Midea 8,000 BTU U Smart Inverter Window AC Installation and Review

How Do You Do It?
70 followers
4 Video Views·Oct 30, 2022
Is this the coolest AC ever? Well, I don't know many window units that let you do this.
So in this video, I'm going to give you my thoughts on this MEDEA U-shaped air conditioner
and I'm going to show you how to install it. And we're going to do it right now.
So here is an 8000 BTU air conditioner from MEDEA and it has a U-shaped design.
I had never heard of that. I never knew what it was until this company MEDEA reached out to me
and asked if I wanted to partner up for a video. And I saw the design and if you look here,
basically the window closes and separates basically all of the noisy parts of the air
conditioner. Relax Koda, I know it's hot. And has this on the inside. And to top it off,
you can actually open your window if you wanted to with this installed. So when I saw that design,
I said, yep, I want to make a video. And that's what we're doing right now. So this one does up
to 350 square feet, which is probably a little overkill for my room. But that's great because
like this week, there's a heat wave. Today it was 100 degrees. And you know, this should cool the
room down really quick. A couple features right off the bat that are that are nice. Like I said,
the ultra quiet operation, you can open and close your window whenever you want. It has smart
control, which you can operate this with your voice. It also has a remote, which is nice sitting
on the couch. You want to turn it on, you can do that. You can do it from your phone. Inverter
technology, which makes it 35% more energy efficient. Like it says here, $39 a year operating
cost. And that is based on eight hours a day for about three months. So that's pretty awesome. That
is pretty inexpensive to me. I know when I blast my ACs in the summer, my bills skyrockets. So
hopefully that will help with that. This is the window that I'm going to be installing this in.
And the size that the window needs to be is between 22 and 36 inches. And it looks like
mine is like 32 and a half inches. So I'm right where I need to be. And then the height
has to be a minimum height of 13.75 inches. Obviously, I have enough room. In fact,
that's 22 inches. So if your window doesn't open past 13.75, then this probably will not work for
you. This will work for single hung and double hung windows. And they actually provide some
mechanisms to lock the window in place if you choose to use them. All right, let's open this up.
And we have some stuff. All the paperwork. Here's the main mounting bracket that's
going to hold the AC. We're going to have some other pieces. Now, don't get intimidated by the
amount of mounting hardware. This is going to be easy, I promise. There's a lot of steps,
but they're very easy. I'm going to make it super simple for you.
Then we have some foam blocks to help block off the airflow after we install it.
Some screws, more bracketry, bolts. So you only need one of those bags. This one is extra,
which is nice to have extra pins and screws. You'll see where those go later. And we have a
remote with some batteries. This is one thing I love, is that they supply a ton of foam pieces
and strips to help block off the outside air and seal it up for, you know, bugs and all that
kind of stuff. That's really awesome that they include that. And of course, we have the air
conditioner itself. And as always, I do recommend two people to help you with this.
I'm just by myself right now, so we're going to make it work.
Here are the tools that I'm going to recommend using. We got a drill with an eighth inch drill
bit, a Phillips screwdriver. This also has a flathead. You might need that. I'm probably
going to use an impact gun, a pencil, tape measure, small level, and I'm going to use this
old kitchen knife that I like to keep in my toolbox. Keep it nice and sharp. I'm going to
use that to cut the foam pieces. That should be about all the tools that you're going to need for
this. This is what we're going to start with. This is the main support bracket, and you're going to
need one of these pieces. And before I get too far into this, I want to show you what its purpose
is so you can understand it first. Basically, it goes in the window like this. These drop down
something like that, and this sits on the window. And then this piece sits against the side of the
house, and this is what holds the air conditioner up. And what would a nice, hot, humid day be
without an afternoon thunderstorm? You can see it poured just a minute ago, but this is basically
what happens. This sits right here. Those legs sit down here. Of course, you have to
adjust them out like this, and that supports the air conditioner. But there's a couple things we
need to do to this before we actually install it. And a little note for those of you who have storm
windows, the lip for the storm window is right here. So what you'll have to do is add a piece
of wood onto the windowsill to make that even, and then you can put your bracket on. You can still
install the AC. You just have to put that piece of wood there. First, we can push in this button
and extend this out and get it to these holes on this side. And then these brackets,
the long one is for window openings between 26 and 36 inches, and the short one is for
window openings between 22 and 26 inches. So I'm going to be using this one,
and I want to put it in the opposite end. You see how this bracket is. You want to put this the same
way. So I'll put this in here like that, and then you can adjust this a little bit about there.
