamlessly installed right up to the fireplace so that I
don't have any trim work and it looks super modern. Of course painter's tape is invaluable here to get
a really crisp caulk line. Okay let's move on to this bench. For the bench top I'm using three
quarter inch plywood that I cut to size and creating a lip along the front to make it look
like it's a thick piece of wood. Now what I should have done was miter these corners but I made my
cuts before measuring twice, a big no-no, and I ended up having to do a butt joint here. It's not
going to look great but I decided in the end to hide it. I'm just going to paint the top of the bench.
So I'm using wood glue and some finished nails to connect the strip of three quarter inch
plywood to the main top of three quarter inch plywood. Then I covered the seam in wood putty
as well as any other imperfections and the next day when the wood putty was dry I sanded, then I
primed, and then I painted with two coats of my favorite black paint. You can find all of the
materials, tools, and products that I use in this video listed in the description. The top to this
bench is meant to flip up so I can use the inside of the bench as storage. So you can see I installed
a 36 inch long piano hinge on the little strip of three quarter inch plywood I cut for the back
of the bench. This is similar to like the strip I cut for the front lip. And then the other side
of the piano hinge of course is going into the main seat area. So I'll show you how I installed
this. It was pretty easy, just involved a lot of wood glue again and finished nails. I lined
everything up where it needed to be and then shot those nails down to secure the glue. The little
strip of plywood I cut is both glued and nailed into the two by four framing of the bench. So far
it's held really well. I think this is strong enough to withstand opening and closing of the
bench axis. My kids like love this little bench. They have been playing inside of it non-stop. It's
the best hide and seek spot. For the finishing of the fireplace I'm doing a concrete look like
I mentioned earlier. I actually used an awesome kit for this but it was a pretty involved process.
So I want to break out that information for how to get a full concrete look from drywall
in a different video. So my next video I'll go into details about the step-by-step process to
transform drywall into concrete for my fireplace surround. I wanted to make a quick mention that
somewhere in the midst of all this I also painted the walls of the room white. I wanted the creamy
cloudy look of the concrete surround to be the focal point and the last thing I would want
is for the light gray walls that look a similar color to detract from that. So after I was done
with the concrete surround I cleaned up my mess. It really did kind of splatter everywhere
and when I pulled up the frog tape I was so happy because a lot of my lines ended up beautifully
crisp. I did caulking along the floor edge because again I ran the drywall straight down so there's
no quarter round needed and then I ran a bead of caulk along the wall too so very little mudding
was needed in this project. I was really happy with how precise my drywall cuts were. I also
installed trim along the doorway next to the fireplace. Lots more trim is needed in this room
makeover but that's coming in the future and then of course I cut the beam on the ceiling to length
because originally when I installed it it went the entire length of the ceiling and then we hung
that up again. My husband had to help hold the other side. If you follow me on Instagram you
know exactly why when I was trying to do this myself it was not a good idea. Finally the last
thing to do was to install my awesome Dimplex fireplace. The Optimist has technology where
although it's electric, woogie woogie woogie, it makes fire by water vapor so it transforms
like water into a mist that's three-dimensional and creates steam which looks like smoke.
It is gorgeous. You can see here that right now I'm wiring this in. I got a plug kit for mine so
all the wires to the box heater and to the flame cassette I just wired into the corresponding
colors on the plug kit. That way I can easily plug it in and out of my receptacle which I
mentioned earlier I can access from inside my bench but you can also hardwire this fireplace.
Similarly you can get a plumbing kit for this fireplace and have water automatically feeding
to the unit constantly so you don't have to refill it. I chose not to do that because I
didn't want to get a plumber involved in my install and I'm not comfortable plumbing myself
so I am using these little jugs that come with the fireplace. They run for many many hours so
this was not a big deal to me that I just refill this every so often. These jugs you fill up with
regular tap water and they make the magic happen. Dimplex was so kind as to also send me
two of the log kit assemblies. This makes the fire look so much more realistic to have these
logs that light up and look like they're glowing embers and then also a glass front. They send a
real fast but you have to wait 45 seconds for the flames the steam to start and once the steam
starts it is so magical. The fireplace also comes with this beautiful crackling noise it sounds
exactly like a real fire. My favorite thing about the flames is that they dance and they have so
much movement to them and each one is unique just like watching a real flame burn. That's what I
don't like about a lot of other electric fireplaces is that the style of flame even if
it's three-dimensional can be repetitive. Not this one because obviously you can't control
how water vapor behaves. So I'm giving you some close-ups here just to show you how amazing
the flames are on this Dimplex fireplace. If you guys are interested in one of these I highly
recommend it. They're linked in the description and again I want to thank Dimplex for sponsoring
this video. Isn't it crazy to look back at where I started with this blank boring wall and where I'm
at now after a lot of hard work and perseverance. To be honest I did not have a lot of confidence
in my skills during this project and it did push me to learn a lot. One thing I kept reminding
myself is that DIY doesn't take confidence it takes courage. It takes the ability to fail and
learn from your mistakes. I now have the most modern and sleek fireplace that I never dreamt
possible in my 130 year old farmhouse. I love the way that you can see this fireplace right when you
walk in the front door because our foyer is adjacent to this room. Don't worry I'll be adding
a mantle to this and some Christmas decorations soon coming up in a future video. But for now
I'm just like really enjoying sitting by the flames at night and listening to the
really calming little crackle. I had a request from a commenter on my last video ask about what
it's like building with three kids around so I decided to include just a couple outtakes that
I accidentally caught on camera. Mom can I have my movie time please? Yeah it looks so good!
Why don't you have warm enough clothes on then?
I don't. Can you play no fish with me? Um I'm sorry buddy I can't because I'm working on this.
You know if I had a guess how it was gonna go for you I'd have said you'll probably cry and
think it's not turning out well and then it'll be just fine.
