How a Woodworking Master Makes Bowls

How Do You Do It?
70 followers
25 Video Views·Dec 2, 2022
A lot of people don't know what woodturning is.
Woodturning has been around for a long time. It's actually completely different from flat work.
There's a certain misconception that you have to be really strong and muscular.
Woodturning is more about finesse than anything and really having the feel of the cut more than
strength. So the first thing that I'm going to do is choose the pieces of wood that I want to make
bowls out of. Starting with a log, I would chainsaw it into a slab.
I'm actually making quite a lot of decisions about the final piece with the chainsaw.
How the grain is going to run through the piece, how balanced it's going to be,
how tall the piece is going to be, how wide it's going to be, all those things are happening
with the chainsaw. I've got two nice chunks here. This log was actually sitting in my yard for a few
weeks, so there's some really cool striations and cool coloring in here. I'm just going to
mark out where the circle is going to be. I'll cut off the sides of it with the chainsaw, basically
as much weight as I can remove as possible to make it easier for me to handle the piece before
Woodturning is a process of making wood round. Turning, I would say, is more about feel.
It's more about creating a pleasing curve. That's the simplest definition of what woodturning is.
When a tree is first taken down, it's full of water. As it starts to dry, it's going to start
to crack. So ideally, I'm going to be able to start working with it as quickly as possible
after the trees are taken down. The wood that I use to make my bowls is all locally salvaged wood.
I'm able to get the wood and then give it a new life. I don't do anything with straight lines and
right angles. I hate measuring stuff. I like flowing forms or organic shapes as opposed to
angular ones. The first step is to put the piece on the lathe, what's called between centers. So
it's just being held between two points. A lathe is my primary tool. It's a machine that spins
wood around really fast, and I cut it and shape it while it's spinning. It's folded to the floor.
It's not going anywhere. Rough turning is a way of taking a chunk of wood from a round slab and
then turning it into a bowl shape. I studied art in school. I studied sculpture and installation
art. I knew that I wanted to make a living making things with my hands, but I didn't know exactly
what direction I was going to go in. The first year was a struggle. There were lots of days I
would go to the farmer's market and not sell anything and still have to pay rent.
And I kept at it.
I met this guy whose name is Stuart Batty. He grew up turning in the trade in England,
so he learned woodturning from his dad who learned it from his dad.
I would say after working with him and having that apprenticeship, I really learned how to turn.
You can think of a tree like it's a big bundle of straws that's carrying all the nutrients and
the water up from the soil. Those straws, the grain of the wood, is full of water. It's going
to be really heavy. It's going to be wet. When you first put the wood on the lathe,
it's going to be spraying water everywhere as it's spinning.
Oh gosh, what can go wrong? I'd say pretty much every stage of the process is dangerous.
If you don't have the piece of wood securely mounted on the lathe, it can fly off
and it could potentially hit you and cause a lot of damage.
Sharpening my tools is something that I do every day, multiple times a day.
When I'm working on my production work, I don't turn the grinder off because I have to sharpen
so frequently. It doesn't take very long for me to turn through miles of wood as that lathe is
spinning. I'll hollow out the inside of the bowl, making sure to leave enough thickness.
Wood is a living thing. It's constantly moving.
What happens as the wood is gaining or losing moisture? So when I first get the wood that I
work with for making bowls, and it's full of moisture, it's going to move quite a bit,
and as it loses that moisture, it's going to change shape.
But when I'm turning, I have to account for that.
After that piece of wood is done drying, I turn it into a bowl shape.
There's a certain thickness that I'm aiming for all throughout so that
I'm going to be able to still get a nice, perfectly round, pretty bowl at the end of the day.
I like to mark what kind of wood it is and the date that I've turned it on the outside in pencil.
I would wax the entire surface of the bowl. I want to try and slow down the drying process
in order to minimize cracking in the wood as it dries. The wax helps me to maintain
an equilibrium of the moisture content throughout the piece of wood as the wood is drying.
It's a coating on the outside of the wood that will allow some moisture to escape slowly over
a prolonged period of time and create more of that equilibrium within the piece of wood.
So once it gets to that stage, then it's a matter of waiting for a really, really long time.
A wooden bowl is going to take several months to a year, at least, to dry before it's ready
for finished turning. You can see this one was rough turned in 2010. This is a live oak.
So this one here, I feel like, is a really good example of just how much the wood moves
as it dries. You can see, though, over time how it's moved, how it's elongated. If you look at
the rim, the part where the center of the tree was is usually going to come up as it dries,
and the sides tend to go down. In the drying process, the first few months, I would say the
first three or four months, are going to be sort of the crucial time period. Within that period,
the wood is going to do most of its moving, most of its changing shape,
and I really need to check on the bowls probably every three to four days and make sure I don't
see any cracks starting to form. If cracks do start to form, ideally, I want to catch them
as quickly as possible, and I'm just going to put a little bit of glue in there to keep them
from spreading. Having a mentor, having somebody to learn the techniques from, was crucial for me.
Before I started that apprenticeship, I was struggling. I was using way too much muscle
and way too much force. I would not have lasted as a woodturner had I not learned a good set
of techniques. I think it just makes sense to learn from somebody, to seek out somebody who
you respect and admire in the field, somebody who you think does good work, and try and learn from
them however you can. I like to create shapes in woodturning that almost look like they were
additive, when in fact they're subtractive. The bowls that I make generally don't have a very
rustic look. I like to get a really nice finish on my bowls. I like them to be
crisp and sharp. I like it to be obvious that they're intentional, that the artist meant for
them to be there. Woodturning, my dad calls it male, pale, and stale. It's, you know,
it's generally a lot of older white men. When I got started, I think there was maybe two to three
percent of the membership of the American Association of Woodturners was female.
A big reason that there isn't as much diversity in woodturning is because people don't see
diversity. It's one of those like chicken and egg kind of things. So I would say that the more
women start to come to the forefront of woodturning, the more it's going to start to diversify.
Once the bowl has been completely turned and sanded, then it's time to apply a finish.
I like a finish that's very simple, that's easy to apply, and that's food safe.
I'm not really using any type of coloring or stain. I'm really just relying on the natural
color and the natural tones of the wood. I like to keep them simple and straightforward.
I would say it doesn't take a whole lot to learn how to make a piece of wood round.
I would say the skill comes in learning all of the different nuanced techniques,
the sharpening, and the stance, and the way you hold the tool, and where the force comes from,
and all those different types of little things wrapped up together. It takes lots of practice.
It takes lots of time. But once you put in that practice and that time,
you can get a cut that's almost flawless straight off the gouge.