Now I'm going to flip this around, and I'm just going to take these pins out right here. They have
this little cotter pin right here. Put that aside.
Both sides. Take those pins out. Those are going to lock these brackets. Now over at the window,
I'm going to go and measure this just like this. I'm going to find the center of this window.
This is just about 34 inches. So half of 34 is 17. So I'm just going to measure and mark with a
pencil. Really light mark so I can erase it afterwards. Just make sure it's good on the
other side. That's 17. So now we know that that is the center, and the distance between the center
and each side is 17 inches. Now we can come back over to the bracket, and you're going to see
this arrow right here. That is the center of this bracket, and we want to take that measurement of
17 inches, and I'm going to hold it right here to the center, and we want this bracket to go out
to 17 inches. So I'm going to push that button in and extend this and hook it on there. That looks
like just about 17 inches, and then you want to do the same thing for the other side. Now we can
open this window up and make sure these pieces are in here properly. They have a little lip right
here that slides in like that. I'm going to carefully flip this so that those brackets don't
fall out, and install this just like this. Adjust those feet a little bit for now. You can see the
bracket. See that arrow there? It's lined up with the center, and each side is nice and tight,
and you'll notice that my window has a lip here, and this will work for windows that don't have a
lip. This bracket will just have to be screwed in down through here and on each side, but this is
how it's going to work for mine. Good so far, Koda? Now if you were gonna put this on a window that
didn't have this lip, you can use these foam pieces on the bottom of this bracket. So they
peel off like this, and they stick. So stick those right to the bottom of the bracket where it's
going to sit. So this is where I'm going to use my eighth inch drill bit to pre-drill this hole
right here, and I'm going to use these half inch screws that they provide, and if you're attaching
this flat here, you would want to use the one inch screws going down here, and the half inch screws
going this way. But my window has the lip, so I'm just going to attach the half inch right here.
Do the same on the other side. All right, now I'm outside in the rain. Excuse the noise from
the traffic. I'm going to take my handy level and put it right here, and you'll notice that these
feet are touching the siding. If you have maybe a rock face or something, this might be a little
tricky. You might have to adjust these uneven, but the thing that you want is for this level
to show that the bracket is either level or just tilted down this way a little bit so that it can
drain. So I'm going to get this to a point where it's level, and then I'm going to drop it down
one, and I need to line up that hole right there. Okay, so now when weight is put on that,
you can see that it's about a quarter bubble, so that's perfect. I might even put a piece in here,
a shim. I don't think I have to. I have this sitting on there enough, I think,
and this will support some of the weight right here. And then we're going to go ahead and put
the cotter pin through here, just like that. And now you can see right here that these are marked
with numbers. It might be a little hard to see. This hole would be four. See, it says three.
That'll be four, and then that's five. So I'm going to go to the other side and put that in
number five. Line that hole up, put the pin through, and then install the cotter pin.
I'm going to open this window up, and this is where I suggest you have somebody help you
put this into place. Sit that right on the bracket. You just want to adjust
the AC in a way where it looks close to where you can bring the window up and down.
Looks good. You can see on the bottom they have, like, these tracks right here that are kind of
cut out of the AC, and they sit on the bracket so you know you're in the right place. Okay, now
this is where these brackets come in, and they attach in this screw hole right here,
just like this, and then the other part attaches to this bracket. So you use half-inch screws that
look like this right here, and you can attach this screw to this bracket. Make sure that's tight.
Do the same thing on the other side. Now we're going to install our foam pieces that block
this off. These are some brackets that flip down, and the foam goes right inside here, and then
sits against this, sits down here. What you want to do is get a measurement between here and the
inside of here, and then you want to add a quarter inch to it, and you can cut your foam piece.
You might also notice that I added some foam pieces here. I actually don't think I need that,
but you may, so just basically seal up any air gaps that you might have.
My measurement is seven and three-eighths, so I'm gonna measure seven and three-eighths,
and then add a quarter inch, seven and five-eighths. Then I always like to have a nice sharp
kitchen knife, an old kitchen knife available in my toolbox, and I'm going to use that to cut this
foam piece. Now if you installed this AC where you don't have that lip on the bottom of the window,
so the bracket goes flat to the sill, you're going to want to add this piece. Just peel this off,
stick it, and cut it to length. Now I'm going to take this foam piece that comes with it,
I'm going to peel this here, and I'm going to start it like this, about that far up,
and then wrap it like this, and I'm going to use some scissors to cut it off even right there.
I actually had to move this foam piece to the other side. It peels off pretty easy.
Just make sure that this is facing in towards the house, this sits in this bracket like this,
and then that flips down, and push it into place. So what you want to do is make sure that
your foam piece is even with this, and it goes even across here, and that that foam seal
is touching the back of the bracket, sealing all that up nice. You might have to
make some custom cuts around your window depending on how it is. Like this one, I'm going to tuck
some foam pieces behind here just to make sure that's sealed up, but that's how you do the foam
pieces. I'm going to do the same thing on the other side. Now on the back side of the unit here,
there is an anti-tip bracket. You want to take this screw out right here, and then that bracket
actually fits in the window track right here to obviously stop it from tipping.
Anti-tip bracket, cool feature. Now I can extend this, goes over that foam piece,
push that in there, reinstall the screw, and do the same thing on the other side.
Now to seal against here with your window sash, if you have a sash that's flat,
you can use the stuff that is supplied, but mine has this big lip right here that
is meant to seal against the original window. So down here it's not going to work. You want to seal
up in here. So I'm actually going to run to the store and grab a nice thick piece of insulating
foam with a sticky back that I can put right here, and that will seal that gap right there. You see
that's being stopped back there because of this piece, so I want to bring that out
so that'll have a nice seal right there. Here's the foam I'm going to use. This stuff expands up
to an inch and then can be compressed down to like an eighth of an inch, so this stuff will be
perfect. Okay, let's see. Nice. Now the last air gap that you would want to fill up
is right here in between the two sashes, and you can use the supplied foam and just
tuck it in there like this, nice and neat while you're using this thing. But I'm going to leave
this out because I want to show off how cool this is that you can open up your window and still have
the AC in there. And as a note, right here is the track for the screen. I actually have a full screen
that I just had to take out. I'll throw that up in the attic for now, but it looks like a half
screen. If you kept a half screen in here, you could bring it down to here. Now we can talk about
security features. On the back side, you can kind of see in the reflection, there is a tab that comes
out like that that will stop. Even if you didn't have this handle, it would stop against the lip
of the window. And then same on the other side, just like that. And then as an extra piece of
safety, they give you this bracket, which you can screw into the other sash, or depending on how
your window is set up, you can set it up like this and screw in this way. If you want to use that,
you definitely can for a little added security. That way, if you wanted to lock this up nice and
tight, it would be nice and secure. Okay, it's plugged in, ready to go. And you have all the
functions on here. You can control it from the remote, or you can control it from the app, or
you can even control it from voice. You can connect it to a smart device. So let's see.
Turn it on. There it goes. Different modes. Cool. It's obviously just air-conditioned.
Dry, it acts as a dehumidifier. Fan, just a regular fan. Different fan settings.
A sleep mode. And that is really quiet. There's the temperature. Go all the way down. Very cool.
Now you have this swing, and what happens when you do that is this louver goes up and down,
gives it kind of a more natural breeze, so it's not just blowing right in your face.
Okay, I'm going to put this on high. Yeah, this is nice. I'm like on the other side of the room,
probably about 20 feet away, and I can actually feel this breeze. Nice and cool. And of course,
question is, is it cool? So that's showing 48, jumping up to 49, but yeah, 47. So the answer is
yes, it is cool. It's been about 10 minutes, and it's already really cooling off in the living
room. To control the unit using voice, you'll have to connect it to whatever device you have.
I'm not going to say her name so that all of your devices go off, but you would set it up that way,
and to control it with the app, there's a manual right here that goes through step by step,
gives you all the information you need. You scan this QR code into your device, into your phone,
set up your account, and then it gives you all kinds of things, all different kinds of ways to
control the AC. It gives you, obviously, temperature. You can change all the functions that are on the
front, but it also gives you data on kilowatt usage, gives you these graphs, lets you set up
schedules. Very cool. Looks like a pretty thorough app. All right, so my thoughts on the MEDEA 8000
BTU Smart U Inverter Window Air Conditioner. That's a long name, but that's not what I'm going
to talk about. What I'm going to talk about is if I like it or not. So I've had it for about a week,
and what I look for in an air conditioner is if it's cold and it works. This thing definitely
works and it's definitely cold. It cools this living room down and dining room in about 10
minutes. I leave it on low and it works all throughout the night, all throughout the day,
and in that respect, it is awesome. Obviously, the coolest thing about this is that you can
open your window, which is nice because if you have a really nice day, you want some fresh air,
especially if you only have one window. That is a great feature about this thing. Another thing
that separates it from a lot of other window ACs is that it is quiet. All the operation is outside,
and before when we had our AC, I would really have to crank the volume on the TV in order to hear
that over the air conditioning. But with this thing, I don't have to do that. I can leave it
on low and this place is nice and cool and I can hear the TV just fine. And as far as installation
goes, there's a couple more steps than a regular AC, but it actually makes it easier. If you've
ever installed an AC, you know what I'm talking about where you're holding this AC up and then
you put it in the window and you have to hold the air conditioner and try and pull the window down
at the same time without pinching your fingers. And then you have those flimsy flaps on the side
and you can hear just all the road noise. You can hear a lot of road noise here because the road is
literally like eight feet or ten feet from my window, but it does cut down a ton of the noise.
You have these nice thick foam blocks. This is way less sound than those flimsy flaps on the
sides of most air conditioners. Another thing I love is that I can sit on my couch and call out
her name, which I will not say, and say turn the air conditioner on. It turns it on. You can make
temperature adjustments and all kinds of stuff with just speaking. The app is really cool. It
has a ton of features in there and it was really easy to set up. You just scan that QR code,
run through the instructions, set up your account, and you have access to all kinds of really cool
features for this thing. So overall, I love this air conditioner and I'm recommending it to you
and you guys know that I don't recommend anything that I don't think that you would benefit from. So
I do recommend this air conditioner. I love that it cuts down the noise. You can open your window,
which is unbelievable. I've never seen that before with any other air conditioner,
and it's quiet. I can watch TV and be cool at the same time. So awesome. I hope you enjoyed this
video and I hope it helped you out. If you needed some help installing this, hopefully I made it
really easy for you. I try to in all my videos, and if you want this AC, I'll leave a link in the
description over to where you can buy it. That is an affiliate link, so I'll get a small commission,
which helps support this channel so I can make more videos like this. Speaking of more videos,
if you want to see those, I'll leave one here or here-ish, and if you haven't subscribed yet,
definitely consider it. I really appreciate it. Thanks for watching and we'll see you on the next
one. Turn air conditioner on.
